Auto-apply to these oil rig jobs

SUMMARY The primary duty of the Rig Operator is to work the controls and equipment on a rig. The Rig Operator supervises crewmembers while rig operations are in process, maintains productivity standards, and works closely with customer representatives to provide safe, reliable, and quality service. ESSENTIAL DUTIES AND RESPONSIBILITIES Promote RES concept of Stop Work Accountability Promote RES safety policies and procedures Perform Meet and Greet at location sites Be aware of Simultaneous Operations and able to coordinate vendor and contractor groups on location as needed Operate the rig safely during rig up/down and pulling operations Operate the crown and ground saver Check brake systems and confirm functionality Pull and lay down rods, tubing, casing, and other equipment as needed Understands job steps and arranges rods and tubing in derrick correctly Understand the rig's hydraulic, pneumatic and electrical systems Perform all required equipment inspections-workover rig, fall arrest system, derrick, hoisting, and mud pump Able to instruct floor and derrick hands in use of all safety equipment Able to instruct the floor and derrick hand in use of all rig and pumping equipment Operate the power swivel Perform Blowout Preventer (BOP) inspection, testing, and installation as needed Assist HSE, DOT, and all other applicable departments with document completion, collection, and management Complete field tickets in a timely manner and turn in to appropriate department for processing Troubleshoot maintenance issues; to include performing worn equipment recognition checks and turning in maintenance requests for repair or replacement of equipment as needed Accurately perform torque calculations and specs Perform JSA/DWP and tailgate meetings as scheduled Perform pipe tallying, rigging up and down, nipple up and down of BOP units, and pipe handling Responsible for keeping worksite, equipment, and tools clean and in good working order Perform day to day lubrication and minor adjustments of equipment Perform use of Hazard ID programs and means of documenting hazards Perform daily inspection and maintenance of equipment Perform and oversee energy isolation procedures Train and mentors crew members on day to day operations Responsible to stop work if conditions are unsafe and report concerns immediately Report all incidents as per the standard operating procedures Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS, AND EXPERIENCE High school diploma or equivalent, preferred 5 years of experience working on a well servicing rig preferred 2 years of experience as a relief operator preferred Must be able to successfully perform the duties of a Floor Hand III and derrick hand Must be familiar with pump and tank operations Must have a valid state-issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Competent communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule COMPUTER Basic knowledge of MS Office preferred Able to use the company's HSE Management Platforms PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment screening. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

Are you a detailed professional who excels in a manufacturing environment? Deciding on your next employer is not a decision to be made lightly. But if you want to work on the front lines of development, shaping the field as you go, keep reading to see what we have to offer! Our winning team is built by continuous investment in skills development, leadership and well-being. As a global company, we offer many career paths to suit individual needs and aspirations. Apply your expertise as a Drill Machine Operator in Columbus, MS. The drill machine operator is responsible for the set-up and running the roll drilling machine. You'll be required to remove and install bearing and processing heads for the set-up operation. Any adjustments on the machine or roll alignments are the responsibility of the operator to ensure the drilling of all required patterns. Any upgrades to the programing of the machine will also be required in addition to training other operators. Following all specifications within the job function will enable Valmet to provide a quality product to our customer. Expectations To excel in the role you should have a solid understanding of the manufacturing environment. You should possess strong mechanical skills and be able to understand and follow product specifications. You will balance a desire to support and work diligently on tasks along with your passion for development of cutting-edge products. A High School diploma or GED equivalent is required. Preferred individual will have a mechanical aptitude coupled with strong computer skills. We offer We offer a challenging work environment that values innovation and suits development-minded people who enjoy working in a fast-paced and dynamic setting. Includes a generous wage and benefits package that includes a 401k as well as company-funded pension. Please note that any offer of employment is contingent upon a background check and pre-employment physical and drug screen. Additional Information Delivering competitive technologies and services is what we do best. At Valmet, we continue to push forward and develop ourselves, concentrating on technology, services, sustainability, local presence, and our people. To be included in the recruiting process, please apply directly with us online. Where everything works together Valmet is where the best talent from a wide variety of backgrounds comes together. With 19,000 professionals around the world, we are the leading global developer and supplier of technologies, automation and services for the pulp, paper, and energy industries, and serve an even wider base of process industries with our automation systems and flow control solutions. Our commitment to moving our customers' performance forward requires creativity, technological innovations, service knowledge - and teamwork. Join the team! www.valmet.com/careers Please note that Valmet will never ask for personal financial information during the interview process. If you feel you have been a victim of an online job posting scam, please notify the Federal Trade Commission. Valmet is an equal opportunity employer. All employees and applicants for employment will not be discriminated on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. #LiOnsite

