Auto-apply to these jobs in Louisiana

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.   We are seeking a Mechanical Engineer, Rotating Equipment to join our site engineering team at our Calcasieu Pass 2 LNG (CP2) facility located in Cameron, Louisiana.   The successful candidate shall possess understanding of drivers such as turbines (gas & steam) and motors, and driven equipment such as generators, compressors and pumps. The incumbent shall also be familiar with associated supporting components/systems such as, couplings, bearings, lubrication and sealing systems (dry gas seals and mechanical seals). Working knowledge in compressor performance and vibration analysis is key in successful performance of this job.   Additionally, this individual shall provide, as a minimum, intermediate level Reliability Engineering support to the Operations team with focus in the following areas:   Root Cause Failure Analysis (RCFA): With expertise in relevant techniques to adequately lead RCFA exercises for failures relating to plant equipment and/or processes. Reliability Centered Maintenance (RCM): With adequate knowledge in relevant techniques to drive fine-tuning & improvements in existing Maintenance practices to achieve a cost-effective, yet safe robust Maintenance strategy.   Responsibilities:   Rotating equipment MOC/HAZOP signoff Site rotating equipment technical authority VG engineering sign off on rotating equipment inspection / readiness Provides input to weekly site engineering report Witness major activities (motor solo runs, N2 runs, SATs etc) Qualifications:   Education and Certifications:   Minimum Bachelor’s degree in Engineering or other relevant technical discipline is required Mechanical Engineering focus is preferred. A Professional Engineering License is preferred.   Experience:     A minimum of Five (5) years’ experience working in an engineering capacity, with Rotating and Mechanical equipment in an industrial setting in engineering or operations Oil and Gas experience is required, with preference in LNG applications, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable.   Extensive knowledge of gas turbines (Frames & Aero-derivatives) and compressors (including compressor performance) is required Additional Skills:   Knowledge of CMMS Systems RCFA tools for conducting failure analysis   Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. #LI-Onsite         #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking qualified applicants for the position of Maintenance Technician, Mechanical. Location: Plaquemines Parish/Belle Chasse - Point of  Reference: 19000 LA-23, Pointe Celeste, 70083 General Description: The Maintenance Technician, Mechanical (Process) reports to the Maintenance Mechanical Supervisor (Process) and performs the safe, efficient, and effective execution of all mechanical preventive and corrective maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility, specifically, at the Liquefaction, Storage and Loading facilities. The Maintenance Technician, Mechanical (Process) is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments. Responsibilities: Executes preventive and corrective maintenance mechanical work according to PLNG HSSE process, procedures, standards, and regulations. Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures. Performs problem solving activities to ensure maintenance and reliability issues corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Mechanical systems. Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution. Works with maintenance and engineering counterparts to ensure the safe completion of scheduled maintenance work. Responsible for daily work progress reports and updates, adhering to maintenance work execution processes and procedures, among other activities. Manage personal timecard according to PLNG Policies and Procedures (vacation, time-off, sick leave, training, “on-call” etc.) Supervises contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams. Provide mentoring and coaching to others and holds personal accountability for performance and behavior. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility. Participate in PLNG Ready for Operations (RFO) maintenance projects to develop required maintenance systems, process, and procedures before commercial operations. Supports Mechanical equipment factory acceptance test (FAT) and site acceptance tests (SAT) as required. Participate in pre-commissioning, commissioning, startup, and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D models and P&ID reviews.  Qualifications: Education and Certifications: Minimum of a high school diploma or GED; Technical degree in Mechanical, or applicable nationally recognized standard Certification. (i.e., NCCER) preferred Experience: Minimum Five (5) years of maintenance mechanical technician work experience in Oil & Gas, LNG, or petrochemical facilities. Knowledge of mechanical industrial standards, code regulations (i.e., API, ASME – Process, NBIC pressure devices relief testing among others). Strong knowledge of preventive and corrective maintenance of mechanical static and rotating equipment. Applied knowledge of maintenance and inspection of mechanical equipment such as - but not limited to, Loading arms, Gangways, Berth systems, cryogenic pumps and systems (Cold Box, Refrigerant Storage, etc.), reciprocated, screw and centrifugal compressors, Diesel engines, Air Cooled Heat Exchangers, Flare systems, Catalysts loading/unloading, etc. Experience working scaffolding, painting, insulating, heavy equipment operation-rigging/lifting crafts, welding, fabrication, machining, etc. Familiar with CMMS systems work management process (Work order process). SAP experience is preferred. Experience supporting small/medium scale mechanical projects. Skills: Strong leadership and organizational skills are required. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries, and governmental agencies Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines. Credibility to set high standards and promote continuous improvements initiatives. Able to work with a culturally diverse group of technical individuals. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers who are all responsible for ensuring good operations. Exceptional problem solving and analytical skills. Able to operate Industrial Mobile Equipment (i.e., Forklift truck, Aerial Lift, etc...) Able to work at elevated height(s) over. Able to work over water and operate watercraft. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint. Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.               #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. Contract position in Cameron, LA Duties include but are not limited to: Visits construction sites and inspects each stage of construction up to completion. Interpret plans, specifications, and codes and verifies contract work is performed in accordance with them. Assist in obtaining approved designs and permits from utility companies for services to construction sites. Monitor construction sites for safety violations. Prepares Non-Conformance Reports when work is not performed to the approved standards. Maintains daily activity logs and reports. Review or prepare interim progress reports for contractor payments. Monitor contractor-testing activities. Prepare reports on labor, material, and equipment on site. Determine construction conforms to plans and specifications; if not issue Non-Conformance Reports for corrective action. Assist in maintaining, supporting, and promoting a safe work environment while complying with s safety rules, policies, and procedures. Coordinates preparation of inspection cost estimates and maintenance records. Arranges, coordinates and oversees technical inspections such as electrical, mechanical, landscaping, soil testing, concrete, and asphalt mixes, and reinforcing steel for conformance to specification requirements. May allocate inspection resources and supervise inspectors. Qualifications: Approximately five (5) years of experience or greater Supervisor Building Inspector of large commercial or industrial construction projects, heavy construction projects, transportation, or transit construction projects for the civil disciplines Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.       #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. The role provides a comprehensive project controls function for the assigned areas of the project, may include cost estimating, project planning, progress measurement and reporting, budget and cost control, resource planning, risk management, cash and accrual management, invoice attesting and processing. The role will oversee, facilitate, and ensure performance of responsibilities in accordance with Company and Project Guidelines and Procedures. Accountabilities: Demonstrate visible leadership and commitment to HSSE performance. Manage and develop an organization that provides fit-for-purpose and effective project controls support to the project. Maintain timely awareness of project cost and schedule performance against baseline; analyze potential changes; recommend corrective actions. Support the Change Management process and ensure impacts are incorporated into cost and schedule forecasts along with contingency positions. Agree project arrangements for managing expenditure authorizations with cross-functional groups, i.e., Finance, Accounting, Management, etc. Ensure suitable project controls tools utilized and integrated for both Company and the Contractor systems. Monitor and review the project controls element of contractor performance throughout the contract life cycle; recommend corrective action where necessary. Control and coordinate communication to and from Company and external groups Facilitate sharing of data and analysis between Company and external groups as necessary Responsibilities: Task team and hold action oversight Prepare regular and timely progress reports and may entail aggregating contractor’s cost reports and schedules into an overall integrated cost report and overall project schedule, detailing progress against plans and budgets, for circulation to senior management and other stakeholders. Populate and update Company’s project monthly report and submit other progress information as requested for management reviews. Manage the attesting and approval for payment of all invoices submitted for payment. Prepare project controls elements of bid specifications and review tender submissions prior to the contract award. Review contractor cost and schedule reports and recommend corrective action where necessary. Ensure the capture of project close-out information to improve cost estimating and schedule projections for future opportunities. Qualifications: A Bachelor’s degree in Engineering or Business or a related field. Minimum 15-20 years project controls experience with 7+ years in a lead role. Experience leading the project controls function for a major project. Demonstrated ability to understand a demanding, technical, and complicated project execution program; and the ability to communicate progress and issues to a technical and management-level audience. Effective oral and written communication skills with an ability to communicate complex issues. Working knowledge of Microsoft Office, EcoSys, and Primavera P6 along with other Project Controls tools Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. #LI-Onsite         #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. The Senior Cost Analyst will provide oversight to project activities and is responsible for achieving safe, cost effective, timely and contractually compliant project results.  This new position will be based at our CP2 site in Cameron, LA.  The Cost Analyst will report to the Senior Vice President of Project Controls and site Project Controls Manager. Key Responsibilities and Essential Duties: Lead a Safe work culture. Provide analysis to project teams by providing communication, coordination and follow-up to meet project goals and objectives. Oversee effective project reporting, monitoring and evaluation including regular project progress and performance reporting. Engage with project management in order to drive project success. Oversight of project budgets Understand industry standards Support the mitigation of project challenges through creative and innovating problem solving. Contribute to effective and efficient project controls oversight of projects Report on project status, performance, constraints and issues to Senior and Executive Management. Other responsibilities as assigned. Job Qualifications 5+ years of relevant cost experience in major Oil & Gas Engineering and Construction projects. Experience with LNG Liqeufaction or Combined Cycle Power Generation projects preferred. Ability to perform multiple tasks and work within project deadlines, and adjust as priority changes occur. Exhibit excellent written and oral communication skills. Have advanced computer experience and knowledge of Microsoft Office suite. Excellent attention to detail and ability to efficiently summarize and prioritize information. Ability to work nights and weekends as required.   Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. #LI-Onsite         #LI-Onsite  

Procon Consulting, a fast-growing professional services firm with a national client base and expertise in construction management (CM), project controls, construction-related technology, space planning, and facilities management, is seeking a Construction Project Manager for an opportunity in Alexandria, LA. The candidate will have responsibilities that include but are not limited to construction management, quality assurance, project controls, inspections, documentation and administration, stakeholder management and coordination. This role requires 10+ years of experience in construction management on projects for interior office renovations. Responsibilities and Duties Provide onsite construction management duties during construction, fit-out, commissioning and occupancy phases. Strong background with administration and communication during project delivery, including creating and updating spreadsheets, navigating owner provided software to align with the proper project processes, and maintaining compliant electronic documentation during the project. Provide technical support daily to all customers, manage electronic documents, serve as the liaison for stakeholders and customer groups, provide expertise, monitor security related issues, and maintain a coordinating relationship with the government agency, its clients, and external partners to include the architect-engineers, construction contractors, and other contractors supporting the government. Provide support in project planning, procurement, design reviews, management direction, project completion, client satisfaction, and financial outcome of assigned construction projects. Generate well organized professional deliverables, including daily field reports, monthly reports, meeting minutes, and monthly master schedule updates. Provide support in creating estimates for change orders, reviewing contractor change orders, and providing comparisons for owner supported negotiations. Review schedule and align project work plan and deadlines with requirements. Inspect and monitor on-site processes, procedures, and systems for compliance with construction drawings, security requirements, and code compliance. Lead and manage the construction quality assurance process. Coordinate and monitor the completion of activities in all phases of the project life cycle. Monitor and oversee the project to include but not limited to design reviews, risk management, security and safety compliance, quality assurance, etc. Conduct comprehensive reviews of construction submittals and construction contract documents. Provide project administration and contract administration duties, including monitoring of progress, follow up, and project documentation. Assist the Owner with technical reviews, execution, and administration. Assists with the transition of projects to those customers responsible for ongoing maintenance. Qualifications and Skills BA or BS degree in construction management, architecture, engineering, or a related field is required. 