Abrasive Blaster Supervisor

Orbis Sibro, Inc.brookline, NH

Apply with Sonara

Automate your job search with Sonara.

Submit 10x as many applications with less effort than one manual application.¹

Reclaim your time by letting our AI handle the grunt work of job searching.

We continuously scan millions of openings to find your top matches.

Overview

Schedule

Full-time

Career level

Senior-level

Remote

On-site

Benefits

Health Insurance

Job Description

Job Description: The Supervisor position requires 5 years of experience as a supervisor in repair and maintenance efforts onboard U.S. Navy ships in the Trade Skill they are supervising and On-Site Supervisors must reflect the same (3 years) experience, training, and qualifications, as the Tradesperson they are supervising. These periods of experience cannot overlap.

Required Skills and Experiences: Supervisors shall possess 5 years experience supervising the following requirements:

Abrasive Blaster Typical Trade Task

a. Large scale abrasive blast removal of preservation coatings (e.g., high solids and non high solids paints) of interior and exterior submarine tanks (e.g interior storage tanks or external main ballast tanks).

b. Small and Large Scale abrasive blast surface preparation of external hull, free flood and superstructure surfaces.

c. Blast Equipment staging and set up.

d. Blast Media recovery.

e. Small area vacuum blasting of submarine hull or interior surfaces in preparation for painting.

Abrasive Blaster Trade Skill Requirements

a. Each Blaster shall have a minimum of two (2) years of experience performing abrasive blasting operations on/in commercial ship or U.S. Navy ships/submarines.

b. Each Blaster shall be trained and qualified to work with lead, cadmium, chromic acid/chromium, and arsenic as well as mixed solvents.

c. Each Blasters shall be certified in accordance with SSPC C-7 or NAVSEA-approved equivalent (Contractor must specify and provide).

d. Each Blaster shall be qualified in surface preparation and application of coatings of critically coated areas per NSTM S9086-VD-STM-030/Ch-631 V3R1 - Preservation of Ships in Service. Blasters shall also be familiar with the requirements for standards in SSPC-1, 5 and 10.

e. Each Blaster shall be trained at proficient in all aspects of blasting including the proper selection, control and maintenance of blasting and application equipment.

f. Each Blaster shall be trained and proficient to perform hazardous large scale blasting operations, in confined and awkward spaces, fully outfitted in coverall and positive pressure air fed blast hoods, and to work safely in dusty and darkened tanks and voids.

g. Each Blaster shall have appropriate medical stressors to allow working with "black diamond" compounds. As a minimum, this will include 29 CFR 1910 medical exams for 121 Beryllium, 124 Cadmium, 133 Chromic acid/Chromium, 161 Lead, M112 Arsenic, 208 Cobalt, 603 Mixed Solvents, 172 Nickel, and 187 Silica (chrystalline).

h. Each Blaster shall be trained and qualified to select and wear respirator equipment (e.g., negative pressure respirators, air fed respirators and air fed blast hoods) where required.

i. Each Blaster shall be trained and qualified to wear safety harnesses and work from scaffolds/platforms or other awkward surfaces where required.

Degree Requirements:

Must be a U.S. citizen.

Automate your job search with Sonara.

Submit 10x as many applications with less effort than one manual application.

Apply with Sonara Apply manually

FAQs About Abrasive Blaster Supervisor Jobs at Orbis Sibro, Inc.

What is the work location for this position at Orbis Sibro, Inc.?

This job at Orbis Sibro, Inc. is located in brookline, NH, according to the details provided by the employer. Some roles may also include multiple work locations depending on the requirement.

What pay range can candidates expect for this role at Orbis Sibro, Inc.?

Employer has not shared pay details for this role.

What employment applies to this position at Orbis Sibro, Inc.?

Orbis Sibro, Inc. lists this role as a Full-time position.

What experience level is required for this role at Orbis Sibro, Inc.?

Orbis Sibro, Inc. is looking for a candidate with "Senior-level" experience level.

What benefits are offered by Orbis Sibro, Inc. for this role?

Orbis Sibro, Inc. offers Health Insurance for this position. Actual benefits may vary depending on the employer's policies and employment terms.

What is the process to apply for this position at Orbis Sibro, Inc.?

You can apply for this role at Orbis Sibro, Inc. either through Sonara's automated application system, which helps you submit applications 10X faster with minimal effort, or by applying manually using the direct link on the job page.