SUMMARY The primary duty of the Rig Operator is to work the controls and equipment on a rig. The Rig Operator supervises crewmembers while rig operations are in process, maintains productivity standards, and works closely with customer representatives to provide safe, reliable, and quality service. ESSENTIAL DUTIES AND RESPONSIBILITIES Promote RES concept of Stop Work Accountability Promote RES safety policies and procedures Perform Meet and Greet at location sites Be aware of Simultaneous Operations and able to coordinate vendor and contractor groups on location as needed Operate the rig safely during rig up/down and pulling operations Operate the crown and ground saver Check brake systems and confirm functionality Pull and lay down rods, tubing, casing, and other equipment as needed Understands job steps and arranges rods and tubing in derrick correctly Understand the rig's hydraulic, pneumatic and electrical systems Perform all required equipment inspections-workover rig, fall arrest system, derrick, hoisting and mud pump Able to instruct floor and derrick hands in use of all safety equipment Able to instruct the floor and derrick hand in use of all rig and pumping equipment Operate the power swivel Perform Blowout Preventer (BOP) inspection, testing and installation as needed Assist HSE, DOT, and all other applicable departments with document completion, collection, and management Complete field tickets in a timely manner and turn in to appropriate department for processing Troubleshoot maintenance issues; to include performing worn equipment recognition checks and turning in maintenance requests for repair or replacement of equipment as needed Accurately perform torque calculations and specs Perform JSA/DWP and tail gate meetings as scheduled Perform pipe tallying, rigging up and down, nipple up and down of BOP units, and pipe handling Responsible for keeping work site, equipment, and tools clean and in good working order Perform day to day lubrication and minor adjustments of equipment Perform use of Hazard ID programs and means of documenting hazards Perform daily inspection and maintenance of equipment Perform and oversee energy isolation procedures Train and mentors crew members on day to day operations Responsible to stop work if conditions are unsafe and report concerns immediately Report all incidents as per the standard operating procedures Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE High school diploma or equivalent, preferred 5 years' of experience working on a well servicing rig preferred 2 years' of experience as a relief operator preferred Must be able to successfully perform the duties of a Floor Hand III and derrick hand Must be familiar with pump and tank operations Must have a valid state issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Competent communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule COMPUTER Basic knowledge of MS Office preferred Able to use the company's HSE Management Platforms PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment drug screening, Urine, Alcohol, Hair Follicle and Physical, if applicable. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: The Rig Electrician is primarily responsible for planning layouts, installing, and repairing wires, electrical fixtures, and rig control equipment. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you need: The worker must be at least 18 years of age The worker must pass a post-offer physical examination This position requires between three and five years of prior electrical or electronic controls experience in order to be oriented to skills required in servicing drilling machinery and equipment The worker must have proper legal authorization to work in the country where the rig is operating Steel-toe work boots Passport (International positions only) Application Deadline: Applications are accepted on an ongoing basis. The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. Comprehensive medical, dental, vision, and life insurance Flexible Spending or Health Savings Accounts 401k match Paid Leave Plans Parental & Adoption Benefits Disability Coverage Employee Assistance Program Educational Assistance Learning & Development Opportunities Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: The Rig Mechanic is primarily responsible for repairing, maintaining, and installing oil well drilling machinery and equipment. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you need: The worker must be at least 18 years of age The worker must pass a post-offer physical examination This position requires between three and five years of prior mechanical equipment or hydraulics experience in order to be oriented to skills required in servicing drilling machinery and equipment The worker must have proper legal authorization to work in the country where the rig is operating Steel-toe work boots Passport (International positions only) Application Deadline: Applications are accepted on an ongoing basis. The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. Comprehensive medical, dental, vision, and life insurance Flexible Spending or Health Savings Accounts 401k match Paid Leave Plans Parental & Adoption Benefits Disability Coverage Employee Assistance Program Educational Assistance Learning & Development Opportunities Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: The Rig Electrician is primarily responsible for planning layouts, installing, and repairing wires, electrical fixtures, and rig control equipment. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you need: The worker must be at least 18 years of age The worker must pass a post-offer physical examination This position requires between three and five years of prior electrical or electronic controls experience in order to be oriented to skills required in servicing drilling machinery and equipment The worker must have proper legal authorization to work in the country where the rig is operating Steel-toe work boots Passport (International positions only) Application Deadline: Applications are accepted on an ongoing basis. The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. Comprehensive medical, dental, vision, and life insurance Flexible Spending or Health Savings Accounts 401k match Paid Leave Plans Parental & Adoption Benefits Disability Coverage Employee Assistance Program Educational Assistance Learning & Development Opportunities Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