10+ years of experience in construction management on projects for new construction, mechanical systems, renovations, upgrades or new fit-outs. Excellent communication skills with field and office personnel. Self-starter, looking to grow, and seeking support and help from others. Excels in administrative work for project processes and documentation and understands the importance thereof. Experience in the use of industry project management software such as Microsoft Project, Primavera P6, AutoCADD, Revit, Procore, Kahua, etc. is preferred Experience with coordinating with project stakeholders, contractors, architects and engineers during all construction project phases. Experience with reviewing design document submittals, reviewing cost and schedule estimates, collecting, preparing, and reporting programmatic information. Experience with estimating and cost verification reviews. Fluent in project management principles and how to implement project management principles. Ability to analyze all relevant project-related information and communicate project status and issues effectively in writing and verbally. Ability to read and interpret drawings and specifications, interpret contract terms and conditions, working knowledge of CPM scheduling, communication skills, intermediate computer skills and leadership skills Preferred Qualifications: Experience in the role of construction project manager in both federal and private sector commercial construction projects is highly preferred but not required. Experience in the role of owner's representative on commercial construction projects is highly preferred but not required. Active PMP and/or CCM credential, and OSHA-30 and CQM certifications Salary commensurate with experience. Procon offers competitive salaries and a comprehensive benefits package, including full medical/dental/vision insurance and 401(K) plan with employer match. Procon is committed to providing a workplace free from discrimination or harassment. As a critical part of our culture of respect, we strictly prohibit any discrimination or harassment based on gender, age, race, color, religion, sexual orientation, gender identity, mental or physical disability, ancestry, pregnancy, national origin, and any other status protected by law. We are an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law. http://www.proconconsulting.com/

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.  We are seeking an experienced Subcontracts Administrator who is familiar with engineering, procurement and construction contracts and large infrastructure and/or energy projects, to administer and enforce construction contracts associated with the Company’s LNG projects.  Subcontract Administrator will support the administration of all phases of the project subcontracts, including preparation of subcontracts plan, bidders’ pre-qualification, subcontracts formation, risk assessment, execution, change management, reporting and formal close-out.   This individual will support the Subcontracts Manger and participate in a multi-disciplinary team that provides contracts oversight, implementation, and support and, as necessary, assist members of other departments in relation to such matters. The Subcontract Administrator will report to the Manager of Subcontracts and support the Project Team as necessary.   This position will be located in Cameron, LA. Key Responsibilities: Working as part of the Project Team in developing and forming subcontracts. Administering all phases of construction subcontracts, including pre-qualification, formation, execution and close-out. Developing and maintaining project subcontract plans. Sourcing potential subcontractors and performing bidders’ qualification in collaboration with HSE and QA/QC teams. Ensuring proper technical inputs needed for the award of subcontracts are timely received from proposals and project technical teams, avoiding to the extent possible any post-award changes. Developing and issuing RFQs, adding value to the scope of work, technical documents, and project schedule. Soliciting and ensuring proper review of RFQ package documents for completeness prior to issue. Receiving and analyzing proposals, support the Subcontract Manager negotiating the terms of the subcontracts with the support of the project and legal teams. Obtaining NDAs from bidders/subcontractors, as required. Conducting and documenting subcontracts pre-award and project kick-off meetings. Preparing, with the collaboration of the Project Team, the Subcontract Bid Assessment & Recommendation for award to be reviewed and approved by management. Support Subcontract execution following Company’sGuidelines and Procedures. Tracking and auditing subcontract document list working in conjunction with the Document Control Team. Reviewing and analyzingquantity assessment provided by Project Controls for invoice validation and subcontract productivity. Ensuring all required subcontractor insurance is in place prior to the performance of any work. Attending Site construction meetings, as required. Support the Overall Change Order management process., by workingclosely with the relevant Project Stakeholders to finalize change order documentation. Monitoring and reviewing invoices from subcontractors. Obtaining Lien releases and completion certificates from subcontractors.   Highest Level of Education Required for this Position: Bachelor’s degree in Engineering, Law, Business or related field is preferred. Job Qualifications: Minimum 4 years of professional experience with contract / subcontracts. Minimum 3 years of professional experience in engineering / construction subcontracting activities for the oil and gas industry. Willingness to travel Willingness to work on Project Site, in Louisiana Knowledge of contract agreements, legal requirements involved in contracts, compensation methods, invoicing and change order processes required. Able to effectively communicate across various disciplines and with contract counterparties.  Excellent analytical and problem-solving skills, with an ability to spot issues and risks and escalate when appropriate. Excellent writing skills, including drafting of simple legal documents. Ability to prioritize and meet critical deadlines. Attention to detail and ability to manage commercially sensitive and confidential information. Ability to work independently as well as with team members and take direction in a fast-paced and dynamic environment. Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.         #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking qualified applicants for the position of Maintenance Analyzer Technician. General Description: The Maintenance Technician, Analyzer reports to the Maintenance Controls Supervisor and performs the safe, efficient and effective execution of all Analyzer maintenance work at Venture Global Calcasieu Pass Liquefied Natural Gas (CPLNG) facility. The Maintenance Analyzer Technician is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments. Responsibilities: Executes preventive and corrective maintenance work in a wide variety of Analyzers according to CPLNG HSSE process, procedures, standards and regulations. Adherence to VGIMS (Venture Global Integrity Management System), CPLNG Maintenance Manual and Work Management process and procedures. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures. Performs problem solving activities in order to ensure maintenance and reliability corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Analyzer Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution. Works along with Operations, Maintenance and Engineering counterparts to ensure the safe completion of maintenance work. Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures. Manage personal time card according to CPLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.) Oversees contractor work execution, safe work completion, and performance according to CPLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams. Monitors standards and carrier bottles availability. Work with Planning team members to ensure replacement standards are ordered and on site before the expiration date, as required. Support analyzer regulatory and fiscal testing procedures such as audits on CEMS. Maintain records of all maintenance actions taken (Preventive Maintenance, non-routine maintenance and repair activities on all critical Analyzers). This includes; CEMS Data Base, Non CEMS Data Base, LEL/Gas Detector Data Base, SQC Data Base, and ISO records. Work with Controls team to maintain and troubleshoot GC Analyzer Systems (such as AMADAS) communication network. Provide mentoring and coaching to others and holds personal accountability for performance and behavior. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility. Participate in CPLNG Ready for Operations (RFO) maintenance projects in order to develop required maintenance systems, process and procedures before commercial operations. SupportsAnalyzerequipment factory acceptance test (FAT) and site acceptance tests (SAT) as required. Supports Instrumentation and Controls team members as required. Participate in pre-commissioning, commissioning, startup and operation of the CPLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D model and P&ID reviews. Qualifications: Education and Certifications Minimum of a high school diploma or GED; Technical degree in Instrumentation, or applicable nationally recognized standard Certification. (i.e. NCCER / NICET) Experience: Minimum Five (5) years of maintenance Analyzer work experience in Oil & Gas, LNG or petrochemical facilities. Strong knowledge of electrical industrial standards and regulations (i.e. ISA, NFPA 70E, FERC, GPA 2177, 2198, 2261-13,14,19) Strong knowledge of preventive and corrective maintenance of Analyzers Instrumented equipment. Strong applied knowledge of maintenance and inspection of critical analyzers, such as, but not limited to: ph. meters, O2 meters, gas chromatography, infrared and ultraviolet detection technology, conductivity analyzers, online spectrometers, emissions monitoring, oxygen measurement, and regulatory, fiscal, environmentally required analyzers. Experience/Knowledge GC Analyzers (i.e. AMADAS) systems. Familiar with CMMS systems work management process (Work order process). SAP experience is preferred. Work experience in small/medium scale Analyzer instrumented projects. Skills: Strong leadership and organizational skills are required. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines. Credibility to set high standards and promote continuous improvements initiatives. Able to work with a culturally diverse group of technical individuals. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers whom are all responsible for ensuring good operations. Exceptional problem solving and analytical skills. Able to operate Industrial Mobile Equipment (i.e. Forklift truck, Aerial Lift, etc...) Able to work at elevated height(s) over. Able to work over water and operate watercraft. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint. Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status. Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.         #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking qualified applicants for the position of Maintenance Technician – Fire & Gas. General Description: The Maintenance Fire & Gas Technician reports to the Maintenance Instrumentation Supervisor and performs the safe, efficient and effective execution of all Fire & Gas maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Instrumentation Technician is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments. Responsibilities: Executes preventive and corrective maintenance (Fire &Gas) instrumentation work according to PLNG HSSE process, procedures, standards and regulations. Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures. Performs problem solving activities in order to ensure maintenance and reliability corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Fire & Gas systems. Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution. Works along with Operations, Maintenance and Engineering counterparts to ensure the safe completion of maintenance work. Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures. Manage personal time card according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.) Oversees contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliance issues to direct Supervisor and Planning/Contract teams. Provide mentoring and coaching to others and holds personal accountability for performance and behavior. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility. Participate in PLNG Ready for Operations (RFO) maintenance projects in order to develop required maintenance systems, process and procedures before commercial operations. Supports Instrument equipment factory acceptance test (FAT) and site acceptance tests (SAT) as required. Participate in pre-commissioning, commissioning, startup and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D model and P&ID reviews. Qualifications: Education and Certifications Minimum of a high school diploma or GED; Technical degree in Instrumentation, or applicable nationally recognized standard Certification. (i.e. NCCER / NICET) Experience: Minimum Five (5) years of maintenance Instrumentation work experience in Oil & Gas, LNG or petrochemical facilities. Strong knowledge of electrical industrial standards and regulations (i.e. ISA, NFPA 70E, FERC, etc.) Strong knowledge of preventive and corrective maintenance of Instrumentation equipment. Applied knowledge of maintenance and inspection of Instrumentation equipment such as - but not limited to, Fire & Gas equal to open path point detection and fire detection. Familiar with CMMS systems work management process (Work order process). SAP experience is preferred. Experienced in mentoring  and training  subordinates in these systems. Skills: Strong leadership and organizational skills are required. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines. Credibility to set high standards and promote continuous improvements initiatives. Able to work with a culturally diverse group of technical individuals. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers whom are all responsible for ensuring good operations. Exceptional problem solving and analytical skills. Able to operate Industrial Mobile Equipment (i.e. Forklift truck, Aerial Lift, etc...) Able to work at elevated height(s) over. Able to work over water and operate watercraft. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint. Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.   Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.         #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. In addition to liquefaction, LNG storage and loading and power generation facilities; the plant includes inlet gas compression, feed gas pre-treatment and utility systems including; hot oil, nitrogen, plant and instrument air, flares, fuel gas. We are seeking a senior commissioning and start-up professional to join us as a Commissioning Start Up- Power Island Systems. The Venture Global Commissioning team is responsible to ensure the safe and efficient pre-commissioning, commissioning, start-up and operation of the facility to achieve the plant’s production and performance objectives. Key Responsibilities/Accountabilities: Oversight of Contractor electrical commissioning activities. Participate as electrical in Pre-Start-Up Safety Reviews (PSSR). Represent electrical commissioning in project punch listing activities. Support construction process assessments during system pre-Mechanical Complete (MC) walk-downs and identify exceptions, deficiencies, and assign priority levels to punch list items Implements procedures to deliver the overall safety of the Plant and its personnel. Implementation of SIMOPs. Support Electrical factory tests and inspections Assurance and audit of electrical test plans and commissioning procedures Actively lead site safety observation program, hold and/or attend Daily Safety Meetings Lead and require strict adherence to Lock Out / Tag Out Procedures (LOTO), work permits, and company policies Review and spot check Job Hazard Analysis (JHA) audits for department Review scope packages and validate necessary forms for completed turnover package Review work packages associated with electrical system testing and commissioning Review test procedures for component and system testing Lead electrical site functional tests and sign-off Perform project document reviews Support site Change Management for electrical discipline Support O&M management of