Tech 3, Mechanical Engineering

Our client, a leading Medical Device Manufacturing Company is looking for Tech 3, Mechanical Engineering and This is for an initial duration of 12 MonthsContract – Franklin Lakes, NJ.Job Title: Tech 3, Mechanical EngineeringReference ID: 26-00607Location: Franklin Lakes, NJ.Duration: 09 monthsJob Type: Contract (Candidates must be able to work on W2 without VISA sponsorship)Summary:

• Sr. Materials Technician understands and can discuss materials lab capabilities, terminology and concepts. In the Materials R&D group, the Sr. Technician will be responsible for conducting testing /experiments; writing technical reports; supporting test request work flow; operation of equipment in the materials characterization and testing labs; ensure compliance with quality policies, support lab audits, maintain calibration of equipment and overall health of the labs.
• The Sr. Technician understands procedures and practices through appropriate communication, training and education of sound quality assurance principles; ensure compliance with all local, state, federal and safety regulations, policies and procedures.

• Formulation Development. Performs batch mixing, compounding and extruding of various material types. They will interpret data to draw conclusions, identify trends and provide solutions.

• Performs batch mixing, compounding and extruding of various material types
• They will interpret data to draw conclusions, identify trends and provide solutions.
• Is involved in problem-solving and improvement of test plans.
• Oversees lab supplies stock and reordering, acts as primary purchase order processor
• Manages the chemical inventory and MSDS upkeep. Ensures timely removal of expired chemicals.
• Is able to find common ground within a team to optimize problem-solving outcomes.
• Communicates relevant and accurate information in a timely manner to enable effective decision-making.
• Submits final data to requester and/or archival in conjunction with the lab technicians.
• Executes Continuous Improvement projects in the following (but not limited to) areas
• Equipment or method troubleshooting/repairs
• May establish materials lab capability operating procedures.
• Coordinates Equipment Upgrades and installation
• Fixture development and maintenance
• Minimal supervisory assistance
• Is encouraged to develop/seek out new industry, company, product or technical knowledge.
• May use logic and methods to solve difficult problems.
• Has limited understanding on how to organize people and activities.
• Adds value and provides direction on the subject matter.
• Works under general supervision.
• Has limited technical and practical knowledge of test method development.
• Has practical knowledge of statistical analysis and test report generation.
• Has limited understanding of Code of Federal Regulations (CFR) Title 21 rules and procedures for Current Good Laboratory Practices (cGLP) .
• Has general understanding of R&D lab maintenance and housekeeping requirements.
• Understands training regimen for lab procedures, preventive maintenance and calibration.
• Has practical and technical knowledge of small hand tools and/or precision devices to aid in test.
• Has practical and technical knowledge of other common lab instrumentation and equipment.
• Accountable for lab operations, calibration and maintenance of equipment.
• May mentor/supervise Jr. technicians.

• Experience with polymer compounding (extrusion, batches mixing) and polymer processing (Injection Molding, compression molding and batch mixing is preferred.
• Knowledge of the operation of mechanical measurement equipment (e.g. Instron) and two or more materials characterization capabilities (ie. Coefficient of Friction, FTIR, SEM/EDS, DSC, TGA) is required.
• Superior attention to detail
• Superior communication skills, both written and oral.
• Understands regulatory and quality requirements and external Regulations (ISO, FDA, OSHA, ASTM). Maintains good laboratory practices

• Knowledge of statistical analysis desirable.

• Bachelor's Degree in a Science or Engineering discipline with a minimum of 2 years of laboratory experience.

• Knowledge of the operation of mechanical measurement equipment (e.g. Instron) and two or more materials characterization capabilities (ie. Coefficient of Friction, FTIR, SEM/EDS, DSC, TGA) is required.
• Experience with polymer compounding (extrusion, batches mixing) and polymer processing (Injection Molding, compression molding and batch mixing is preferred.
• Superior communication skills, both written and oral.
• Proficient in MS Office / Word / Excel / PowerPoint.
• Knowledge of statistical analysis desirable.
• Superior attention to detail.
• Understands regulatory and quality requirements and external Regulations (ISO, FDA, OSHA, ASTM).
• Maintains good laboratory practices.
• May require some lifting of resin barrels.

Compensation: The hourly rate for this position is between $31.00-$33.00 per hour. Factors which may affect starting pay within this range may include [geography/market, skills, education, experience and other qualifications of the successful candidate]. Benefits: Sunrise offers ACA compliant medical coverage/dental insurance/vision insurance to all employees. We also offer Sick time benefits as required per State regulations. Interested and Qualified candidates, please send your most recently updated word document resume to

Pavn.P@sunrisesys.com

Jaffer.s@sunrisesys.com