Job Description Job Title: Pump Rig Helper Department: Drilling Reports to: Pulling Unit Superintendent Location: Florence AZ The Pump Rig Helper assists in the operation, maintenance, and repair of pump rigs used in operations. This role involves supporting the setup, monitoring and troubleshooting of pump systems to ensure efficient extraction processes. Responsibilities: Assist in setting up and dismantling pump rigs and related equipment. Ensure proper alignment, connection, and testing of hoses, pumps, and pipelines. Regularly check pump rig systems to ensure they are functioning efficiently. Assist in basic maintenance tasks, such as lubricating parts, replacing filters, and inspecting hoses for leaks or wear. Report any issues or malfunctions to the Pump Rig Operator or Supervisor. Work closely with the Pump Rig Supervisor and other team members to meet operational goals. Assist transporting tools and materials needed for rig operations. Help trouble shoot operational issues under supervision Provide input during on site challenges to ensure smooth operations Safety and Compliance Follow all safety protocols, including wearing appropriate personal protective equipment Maintain a clean and organized worksite to prevent accidents Adhere to environmental and regulatory guidelines specific to the operations. Qualifications High school diploma or equivalent Basic mechanical skills and understanding of pump systems Experience in mining, construction, or industrial settings is an advantage Ability to lift and carry heavy equipment and materials Strong attention to detail and commitment to safety Working Conditions Outdoor work in various weather conditions Exposure to noise, dust, and heavy machinery May involved extended hours and shift work depending on project demands

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: The Rig Mechanic is primarily responsible for repairing, maintaining, and installing oil well drilling machinery and equipment. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you need: The worker must be at least 18 years of age The worker must pass a post-offer physical examination This position requires between three and five years of prior mechanical equipment or hydraulics experience in order to be oriented to skills required in servicing drilling machinery and equipment The worker must have proper legal authorization to work in the country where the rig is operating Steel-toe work boots Passport (International positions only) Application Deadline: Applications are accepted on an ongoing basis. The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. Comprehensive medical, dental, vision, and life insurance Flexible Spending or Health Savings Accounts 401k match Paid Leave Plans Parental & Adoption Benefits Disability Coverage Employee Assistance Program Educational Assistance Learning & Development Opportunities Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

Company: Precision Drilling Location: West Texas (Midland-Odessa) Summary The Field Superintendent is responsible for overseeing and managing drilling operations for their geographical area. This role is critical in overseeing land-based drilling operations in accordance with company, operator, and regulatory bodies' policies. Responsibilities Technical Operational Excellence: Leverage internal and external company support systems to maximize operational outcomes. Manage resources to proactively plan upcoming operations. Analyze reports and coordinate follow-up as appropriate. Regularly inspect equipment, tools, and operations; work closely with Rig Managers to identify, track, and resolve all rig equipment issues. Assist Rig Managers in troubleshooting and all maintenance procedures. Ensure all equipment tracking is accurate. Have a consistent active field presence at rig sites to evaluate and provide proactive feedback to the Rig Managers and monitor operations. Improve the level of service to customer performance, establishing benchmarks and ensuring target KPIs are met. People Leadership: Lead all aspects of the employment cycle, including hiring, onboarding, development, performance management, discipline, and employee relations. Maintain full rig staffing through proactive workforce planning, crew management, and development of a strong talent pipeline by conducting behavioral interviews and crew assessments to ensure personnel meet company standards and operational needs. Set clear performance expectations and KPIs for Rig Managers; provide coaching, feedback, and accountability to drive results and uphold Precision standards including follow up when gaps identified. Evaluate leadership and crew competencies to identify training needs, ensure completion of required courses, and maintain full compliance with company and client requirements, including critical certifications. Partner with HR and Field Training teams to manage employee relations, address ethics concerns, and develop and mentor Rig Managers, Drillers, and high-potential employees to strengthen the talent pipeline. Safety Performance: Maintain the standard of safety excellence. Ensure crew training is completed and compliant with Company standards. • Assist in HSE audits, develop and monitor corrective actions, and assist in incident investigations. Participate in effective safety meetings with good communication, discussing safety trends and concerns. Customer Service: Communicate regularly with the operator's representatives in areas of well planning, operations, and personnel. Elevating both opportunities and concerns. Support the administration of current contracts regarding reimbursable charges, labor increases, and operational summaries to ensure timely invoicing in these areas. Collaborate with the Sales on evaluation and preparation of customer interactions. Work with Sales to negotiate contracts, provide cost estimates, trucking bids, and ensure billing accuracy. Manage the customer relationship through positive and negative situations. Embracing multiple points of contact and support. Resolving customer conflict and appropriate resolution. Engage with customers, review drilling programs, and ensure rig capabilities meet or exceed requirements. Financial Management: Attend company-directed training, reviews, and utilize resources to close gaps identified in billing processes. Oversee rentals, purchase orders, and work orders, verifying accuracy, timeliness, and compliance with corporate policies. Manage capital and operating expenditures to meet budget and profitability targets, reviewing financial performance monthly with Rig Managers and ensuring adherence to SOX and other financial controls. Knowledge & Skills Working knowledge of mud pumps, engines and top drives. Possess excellent communication skills and able to lead by example. Working knowledge of MS office: Word, Excel and e-mail.• Ability to stay highly motivated and inspire others. Ability to demonstrates a well-defined sense of diplomacy. Ability to multitask. Ability to adapt to and learn fast new software. Able to work well under pressure and meet set deadlines. Ability to be resourceful, flexible, and adaptable. Ability to keep up to speed on new technology. Education & Experience High school diploma or GED required; engineering or technical degree/diploma considered an asset. Minimum of 3+ years' experience in oil well drilling in a Rig Manager capacity, with at least 2 years working in U.S. drilling operations. 10+ years of experience in the drilling/oilfield industry preferred.

