Auto-apply to these tech jobs

JOIN OUR TEAM AND EXPERIENCE ENDLESS CAREER POSSIBILITIES IF YOU ARE AN EXISTING TEAM MEMBER, PLEASE CLICK THE FOLLOWING LINK TO BE TAKEN TO THE INTERNAL CAREER SITE: MOHEGAN INTERNAL CAREER SITE Position Summary: This position is responsible for daily inspections, installations, and repairs of kitchen equipment. Primary Duties and Responsibilities: includes but not limited to: Conducts daily inspections on the kitchen equipment and communicates with the Food and Beverage department for repair needs Performs preventative maintenance and repairs of all kitchen equipment including ovens, boilers, mixers, choppers, toasters, glass washers and commercial and industrial dishwashing equipment Repairs all commercial and industrial food service equipment Responsible for the proper operation, repair and maintenance of the grease removal systems Secondary Duties and Responsibilities: Responsible for the installation of new commercial kitchen equipment Performs minor fabrications Assists with snow removal, as needed Minimum Education and Qualifications: Five years of experience with Commercial and/or Residential Appliance repair, or an active G-2 or above (S-2, E-2 or D-2) State of Connecticut Occupational Trade License Experience with the repair, maintenance and installation of all commercial kitchen cooking and food preparation equipment Experience with gas piping systems, gas control systems, boilers and heat exchange systems (gas, steam or electric fired) Must be able to pass both a written and verbal technical proficiency test and demonstrate skills necessary to perform the job functions Possesses knowledge of methods, materials, tools and practices of the trade Must be able to read and work from blue prints Competencies: Incumbent will master the following competencies while in this position: Good written and verbal communication skills Knowledge of EPA regulations within the commercial appliance trade Experience with pneumatic systems Experience with maintaining, troubleshooting and calibrating of chart recording devices Training Requirements: Knowledge of the occupational hazards and safety requirements of the trade Able to read and comprehend electrical wiring diagrams and schematics Ability to diagnose and trouble shoot electronic equipment Knowledge of motor controls, electric motors and AC/DC speed controls Ability to read, comprehend and follow factory service manuals OSHA Lockout/Tag out procedures Spill Prevention Control and Countermeasure training Forklift training Confined space training Physical Demands and Work Environment: Must be able to work in and around a fast paced commercial kitchen environment Must be able to lift up to 50 lbs. Must be able to bend, stoop, reach and climb a ladder Must be able to work various shifts and flexible hours This is not necessarily an exhaustive list of all responsibilities, requirements or working conditions associated with this job. Mohegan Sun reserves the right to make changes to the above job description whenever necessary. Work Shift: Regular Knock, knock. Hear that sound? That's opportunity! . Mohegan Sun practices Native American Preference in hiring. "Native American" means an individual who is a duly enrolled member of the Mohegan Tribe or any group of Native Americans recognized by the Mohegan Tribe, The United States of America, or the State of Connecticut.

Equipment Service Technician About Us Carrols Corporation is the largest BURGER KING franchise. We are currently looking for an experienced individual to fill the position of Equipment Service Technician for a group of our Burger King Restaurants. Reporting to the District Manager, the candidate will be responsible for completing the duties required to maintain the physical integrity of each assigned restaurant through the implementation of preventative maintenance and responding to the maintenance needs of each restaurant. Essential Duties and Responsibilities: Prioritize and complete needed repairs as they occur in a timely fashion. Work with the R&M Budget to implement preventive maintenance procedures as defined by company representatives. Develop a work schedule to minimize the impact on customer service and restaurant operations. Qualifications: The candidate must have the ability to work independently. This individual must have the ability to communicate with management and coworkers, and the ability to comprehend and appropriately react to others. The candidate must have the ability to perform multiple tasks, adjust to changing assignments and maintain productivity, composure and a pleasant attitude under pressure. Education and Experience: General electrical, plumbing, carpentry knowledge is necessary. General mechanical knowledge required. Food Service Equipment Repair experience is a plus. Certification in HVAC repair is a plus. High School Diploma or equivalent Valid Driver's License required. Independent Reliable Transportation required Basic computer skills required. We provide a compensation package that includes Medical, Dental, Vision, Life Insurance and Dependant Life Insurance. We also offer Short-term and Long-term Disability Insurance; Uniform Allowance, Incentive Bonus Plan, 401(k), Tuition Assistance, Mileage Reimbursement, Direct Deposit, and an Employee Assistance Program.