electrical spare parts and consumables necessary for the proper operation of facility Responsible for identification and resolution of electrical equipment malfunctions and deficiencies. Resolution may include written report and correction plan. Checkout installed systems and equipment adhering to OEM requirements, system descriptions, and good industry standard practice Track progress of assigned systems and provide completions with timely reports on progress and activities Witness commissioning and testing of individual components, systems, and the station as a complete integrated unit to meet all contractual obligations Perform pre-startup and online testing of site electrical safety systems. Support site management of safety lifecycle documentation, and testing. Basic Qualifications: Associate’s Degree in electronics from a University or Technical School, and/or job related experience and minimum of 10 years field execution experience OR Minimum 10-15 years of experience in LNG/Gas Process/Refinery/Petrochemical Industries and Power Plant maintenance and operations Minimum 10 years of electrical experience in supervisor roles and/or specialization Minimum 5 years of experience as Electrical Lead on mid to large scale project Must have broad technical knowledge of the detail design engineering process and all types of Electrical instrumentations Smart Plant Instrumentation (SPI), MS Office Suite EPC experience Recent knowledge of engineering methods and possesses a technical knowledge of the detail design engineering process and electrical controls systems Must have knowledge of field-testing requirements and equipment to perform the testing Experienced with domestic and/or International electrical codes and standards. Including NEC, NFPA, NETA, and ANS Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.       #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking an Area Planning Manager to be based near Cameron, LA. General Description: The Area Planning Manager is responsible for overseeing the planning, scheduling & advanced work packaging processes and functions for an area on one of our major capital projects. This new position will be based at the project site near Cameron, LA and report to the Director, Planning & Scheduling. This position will collaborate with Venture Global project management and contractor personnel to develop and maintain project execution plans and schedules while also providing leadership and oversight of planning professionals assigned to the project. The primary focus of this position will be the safe and efficient work planning of civil and structural activities, pipe installation and testing, electrical and instrumentation installation, materials management, and commissioning & start-up activities in support of the overall project schedule. In addition, this position will implement and monitor robust planning & advanced work packaging processes and procedures that will be able to be replicated across all scopes of work.  The role will also require effective communication to Project and Executive Management for timely decision making and incorporation of stake holder input. The role will be based at our project site, with potential for travel to other project locations and contractor offices.  Responsibilities: Development and maintenance of planning & advanced work packaging processes and procedures. Development and quantification of construction and commissioning performance targets. Development and maintenance of internal company plans & schedules. Lead reviews and monitor adherence of Contractor execution plans & schedules, including resource requirements. Provide oversight and leadership to Contractor Planning teams. Set up and maintain reporting and dashboard templates for consistent communication. Present and effectively communicate plan & detailed execution information internally and externally. Develop and maintain graphical summary depictions of execution plan. Monitor contractor progress and productivity. Develop mitigations when interruptions to the plan arise.  Other responsibilities as assigned. Qualifications: Bachelor’s degree in Construction Management or Engineering discipline preferred. 7+ years of relevant construction planning and work packaging experience in major Oil & Gas engineering and construction projects Experience working on-site in industrial construction.  Proficient in NavisWorks or other 3D modeling and work packaging software. Strong Microsoft Excel, PowerPoint and Visio skills. Experience with Power BI, SQL or similar relational database management systems preferred. Excellent interpersonal and communications skills, with strong critical thinking and attention to detail. Strong work ethic with ability to effectively prioritize, meet deadlines, adapt to changing priorities and business needs, and succeed in a fast-paced environment. Excellent ability to efficiently summarize and prioritize information.   Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.       #LI-Onsite  

Overview ComplexCare Solutions (CCS) specializes in helping those in need by delivering high value in-home and virtual assessments for health plans nationwide. We pride ourselves on our member engagement aimed towards evaluating current health status, gaps in care, potential health risks and care management opportunities with a focus on driving better clinical outcomes. Our visits give Providers the opportunity to spend a full hour with these members which allows them to capture a comprehensive picture of that individual’s personal needs and what is required to keep them in the home and out of the hospital.   CCS is calling on Nurse Practitioners that are passionate about helping their local communities. We care dearly about those we serve and we need your help to make a difference in the lives of our members.   Responsibilities Knowledge of CMS Regulations and NCQA HEDIS Guidelines; Knowledge of Evidence-based Clinical Practice Standards:  American Diabetes Association (ADA), American College of Cardiology (ACC), American Heart Association (AHA)Familiarity with ICD-9, ICD-10 and CPT-4 coding practices; Complete comprehensive, accurate and thorough review of the assigned member population, including timely completion and submission of all required encounter documentation (paper or electronic); Ensure that all pertinent and active medical conditions are documented in the medical record in a manner compliant with CMS/DHHS, Inovalon policy, and client requirements; Support the physician/patient relationship and  ensure timely and adequate communication, documentation of assessment findings, recommendations, need for additional services, emergency services required if necessary  and need for follow up and timelines for follow up to primary care provider (PCP) and health plan as required; Make general recommendations to members intended to improve members' knowledge of their chronic condition(s), such as information concerning recommended testing; Address and close identified  gaps in care (disease-specific or preventive);  Recognize emergent or urgent situations requiring escalation and take appropriate action as specified in Inovalon policies, and as determined by reasonable professional judgment and ethical professional practice standards; and Perform, document and communicate results of Point of Care (POC) Testing. Maintain compliance with Inovalon’s policies, procedures and mission statement; Adhere to all confidentiality and HIPAA requirements as outlined within Inovalon’s Operating Policies and Procedures in all ways and at all times with respect to any aspect of the data handled or services rendered in the undertaking of the position; Fulfill those responsibilities and/or duties that may be reasonably provided by Inovalon for the purpose of achieving operational and financial success of the Company; Uphold responsibilities relative to the separation of duties for applicable processes and procedures within your job function; We reserve the right to change this job description from time to time as business needs dictate and will provide notice of such. Other duties as assigned Qualifications Active un-encumbered license to practice nursing; Nurse Practitioner Certification from either the ANCC or AANP; in Family, Adult, Gerontology or Emergency Medicine.  