SUMMARY The Rig Supervisor manages crew members, maintains productivity standards and works closely with customers ensuring that quality products and services are being safely provided. The Rig Supervisor will need to be able to exhibit working knowledge of all parts on a Workover Rig and should be able to troubleshoot the mechanics of the rig and equipment on site. ESSENTIAL DUTIES AND RESPONSIBILITIES Communicates with the management team on the logistics and workflow of rig Works closely with District Manager with regard to the manning and scheduling of the rig, operational, and personnel matters Provides proper guidance and direction to rig crew on job tasks to be performed Performs BOP inspection and testing as needed Assist HSE, DOT, and all other required departments with document management Operates the power swivel, crown and ground saver if needed Accurately perform torque calculations and specs Performs fall protection donning and doffing as required Assist in racking of rod tubing if needed Performs daily operation of the Tong's if needed Pulls and lays down rods, tubing, casing, and other equipment as needed Responsible for keeping work site, equipment, and tools clean and in good working order Ability to understand Hazard ID cards and near hit cards, as well as follow standard operating procedure for completion of cards Assist in the daily inspection and maintenance of equipment Successfully perform elevator handling, hardline construction, and energy isolation procedures Ensure efficient maintenance and utilization of all equipment Train, mentor and demonstrate proper utilization of down-hole tools, power swivels and compressors Track costs, labor and revenues associated with jobs. Provide weekly cost analysis to the operations manager to ensure budgets components are met, as well as time constraints Maintain and coordinate repair of all equipment and tools Provide technical assistance, supervision and training to other team members on location to ensure work is carried out according to set schedules and procedures Establish and maintain a positive work environment for rig crew, including training and coaching them in carrying out their assigned duties Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE 5-8 years' of experience working on a well servicing rig preferred Must be able to successfully perform the duties of a rig operator, floor hand, and derrick hand Must be familiar with pump and tank operations Must have a valid state issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Ability to show knowledge of running tongs and all other Ranger Energy equipment Good communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule Must be legally authorized to work in the United States COMPUTER Proficient knowledge of MS Office preferred PRE-EMPLOYMENT REQUIRMENTS Must complete and pass all required pre-employment screenings. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

SUMMARY The Rig Supervisor manages crew members, maintains productivity standards and works closely with customers ensuring that quality products and services are being safely provided. The Rig Supervisor will need to be able to exhibit working knowledge of all parts on a Workover Rig and should be able to troubleshoot the mechanics of the rig and equipment on site. ESSENTIAL DUTIES AND RESPONSIBILITIES Communicates with the management team on the logistics and workflow of rig Works closely with District Manager with regard to the manning and scheduling of the rig, operational, and personnel matters Provides proper guidance and direction to rig crew on job tasks to be performed Performs BOP inspection and testing as needed Assist HSE, DOT, and all other required departments with document management Operates the power swivel, crown and ground saver if needed Accurately perform torque calculations and specs Performs fall protection donning and doffing as required Assist in racking of rod tubing if needed Performs daily operation of the Tong's if needed Pulls and lays down rods, tubing, casing, and other equipment as needed Responsible for keeping work site, equipment, and tools clean and in good working order Ability to understand Hazard ID cards and near hit cards, as well as follow standard operating procedure for completion of cards Assist in the daily inspection and maintenance of equipment Successfully perform elevator handling, hardline construction, and energy isolation procedures Ensure efficient maintenance and utilization of all equipment Train, mentor and demonstrate proper utilization of down-hole tools, power swivels and compressors Track costs, labor and revenues associated with jobs. Provide weekly cost analysis to the operations manager to ensure budgets components are met, as well as time constraints Maintain and coordinate repair of all equipment and tools Provide technical assistance, supervision and training to other team members on location to ensure work is carried out according to set schedules and procedures Establish and maintain a positive work environment for rig crew, including training and coaching them in carrying out their assigned duties Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE 5-8 years' of experience working on a well servicing rig preferred Must be able to successfully perform the duties of a rig operator, floor hand, and derrick hand Must be familiar with pump and tank operations Must have a valid state issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Ability to show knowledge of running tongs and all other Ranger Energy equipment Good communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule Must be legally authorized to work in the United States COMPUTER Proficient knowledge of MS Office preferred PRE-EMPLOYMENT REQUIRMENTS Must complete and pass all required pre-employment screenings. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