Position: Behavioral Health Technician Job Summary: Supporting individuals in recovery with day-to-day tasks and collaborating with various departments to promote a supportive and effective recovery environment. Duties and Responsibilities: Duties include, but are not limited to: Provide support, guidance and monitoring to individuals in Residential treatment. Monitor client progress and ensure adherence to program guidelines. Completes billing and documentation accurately in a timely manner. Participation in community activities best represents the professional image of Lighthouse. Keep well documented notes and communicate daily shift notes with Behavioral Health Technician Lead, clinical, and medical teams as needed. The Behavioral Health Technician will serve as a role model, act as a mentor, advocate, and motivator. Establish rapport with clients, work with a diverse population, verbally de-escalate crisis, maintain the confidentiality of protected and sensitive information, develop and maintain effective working relationships with associates, family members, social service agencies, and other job-related contacts. Must be able to function with a high degree of problem-solving skills. According to client needs, the client care advocate is expected to prioritize, self-direct, and organize daily activities. Accountable for effective care coordination and communicates effectively and clearly with internal and community treatment teams. Assist with facility management including coordinating and serving meals and housekeeping duties. Participate in clinical treatment activities and ensuring activities comply with the provisions of HIPAA and 42 CFR. Other duties as assigned. Required Experience/Certifications: Minimum high school diploma/ G.E.D Previous experience as a client advocate, PCA, or similar position. Knowledge of Electronic Health Records systems Must pass BCI check, all Corporate Compliance checks, and employment drug Valid driver's license, proof of auto insurance, and access to a reliable personal vehicle Age 25 years or older Desired Experience/Certifications: CDCA Serve Safe Certification Schedule: This is a full time position. Shift opportunities, including days, evenings, nights, weekends, and holidays based on facility needs. Compensation: $17.00 - $24.81 Location: 4000 E Main St Whitehall, OH 43213