Board Certified through the AANP or ANCC Maintains current CPR certification Compliance, prior to hire, with recommended Healthcare Personnel Requirements for vaccinations and preventive testing: Hepatitis B, Influenza, MMR: Measles, Mumps and Rubella, Pertussis, Tetanus and diphtheria and acellular pertussis (Tdap), Varicella, Tuberculosis Home Health exp a plus  Must be able to effectively communicate with elderly and chronically ill patients and families; Understanding of Medicare, Medicaid and Health Plan benefit structures beneficial; Ability to multitask; Excellent customer service skills; Bi-lingual or multi-lingual a plus.           NPHJ21   Studies have shown that women and people of color are less likely to apply for jobs unless they believe they meet every one of the qualifications listed in a job description. If you don’t meet every qualification listed but are excited about our mission and the work described, we encourage you to apply regardless.  ComplexCare Solutions is most interested in finding the best candidate for the job and you may be just the right person for this or other roles. By embracing diversity, equity and inclusion we enhance our work environment and drive business success. ComplexCare Solutions strives to reflect the diversity of the communities where we operate and of our clients and everyone whom we serve. We endeavor to create a culture of inclusion in which our associates feel empowered to bring their full, authentic selves to work and pursue their professional goals in an equitable setting. We understand that by fostering this type of culture, and welcoming different perspectives, we generate innovation and growth. ComplexCare Solutions is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirement. The Company maintains a drug free work environment for all of its associates, which includes employees, contractors and vendors. It is unlawful for associates to manufacture, sell, distribute, dispense, possess or use any controlled substance or marijuana in the workplace and doing so will result in disciplinary action, up to and including termination of employment or the contracted relationship. To review the legal requirements, including all labor law posters, please visit this link

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking a Health and Safety Technician to join our team at our CP2 Facility.  This is a contract role that is based out of Cameron, LA.  This role shall report to the Venture Global LNG Health & Safety Manager. This position will be tasked with establishing and maintaining a “Boots on the ground” mentality to ensure that Health & Safety fundamentals are being utilized in the field. It will also serve as the immediate contact person in the field for all Health & Safety related questions, concerns, or activities. Essential Duties & Responsibilities: Oversee, implement, and manage Venture Global LNG’s safety policies and procedures while ensuring compliance with all applicable laws, standards, and requirements Continuously inspect, observe, and audit the application of work tasks against our defined company procedures, policies, and conditions of the working environments Establish and maintain themselves as the focal point in the field for all Health & Safety related questions, concerns, activities, and/or needs. Spend extended periods of time in the field walking throughout the assigned area(s), climbing stairs/ladders as needed to elevated work areas Ensure that hazard assessments and permitting requirements are being followed Engage workers in the field who are performing tasks unsafely and mentor them in the correct measures or practices to ensure that they are working with a safety-first mentality. Utilize a mentoring or educational approach when interacting with all personnel Assist in compliance reviews, general risk assessments, and other safety assessments to support the Health and Safety management of the facility Monitor all contractor activities to ensure safe work techniques and compliance with Venture Global LNG’s policies and procedures Possess the ability to multi-task effectively Enforce a zero-tolerance policy Control all unsafe conditions, hazards, and/or scenes when possible Conduct daily safety inspections, observations, and audits to ensure all unsafe acts and conditions are immediately addressed Perform facility audits, observations, surveys, and inspections to identify environmental, safety, and occupational hazards and weaknesses to promote effective practices and ensure compliance, and develop recommendations that provide solutions, remedies, or process improvement Inform HSSE leadership about the results of safety inspections, observations, and audits, as well as any observed deficiencies and means of mitigation Report all accidents, incidents, or events immediately to the Shift Supervision and Health and Safety Manager. Aid and assist in the accident and incident investigation process as needed Participate in incident investigations to guide the identification of root causes and effective corrective actions Assist and support Emergency Response processes for the site Inspect, control, and enforce effective and timely housekeeping standards Participate as a member of the Site Safety Committee Other duties as assigned Qualifications: H.S. Education or Equivalent required. Degree and/or certification in Health & Safety Sciences or related field strongly preferred Must have specific experience with Health & Safety in Commissioning and Startup activities Fully understand and have experience with the Permit to Work process and systems with the expectation to audit and advise using a mentoring approach to valid discrepancies and to provide safe and effective paths of resolution Strong leadership skills demonstrated by five (5) or more years in a Health & Safety Technician role or Specialist position having previous LNG, Petrochemical or Oil and Gas manufacturing industry a plus Understanding of OSHA general industry and/or construction standards Occupational Health and Safety knowledge, experience, or education related to job site hazard recognition safety inspection/audits for permit to work, hazardous energy isolation, hot-work (metal welding-grinding-thermal cutting), confined space entry, elevated work/fall protection, housekeeping, and crane hoisting and rigging Experience in Health and Safety policies, procedures, and standards in Industrial operations, natural gas operations, or liquefaction facilities, and/or an equivalent combination of education and experience Process Safety Management (PSM) experience is a plus Current CPR, First Aid, and AED certification are preferred. Preferred certifications include OSHA 500, OSHA 510, CSP, CHST, LSP, OHST, and ASP. Eligible to work in the US, pass a drug test and background check with a criminal history TWIC Required (Current owner or can obtain) Ability to communicate and interact effectively in verbal and written formats Must be able to work off shifts and overtime Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.         #LI-Onsite  

    Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost. We are seeking a Production Engineer to join our team at our Calcasieu Pass (CP) Facility LNG in Louisiana Facility. This role will initially report to the VP of Integrated Production Excellence This role will be responsible for optimizing the Availability and Performance of the Calcasieu Pass (CP) Facility LNG Liquefaction Trains and support the overall CP Facility Production System Optimization efforts. Responsibilities: Set CP Facility LNG Trains Production daily targets, define operating limits and engage with Operations, Maintenance and Engineering to develop the Production Plan for the day.  Build and maintain Real time, online, surveillance and monitoring models to optimize the Availability and Performance of the CP Facility LNG Liquefaction Trains  Perform Analysis to detect deviations from Live Operating Envelope Limits and identify the actions required to safely and reliably maximize LNG rundown. Identify short-, medium- and long-term Availability and Reliability improvement initiatives to maximize LNG rundown using insights from Real time System and Physics-based/data-driven models.  Identify Production risks that could impact Availability and Reliability and develop mitigation plans to address them Provide input to the weekly and monthly Production reviews and follow up on any actions required to improve the performance of the CP Facility LNG Trains Identify the CP Facility LNG Trains production loss events and engage with the relevant stakeholders (including but not limited to Engineering, Maintenance, Operations) to review, validate, report and manage production losses in a timely manner to maximize Availability and Reliability Lead or be part of EIRs (Engineering Investigation Requests) and MoCs (Management of Change) required to improve the CP Facility LNG Trains performance. Lead or be part of the CP Facility LNG Trains Production loss RCAs when required. Gather the required assumptions on LNG Trains performance and provide timely input to the Forecast and Annual Delivery Plan process. Support the Long-Term Service Agreement (LTSA) process and provide all the required input and analysis as required  Support the development of Integrated Production Excellence standards and procedures. Capture Lessons Learned from the CP Facility and provide input to other Venture Global LNG projects / sites as required Qualifications: Bachelor’s degree in Process, Production/Chemical Engineering  Minimum 3 years’ experience working as a Production Engineer with a demonstrated track record of Production performance improvement.  Oil and Gas experience is required, with strong preference in LNG, however, petrochemical, NGL, cryogenic natural gas processing, or other hydrocarbon processing experience may be acceptable. This position will be located in Cameron, LA with travel as needed to various sites.  Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. #LI-Onsite         #LI-Onsite  

We are seeking a skilled and motivated Heavy Equipment Field Technician to join our client's team. As a Field Technician, you will be responsible for diagnosing, repairing, and maintaining heavy equipment used in various industries. Your role will involve troubleshooting mechanical issues, performing inspections, and completing necessary repairs or part replacements. You will work directly at client sites, ensuring that the equipment is functioning optimally and minimizing downtime. Attention to detail, strong technical skills, and a commitment to safety are essential for success in this role. If you are a team player who enjoys working in a dynamic environment, we would love to hear from you! Consults with Service Supervisor to plan effective work and travel schedule, giving priority to customer need, considering location of machine and availability of parts. Diagnose malfunctions: repairs and/or replaces worn and defective parts; installs new assemblies, adjusts devices and controls - to correct malfunctions and to keep machines in operating condition. Provides tools and parts and arranges for facilities to perform repair work (usually on customer premises). Inspects, operates, and tests machines upon initial delivery, at specified inspection intervals and upon completion of any repair work to ensure proper functioning of equipment and its components. Reports to Service Supervisor such information as name of customer, description of machine, nature of malfunction, the time involved in working, driving, and waiting, mileage, etc., so that proper accounts can be charged, and proper billing can be made. Strives to increase technical skills through attendance at company-sponsored vocational schools, annual training meeting of departmental personnel and reading of technical literature. Promotes and enhances the company image by maintaining a neat, personal appearance and by keeping the service truck in a clean, polished, and orderly condition. Experienced or advanced servicemen are expected to serve as troubleshooters on recurring or unusual problems, conferring with Engineering, Manufacturing, and other service personnel to resolve. Experienced or advanced servicemen will be expected to train new servicemen or to supervise a team of servicemen in the assembling or servicing of large units or in a joint effort on large repair jobs. Requirements Experience working on heavy equipment or generators preferred Experience working with mechanical, electrical and hydraulic equipment 2+ years of field service experience preferred Ability to pass a background check, drug screen, MVR and physical Experience working with customers Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays)

Are you looking for a lucrative career where you can make a big difference in the health of others. Does a patient-focused, innovation-driven company that will inspire you and support your Pharmaceutical Sales Rep career sound like what you are looking for? If so, be empowered to take charge of your future and join us as a one of our Pharmaceutical Sales Rep team members. Each one of our professional Pharmaceutical Sales Representatives educates, promotes and sells pharmaceutical/healthcare products to Physicians and other specialized medical or healthcare providers. If you join our team as a Pharmaceutical Sales Representative you will manage your territory in order to maintain existing physician groups, clinics and proprietary primary care offices. As a member of the Pharmaceutical Sales Rep team, you will work closely with management and others to achieve sales goals and objectives. Our company provides quality consultative service, coordinate and integrate outside alliances, as well as other internal personnel and resources to fit customer needs. We have an unwavering dedication to put people first and we strive toward Better Health and a Brighter Future for people through leading innovation in medicine. Pharmaceutical sales is an excellent career choice for job-seekers because it offers excellent potential -- in career growth, income, and benefits. Pharmaceutical Sales Rep Major Duties: * Customer focus/Building Positive Relationships-Penetration of large accounts and identifying key decision makers. * Creative thought process in developing a customer base. * Create territory plan including goals and resource allocation (coverage, sampling, grant/education proposals, etc. for key customers). * Gain formulary acceptance/compliance with managed care accounts. * Scientific understanding of clinical papers. * Utilize consultative skills in assisting customer with their business * Market/sell Vertical Products Requirements Pharmaceutical Sales Rep Requirements/Experience/Qualifications: * Some sales experience and/or abilities * Consultative selling experience preferred. * Must be able to work remotely and the ability to use ZOOM software. * Excellent written and oral communication skills. * Ability to target health professionals to maximize sales growth and increase product volume. * Posses effective selling skills and product knowledge to influence targeted health care professionals to prescribe promoted products. * Analyze territory information to optimize routing and achieve sales results. * Utilize sales tools, resources and supporting analysis to plan activity. * Develop and execute plans to maximize selling resources. * Pre-call plan to match health care professionals' (HCP) needs. * Leverage data and customer knowledge to build discussions around HCP's and patients’ needs. * Actively pursue continuous learning and professional development on efficient sales, communication and product knowledge training. * Perform company business in accordance with all regulations and policies and procedures. * Demonstrate high ethical and professional standards at all times. Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Paid Time Off (Vacation, Sick & Public Holidays) Family Leave (Maternity, Paternity) Training & Development Here, every Pharmaceutical Sales Rep matters and you will be a vital contributor to our inspiring, bold mission. If you are qualified you will hear back from our Human Resource staff to proceed in the hiring process. We are a EEO employer of minorities, women, disabled, protected veterans, and considers qualified applicants with criminal histories in accordance with applicable laws.