General Requirements: Preferred current IUOE member but not required Willing to join the local IUOE union Preferred experience on multiple types of rigs and equipment Alignment to Clark Standards of Excellence: Self-Motivated, Results Oriented, Adaptable, Team Player, Accountable, Ethical, Innovative, Resilient, Builds Relationships Large Diameter: Preferred experience with Soilmec, Bauer, Cassagrande, CZM and Liebherr equipment Experience (Prefered) Drilled soldier beams Caissons CFA Cassed drilling operation (including segmental) DTH Hammer Operations (Mono and Cluster) Multiquip driving rigs Small Diameter/Anchor Rig: Prefered experience with Comacchio, Klemm, and Cassagrade equipment Experience (Prefered) Mud and cased anchor operations Micropiles (single and double head duplex drilling) DTH Hammer Operations Water Well Drilling Pile Driving/CFA Crane: Prefered experience with Linkbelt, Mantis and Liebherr cranes Experience (Prefered) Driven Pile (Diesel, Hydraulic and Vibratory Hammers) Swinging and Fixed Lead CFA operations General steel installation hook work Pay: $25.00 - $40.00 per hour

SUMMARY The Rig Supervisor manages crew members, maintains productivity standards and works closely with customers ensuring that quality products and services are being safely provided. The Rig Supervisor will need to be able to exhibit working knowledge of all parts on a Workover Rig and should be able to troubleshoot the mechanics of the rig and equipment on site. ESSENTIAL DUTIES AND RESPONSIBILITIES Communicates with the management team on the logistics and workflow of rig Works closely with District Manager with regard to the manning and scheduling of the rig, operational, and personnel matters Provides proper guidance and direction to rig crew on job tasks to be performed Performs BOP inspection and testing as needed Assist HSE, DOT, and all other required departments with document management Operates the power swivel, crown and ground saver if needed Accurately perform torque calculations and specs Performs fall protection donning and doffing as required Assist in racking of rod tubing if needed Performs daily operation of the Tong's if needed Pulls and lays down rods, tubing, casing, and other equipment as needed Responsible for keeping work site, equipment, and tools clean and in good working order Ability to understand Hazard ID cards and near hit cards, as well as follow standard operating procedure for completion of cards Assist in the daily inspection and maintenance of equipment Successfully perform elevator handling, hardline construction, and energy isolation procedures Ensure efficient maintenance and utilization of all equipment Train, mentor and demonstrate proper utilization of down-hole tools, power swivels and compressors Track costs, labor and revenues associated with jobs. Provide weekly cost analysis to the operations manager to ensure budgets components are met, as well as time constraints Maintain and coordinate repair of all equipment and tools Provide technical assistance, supervision and training to other team members on location to ensure work is carried out according to set schedules and procedures Establish and maintain a positive work environment for rig crew, including training and coaching them in carrying out their assigned duties Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE 5-8 years' of experience working on a well servicing rig preferred Must be able to successfully perform the duties of a rig operator, floor hand, and derrick hand Must be familiar with pump and tank operations Must have a valid state issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Ability to show knowledge of running tongs and all other Ranger Energy equipment Good communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule Must be legally authorized to work in the United States COMPUTER Proficient knowledge of MS Office preferred PRE-EMPLOYMENT REQUIRMENTS Must complete and pass all required pre-employment screenings. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