Let's be unstoppable together! At Circana, we are fueled by our passion for continuous learning and growth, we seek and share feedback freely, and we celebrate victories both big and small in an environment that is flexible and accommodating to our work and personal lives. We're a global company dedicated to fostering inclusivity and belonging. We value and celebrate the unique experiences, cultures, and viewpoints that each individual brings. By embracing a wide range of backgrounds, skills, expertise, and beyond, we create a stronger, more innovative environment for our employees, clients, and communities. With us, you can always bring your full self to work. Join our inclusive, committed team to be a challenger, own outcomes, and stay curious together. Circana is proud to be Certified by Great Place To Work. This prestigious award is based entirely on what current employees say about their experience working at Circana. Learn more at www.circana.com. What will you be doing? We are seeking a highly skilled senior AI Technology Sales specialist to join the team responsible for building and deploying cutting-edge AI solutions across a broad range of clients in the Consumer Packaged Goods (CPG), General Merchandise, and Retail industries. The role is focused on nurturing and closing leads with various stakeholders, both technical and non-technical, across new and existing clients. You will be working closely with a team dedicated to building and deploying today's and tomorrow's AI solutions focused on democratizing data and substantially increasing the efficiency and effectiveness of our clients' organizations. Job Responsibilities Grow revenue by collaborating with client insight teams to expand the base of new and existing clients interested in our AI solutions and develop and execute strategic sales plans to achieve targets. Conduct detailed presentations and demonstrations of our AI solutions, illustrating their benefits and alignment with client objectives. Build and maintain long-lasting client relationships with various technical and non-technical stakeholders including senior leadership. Work closely with client insight teams to ensure a cohesive approach throughout the sales cycle, from initial client engagement to deal closure and post-sale support. Leverage in-depth Consumer Packaged Goods (CPG), General Merchandise, and/or Retail industry knowledge to understand market trends and client challenges to effectively position our AI solutions. Gather client feedback and market intelligence to guide on-going product enhancements and innovation. Maintain a pipeline and provide comprehensive updates on account status, including opportunities, trends, challenges, and competitive activities to ensure accurate sales forecasting and strategy adjustment. Act as a liaison between clients and cross-functional internal teams, ensuring the timely and successful deployment of our solutions. Lead sales team globally. Requirements Minimum of 7 years experience in technology sales, with a proven track record of driving revenue growth in a senior sales role. Extensive experience in Consumer Packaged Goods (CPG), General Merchandise, and/or Retail industries with a deep understanding of the Market Research industry. Strong passion for AI overall and a deep understanding of AI technologies and their applications in business settings. Strong analytical and problem-solving skills, with the ability to be creative and nimble when warranted as well the ability to synthesize complex information and present it clearly and succinctly. Excellent leadership and cross-functional team management skills, including experience collaborating with diverse and geographically dispersed teams. Outstanding communication and interpersonal skills, capable of working with both technical and non-technical stakeholders as well as the ability to engage and influence stakeholders at all levels. Bachelor's degree in Business, Computer Science, AI, or a related field. Master's degree preferred. Circana Behaviors As well as the technical skills, experience and attributes that are required for the role, our shared behaviors sit at the core of our organization. Therefore, we always look for people who can continuously champion these behaviors throughout the business within their day-to-day role: Stay Curious: Being hungry to learn and grow, always asking the big questions. Seek Clarity: Embracing complexity to create clarity and inspire action. Own the Outcome: Being accountable for decisions and taking ownership of our choices. Center on the Client: Relentlessly adding value for our customers. Be a Challenger: Never complacent, always striving for continuous improvement. Champion Inclusivity: Fostering trust in relationships engaging with empathy, respect, and integrity. Commit to each other: Contributing to making Circana a great place to work for everyone. Location This position can be located in the following area(s): United States Prospective candidates may be asked to consent to background checks (in accordance with local legislation and our candidate privacy notice ) Your current employer will not be contacted without your permission. The below range reflects the range of possible compensation for this role at the time of this posting. We may ultimately pay more or less than the posted range. This range may be modified in the future. An employee's position within the salary range will be based on several factors including, but not limited to, relevant education, qualifications, certifications, experience, skills, seniority, geographic location, performance, shift, travel requirements, sales or revenue-based metrics, any collective bargaining agreements, and business or organizational needs. The salary range for this role is $250,000 to $300,000. This job is also eligible for bonus pay. We offer a comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. The anticipated application deadline for this position is 11/20/2025. You can apply for this role through methods such as our Careers website link and/or Intranet site for internal candidates. This role is subject to AI-assisted screening. Circana uses artificial intelligence (AI) to assess resumes for alignment with job requirements by helping locate details in resumes that relate to the job description. #LI-JT1