Charlotte Tilbury is currently recruiting Freelance Makeup Artists to join the team. This position will be part of the Charlotte Tilbury Freelance Makeup Artist team. As a member of the Charlotte Tilbury Freelance Makeup Artist team you will need strong artistry, sales and service talents. You will be teaching customers Charlotte’s secrets of artistry learnt in over 20 years of working at the top of the industry with top celebrities and brands. You will deliver Charlotte’s philosophy of artistry made easy, and be part of the building an amazing beauty business. You will need to be sales driven and have experience in beauty and retail. Requirements The Freelance Makeup Artist role is responsible for promoting and creating makeup magic in store. Always representing the ethos, products, and image of Charlotte Tilbury. Working as part of an elite team, the Freelance Makeup Artist drives business in store through exceptional makeup artistry and customer service. The Freelance Makeup Artist will reflect the brand values and customer base. Responsible for achieving sales targets through the creation of an amazing experience and exemplary service. This role exudes passion and enthusiasm for Charlotte Tilbury to the customer, delivering her philosophy of artistry made easy along with unique and personalized shopping experience. Main Duties: Sales: Strive to achieves event sales goals, and sales per hour target. Create brand awareness through the sharing and demonstration of your product knowledge. Demonstrate entrepreneurial spirit within the parameters of the company guidelines. Customer Service: Lead by example at all times to promote the Tilbury Touch and exceptional customer service. Team Work: Demonstrate a positive ad cooperative approach towards your work and your colleagues Assist and maintain an atmosphere of open and positive communication, professionalism ad creativity at all times. Operations: Ensure the counter/gondola is “customer ready” from open to close of business Maintain excellent counter hygiene standards. Clean display units, tools and testers throughout the day. Assist with maintaining the required inventory levels to include stock counts, rotation, timely replenishment. Assist with visual merchandising, new launch displays, and collateral placement through communication with Sales and Artistry Executive. Assist in the execution of events Maintain consistent communication with Brand field team regarding any counter/gondola needs or concerns. Maintain high standards managing schedule, clocking in and out and submitting time sheets on payroll application (allwork)

Are you a tech-savvy problem solver with a passion for excellent customer service? We want YOU! 🌟 Position: 1099 Contract Satellite Installer Location: Nationwide - Work anywhere in the USA What You’ll Do: 🌐 Install satellite internet systems at customer locations 🛰️ Mount satellite dishes on roofs or other suitable spots 🔧 Run cables and connect equipment for perfect signal reception 📡 Configure and program satellite receivers 🛠️ Test and troubleshoot to ensure everything’s working smoothly 💬 Provide top-notch customer service and answer questions 📚 Educate customers on using their new satellite systems What You Need: 💡 Strong knowledge of telecom systems and equipment 🔌 Experience with fiber splicing and low voltage cabling 🛠️ Skilled with hand tools and network installation (Cisco routers a plus!) 🧩 Excellent problem-solving skills 🗣️ Great communication abilities 🤝 Ability to work independently or as part of a team 🛠️ Previous experience as a service technician is a bonus Perks: 💵 Competitive pay per completed installation 🆓 All necessary training provided 🚀 Opportunities for career growth in a dynamic industry Ready to elevate connectivity across the nation? Apply now and become a part of our stellar team! 🌟 Go here to apply: starlinkinstallationpros [dotcom] /installers Requirements Ladder capable of 3 stories Tools for facilitating a starlink install Ability to climb on roofs Carry your own liability insurance Be authorized to work in the United States Benefits 1099 contract work. No taxes taken out. You keep 100% of what you make. You run your own small business and take advantage of all the benefits that come with that.

We are seeking a skilled and motivated Heavy Equipment Field Technician to join our client's team. As a Field Technician, you will be responsible for diagnosing, repairing, and maintaining heavy equipment used in various industries. Your role will involve troubleshooting mechanical issues, performing inspections, and completing necessary repairs or part replacements. You will work directly at client sites, ensuring that the equipment is functioning optimally and minimizing downtime. Attention to detail, strong technical skills, and a commitment to safety are essential for success in this role. If you are a team player who enjoys working in a dynamic environment, we would love to hear from you! Consults with Service Supervisor to plan effective work and travel schedule, giving priority to customer need, considering location of machine and availability of parts. Diagnose malfunctions: repairs and/or replaces worn and defective parts; installs new assemblies, adjusts devices and controls - to correct malfunctions and to keep machines in operating condition. Provides tools and parts and arranges for facilities to perform repair work (usually on customer premises). Inspects, operates, and tests machines upon initial delivery, at specified inspection intervals and upon completion of any repair work to ensure proper functioning of equipment and its components. Reports to Service Supervisor such information as name of customer, description of machine, nature of malfunction, the time involved in working, driving, and waiting, mileage, etc., so that proper accounts can be charged, and proper billing can be made. Strives to increase technical skills through attendance at company-sponsored vocational schools, annual training meeting of departmental personnel and reading of technical literature. Promotes and enhances the company image by maintaining a neat, personal appearance and by keeping the service truck in a clean, polished, and orderly condition. Experienced or advanced servicemen are expected to serve as troubleshooters on recurring or unusual problems, conferring with Engineering, Manufacturing, and other service personnel to resolve. Experienced or advanced servicemen will be expected to train new servicemen or to supervise a team of servicemen in the assembling or servicing of large units or in a joint effort on large repair jobs. Requirements Experience working on heavy equipment or generators preferred Experience working with mechanical, electrical and hydraulic equipment 2+ years of field service experience preferred Ability to pass a background check, drug screen, MVR and physical Experience working with customers Benefits Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Public Holidays)