At H&P, our people are our strength. Since 1920, Helmerich and Payne has been the industry's most trusted partner in drilling productivity and reliability. As the world changes, so does our approach. We are changing the landscape of drilling by using cutting-edge rig technologies and drilling solutions to build upon a century of success, all while continuing to deliver better outcomes for our customers. At H&P, our people are our strength. We strive to continually lead with our Core Values that enable employees to develop on their H&P Journey. We believe that doing the right thing means creating a more diverse, equitable, and inclusive workplace that empowers our people to bring their authentic selves to work every day. Some companies offer career paths. We offer a Journey of a Lifetime. Let's go far, together. Hear directly from our employees, and leaders about their unique journeys at Helmerich and Payne. At a Glance: The Rig Mechanic is primarily responsible for repairing, maintaining, and installing oil well drilling machinery and equipment. Location: Odessa, TX, Tyler Texas, Oklahoma City, OK, Grand Junction, CO, Dickinson, ND, Barnesville, OH Work Type: Onsite #LI-Onsite What you need: The worker must be at least 18 years of age The worker must pass a post-offer physical examination This position requires between three and five years of prior mechanical equipment or hydraulics experience in order to be oriented to skills required in servicing drilling machinery and equipment The worker must have proper legal authorization to work in the country where the rig is operating Steel-toe work boots Passport (International positions only) Application Deadline: Applications are accepted on an ongoing basis. The Colorado Equal Pay for Equal Work Act requires employers in the State of Colorado to disclose the following information. If the position applied to is not located in Colorado, the following information may not apply. In accordance with applicable law, the following represents H&P's good faith estimate of the hiring compensation range for this role. Actual compensation will vary and may be above or below the range as permitted by the Colorado Equal Pay for Equal Work Act, based on various factors including but not limited to geographic location, experience, performance, and other considerations permitted by applicable law. Salary Guidelines: (Minimum - Maximum) $25.00 - $34.50 What we offer: At H&P, our commitment to our people is at the forefront, and that includes benefits that provide employees a sense of health and financial security. We know that life continues outside of employment and actively caring of our people is our priority. Comprehensive medical, dental, vision, and life insurance Flexible Spending or Health Savings Accounts 401k match Paid Leave Plans Parental & Adoption Benefits Disability Coverage Employee Assistance Program Educational Assistance Learning & Development Opportunities Flex-scheduling available for qualifying positions to achieve work-life integration H&P is committed to employing a diverse workforce. Qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. For more information on benefits and job opportunities, please visit Careers | Helmerich & Payne, Inc. Thank you for your interest in joining our team! Thank you for your interest in joining our team!

SUMMARY The Mechanic will be responsible for repairing and maintaining a variety of engines and diesel engines used to power our fleet trucks, tractor trailers and tankers using hand tools, and machine tools. Our fleet is multi-brand and multi-year. DOT compliance knowledge is a must in keeping our fleet safely on the road. Work is performed in both office and shop settings so exposure to dust, dirt and common mechanical and shop chemicals can be expected; must be able to sit, stand, reach, bend, twist and lift and move up to 50 pounds regularly. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs annual inspections on trucks, trailers, and pickups Performs repairs and assigned preventive maintenance services Performs inspections, diagnostics and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment Perform all DOT inspections to ensure fleet is in safe and road worthy condition Utilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs Estimates time on vehicle repairs and completes requisitions for new parts Performs all work within Standard Repair Times Performs service calls for emergency breakdowns Conducts safety checks on vehicles, removing unsafe vehicles from service Completes required paperwork, documenting parts usage, and accounting for repair times, DOT reporting, etc. Reviews, completes repairs identified on Driver Vehicle Inspection Reports Maintains a clean, safe work area, and performs all work in accordance with established safety procedures Other duties and tasks as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE Minimum two years of relevant work experience Clean driving record, no DUIs in the last 5 years Must be at least 18 years of age Ability to perform physical requirements of the position with or without reasonable accommodations Must be self-motivated and customer service-oriented while being an effective team player Ability to be flexible and shift priorities in a constantly changing, fast-paced work environment COMPUTER Basic knowledge of MS Office preferred PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment screenings This description reflects management's assignment of essential functions, it does not exclude or restrict the tasks Job Description Page 2 of 2 MAN996 Mechanic that may be assigned or re-assigned. This job description is subject to change at any time.

SUMMARY The primary duty of the Rig Operator is to work the controls and equipment on a rig. The Rig Operator supervises crewmembers while rig operations are in process, maintains productivity standards, and works closely with customer representatives to provide safe, reliable, and quality service. ESSENTIAL DUTIES AND RESPONSIBILITIES Promote RES concept of Stop Work Accountability Promote RES safety policies and procedures Perform Meet and Greet at location sites Be aware of Simultaneous Operations and able to coordinate vendor and contractor groups on location as needed Operate the rig safely during rig up/down and pulling operations Operate the crown and ground saver Check brake systems and confirm functionality Pull and lay down rods, tubing, casing, and other equipment as needed Understands job steps and arranges rods and tubing in derrick correctly Understand the rig's hydraulic, pneumatic and electrical systems Perform all required equipment inspections-workover rig, fall arrest system, derrick, hoisting and mud pump Able to instruct floor and derrick hands in use of all safety equipment Able to instruct the floor and derrick hand in use of all rig and pumping equipment Operate the power swivel Perform Blowout Preventer (BOP) inspection, testing and installation as needed Assist HSE, DOT, and all other applicable departments with document completion, collection, and management Complete field tickets in a timely manner and turn in to appropriate department for processing Troubleshoot maintenance issues; to include performing worn equipment recognition checks and turning in maintenance requests for repair or replacement of equipment as needed Accurately perform torque calculations and specs Perform JSA/DWP and tail gate meetings as scheduled Perform pipe tallying, rigging up and down, nipple up and down of BOP units, and pipe handling Responsible for keeping work site, equipment, and tools clean and in good working order Perform day to day lubrication and minor adjustments of equipment Perform use of Hazard ID programs and means of documenting hazards Perform daily inspection and maintenance of equipment Perform and oversee energy isolation procedures Train and mentors crew members on day to day operations Responsible to stop work if conditions are unsafe and report concerns immediately Report all incidents as per the standard operating procedures Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS AND EXPERIENCE High school diploma or equivalent, preferred 5 years' of experience working on a well servicing rig preferred 2 years' of experience as a relief operator preferred Must be able to successfully perform the duties of a Floor Hand III and derrick hand Must be familiar with pump and tank operations Must have a valid state issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Competent communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule COMPUTER Basic knowledge of MS Office preferred Able to use the company's HSE Management Platforms PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment drug screening, Urine, Alcohol, Hair Follicle and Physical, if applicable. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

SUMMARY The primary duty of the Rig Operator is to work the controls and equipment on a rig. The Rig Operator supervises crewmembers while rig operations are in process, maintains productivity standards, and works closely with customer representatives to provide safe, reliable, and quality service. ESSENTIAL DUTIES AND RESPONSIBILITIES Promote RES concept of Stop Work Accountability Promote RES safety policies and procedures Perform Meet and Greet at location sites Be aware of Simultaneous Operations and able to coordinate vendor and contractor groups on location as needed Operate the rig safely during rig up/down and pulling operations Operate the crown and ground saver Check brake systems and confirm functionality Pull and lay down rods, tubing, casing, and other equipment as needed Understands job steps and arranges rods and tubing in derrick correctly Understand the rig's hydraulic, pneumatic and electrical systems Perform all required equipment inspections-workover rig, fall arrest system, derrick, hoisting, and mud pump Able to instruct floor and derrick hands in use of all safety equipment Able to instruct the floor and derrick hand in use of all rig and pumping equipment Operate the power swivel Perform Blowout Preventer (BOP) inspection, testing, and installation as needed Assist HSE, DOT, and all other applicable departments with document completion, collection, and management Complete field tickets in a timely manner and turn in to appropriate department for processing Troubleshoot maintenance issues; to include performing worn equipment recognition checks and turning in maintenance requests for repair or replacement of equipment as needed Accurately perform torque calculations and specs Perform JSA/DWP and tailgate meetings as scheduled Perform pipe tallying, rigging up and down, nipple up and down of BOP units, and pipe handling Responsible for keeping worksite, equipment, and tools clean and in good working order Perform day to day lubrication and minor adjustments of equipment Perform use of Hazard ID programs and means of documenting hazards Perform daily inspection and maintenance of equipment Perform and oversee energy isolation procedures Train and mentors crew members on day to day operations Responsible to stop work if conditions are unsafe and report concerns immediately Report all incidents as per the standard operating procedures Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS, AND EXPERIENCE High school diploma or equivalent, preferred 5 years of experience working on a well servicing rig preferred 2 years of experience as a relief operator preferred Must be able to successfully perform the duties of a Floor Hand III and derrick Hand Must be familiar with pump and tank operations Must have a valid state-issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Competent communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule COMPUTER Basic knowledge of MS Office preferred Able to use the company's HSE Management Platforms PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment screening. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)

This job has preference to qualified local job seekers within 60 miles of Axis Williston, ND facility. The Rig Operator, reporting to the assigned Tool Pusher/Field Supervisor, leads a 4–5-person workover rig crew, and is responsible for performing and safely operating well workover components and services. The primary responsibilities include and is not limited to preparation of crew members, inspection, maintenance, and operations of assigned workover rig, in accordance with company procedures and customer requirements. Additional functions may be specified by the assigned Tool Pusher or other designated operations management. All duties are expected to be performed safely and effectively to maximize the safety of the entire crew while meeting customer expectations and being a solution to their projects by Axis operating safety and performance standards. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Confirms all scheduled shift times that the full crew are prepared for work at the assigned rig. Supports the workover crew and is responsible for performing operating functions, including driving the workover rig as necessary to the job site, with direction from the field supervisor/Tool Pusher, and/or the customer company representative. Inspects the setting up, taking down and transportation of the assigned workover rig. Conducts routine inspection and troubleshooting on all service equipment. Monitors, tests, installs, lifts, and removes equipment using proper job and safety procedures. May train and direct the crew on safety and job procedures. Handles job safety analysis and daily maintenance program for the rig, ensuring the crew understands the programs and procedures. May be requested to work outside of the assigned work schedule to meet customer needs. Depending on project and rig assignment, may be required to perform other functional duties as assigned by Tool Pusher/Field Supervisor Minimum Qualifications (Knowledge, Skills, and Abilities) High school diploma, GED, or the equivalent. Must have valid state issued driver license with acceptable motor vehicle records (MVR); Class A or B CDL a plus/preferred. Required five (5) years of workover rig experience; production experience a plus; minimum two (2) years Rig Operator experience required and at least two (2) years (prefer 3 years) operational and safety experience as a Derrick Hand and Floor Hand required. Working knowledge of basic service mechanical functions. Ability to lift heavy equipment up to 75 lbs. Ability to access the work environment by use of a ladder at heights of 50 ft. or more. Long periods of standing, squatting, kneeling, reaching or similar activities may be necessary. Able to perform duties with protective equipment, H2S respirator where required; potential hazards include working near or with heavy tools and moving machinery. Must be able to travel as job requires. Work may be performed in all weather conditions. Ability to effectively communicate, both verbally and written; English preferred. Ability to interact with others in a team environment and work in a fast-paced environment and handle multiple tasks at once. Basic problem solving and organizational skills. Excellent customer service skills, to provide world class value to Axis customers. Have dependable form of communication – cell phone preferred. Dependable transportation. Ability for qualified clearance on background checks, pre-employment drug and alcohol and job-relevant screens.

SUMMARY The primary duty of the Rig Operator is to work the controls and equipment on a rig. The Rig Operator supervises crewmembers while rig operations are in process, maintains productivity standards, and works closely with customer representatives to provide safe, reliable, and quality service. ESSENTIAL DUTIES AND RESPONSIBILITIES Promote RES concept of Stop Work Accountability Promote RES safety policies and procedures Perform Meet and Greet at location sites Be aware of Simultaneous Operations and able to coordinate vendor and contractor groups on location as needed Operate the rig safely during rig up/down and pulling operations Operate the crown and ground saver Check brake systems and confirm functionality Pull and lay down rods, tubing, casing, and other equipment as needed Understands job steps and arranges rods and tubing in derrick correctly Understand the rig's hydraulic, pneumatic and electrical systems Perform all required equipment inspections-workover rig, fall arrest system, derrick, hoisting, and mud pump Able to instruct floor and derrick hands in use of all safety equipment Able to instruct the floor and derrick hand in use of all rig and pumping equipment Operate the power swivel Perform Blowout Preventer (BOP) inspection, testing, and installation as needed Assist HSE, DOT, and all other applicable departments with document completion, collection, and management Complete field tickets in a timely manner and turn in to appropriate department for processing Troubleshoot maintenance issues; to include performing worn equipment recognition checks and turning in maintenance requests for repair or replacement of equipment as needed Accurately perform torque calculations and specs Perform JSA/DWP and tailgate meetings as scheduled Perform pipe tallying, rigging up and down, nipple up and down of BOP units, and pipe handling Responsible for keeping worksite, equipment, and tools clean and in good working order Perform day to day lubrication and minor adjustments of equipment Perform use of Hazard ID programs and means of documenting hazards Perform daily inspection and maintenance of equipment Perform and oversee energy isolation procedures Train and mentors crew members on day to day operations Responsible to stop work if conditions are unsafe and report concerns immediately Report all incidents as per the standard operating procedures Other duties as assigned REQUIRED EDUCATION, QUALIFICATIONS, AND EXPERIENCE High school diploma or equivalent, preferred 5 years of experience working on a well servicing rig preferred 2 years of experience as a relief operator preferred Must be able to successfully perform the duties of a Floor Hand III and derrick hand Must be familiar with pump and tank operations Must have a valid state-issued driver's license, CDL, or the ability to obtain one Ability to perform manual labor required to operate well servicing equipment Competent communication, people, and leadership skills Must be able to multi-task in a fast-paced environment Ability to work a flexible schedule COMPUTER Basic knowledge of MS Office preferred Able to use the company's HSE Management Platforms PRE-EMPLOYMENT REQUIREMENTS Must complete and pass all required pre-employment screening. ABOUT THE COMPANY Ranger Energy Services is an oil & gas completion and production solutions company with a foundation built on well servicing, wireline, and natural gas processing. Ranger Energy is committed to providing employees with a benefits program that is both comprehensive and competitive. The programs are designed to invest in you and the things you care about - your health, your family, and your future. Come join our team of highly skilled, motivated employees, working on state-of-the-art equipment with outstanding compensation and additional benefits, including: Medical/Dental/Vision Flexible Spending Account/Health Savings Account Life Insurance Short- and Long-Term Disability Insurance Employee Assistance Program 401(k) Retirement Plan with Employer Match PTO (depending on eligibility)