At Gerdau, we empower our people to grow, thrive, and make a difference-together. With a culture built on trust and teamwork, we offer meaningful work, continuous development, and opportunities to shape your future. We invite you to come work with us, where your contributions are valued, your voice is heard, and your career is forged with purpose. JOB: Hydraulic Repair Technician "A" SCOPE Primary: - Inspects plant hydraulic equipment for defects, such as misalignment, wear, insufficient lubrication, etc. Troubleshoots and analyzes repair, installation and determines best way of making repairs to minimize interruption of production. Advises when immediate shutdown of equipment is necessary to minimize damage or when temporarily continued operation will have no harmful effect. Dismantles, cleans, repairs, replaces, installs, maintains, assembles and lubricates hydraulic and mechanical equipment. Adjust equipment for proper operating characteristics, making either temporary or permanent repairs. Operates machine tools, such as drill press, pipe threading machine, power tools, etc. Performs all rigging as necessary. Performs pipefitting and other repairs of hydraulic lines as required and fabricates hose assemblies. Assembles or align gears, bearing and shafts, involving press, sliding and running fits in hydraulic pumps. Changes, sets up and adjust equipment as required by current operating equipment conditions. Designs alterations to existing hydraulic system. Performs minor electrical work required in the servicing, installation and repair of directional valves. Solenoids, etc. Reads, understands schematics, drawing and makes sketches if necessary for repair or installation work. Documents all work performed on Computerized Maintenance Management System (CMMS). All other tasks assigned by management. Secondary: - Works with repair crew on emergency and other breakdowns as required. Purchases part for hydraulic systems and assures that necessary spare parts and assemblies are available. Performs light welding where required in association with routine/emergency repair or installation work. Observes good housekeeping and safety on the job site, hydraulic repair shop and maintenance shop. Utilization of EMM and GBS concepts. >TRAINING AND/OR BACKGROUND REQUIREMENTS: 1 year hydraulics experience and Hydraulics Journeyman's Card or 6 years hydraulics experience without Journeyman's Card High school diploma or GED and NEW/EXISTING EMPLOYEES MUST ALSO HAVE THE FOLLOWING: Pass all testing requirements Complete training checklist for this position REPORTS TO: >DIRECTLY: Maintenance Supervisor >INDIRECTLY: Superintendent of Maintenance QUALITY RELATED RESPONSIBILITIES: Machinery must be maintained to obtain the highest quality possible Employee will follow current Quality System policies and practices to strive for zero defects and continuous improvements. SAFETY RELATED RESPONSIBILITIES: Must lock out all equipment prior to repairing it. Must perform all repairs following Gerdau Safety Policies. Observe and follow all departmental safety rules and regulations (inc. Cardinal Safety Rules). COST/PRODUCTION RELATED RESPONSIBILITIES: All equipment must be maintained to minimize plant down time. ENVIRONMENTAL RELATED RESPONSIBILITIES: Employee is expected to know, understand, and follow all applicable Federal, State, and Local environmental legal requirements and practices. Responsible for and completing all required annual safety and environmental training (inc. fugitive dust). Responsible for spill prevention, containment, response and clean up or assist in clean up of material spills. Tasks which have significant environmental impacts are (i.e. process pond water, spill prevention, KO61 dust (bag house dust) PM's and calibration of equipment). Note: The information listed in this description reflects the general details considered necessary to perform the principal functions of the job identified. This information is not to be construed as a list of the work details and requirements that this job may be required to perform from time to time. The incumbent is responsible for his/her safety as well as his/her colleagues, seeking continuous improvement related to employee's health and safety, environment and the process efficiency and customer's satisfaction with the quality of products and services. All efforts must be directed for preventive actions.

Position Summary/ Objective: Collaborating closely with the Maintenance Supervisor, Manager, and/or Director, the Maintenance Tech 2 advances beyond basic maintenance tasks to execute complex repairs and oversee projects within the resort facility. This intermediate-level position requires a strategic and detail-oriented approach, emphasizing not only advanced technical proficiency but also a steadfast commitment to safety. Actively participating in safety programs and adhering to industry-standard safety practices, the Maintenance Tech 2 contributes to maintaining the operational integrity of the property while fostering a secure and hazard-free environment for team members and guests. Primary Essential Functions: All associates are obligated to support and uphold the values, expectations, policies, and procedures of Grand Pacific Resorts as outlined in the Employee Handbook. Independently troubleshoot, diagnose, and resolve complex issues related to building systems and equipment. Apply proficient skills in two or more of the following trades to ensure quality is maintained throughout the resort: electrical, carpentry, plumbing, HVAC, and appliance repair. Provide guidance and assist in the training of junior team members in troubleshooting, diagnostics, and repair procedures. Continuously enhance technical skills through training programs and on-the-job experience. Utilize Computerized Maintenance Management System (CMMS) and other mobile apps to create and close work orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used). Participate in routine inspections and audits, providing insights and recommendations for improvement. Maintain maintenance inventory and requisition parts and supplies as needed. Follow written and verbal instructions and complete documentation associated with work orders/guest requests. Communicate with resort guests to triage facilities issues, set service response expectations, and validate that work has been completed to quality control and guest expectations. Develop and maintain positive working relationships across all levels of the organization. Adhere to all OSHA and other regulatory agencies having jurisdiction on health and safety regulations. Understand and follow safe work practices in accordance with the OSHA/Resort Safety Programs and Emergency Response Manual. Actively participate in safety programs, ensuring adherence to OSHA regulations and resort safety protocols. Promote and uphold a safety-first culture within the maintenance team, leading by example. Participate on the Resort Safety Committee and Emergency Response Team. Report injuries, illnesses, workplace hazards, issues with tools, equipment, machines, unsafe acts/unsafe conditions to the respective Supervisor/Manager and or Safety Committee. Adhere to the Lockout/Tagout program and procedures overseeing its application and ensuring team members follow established protocols.

Thank you for considering a career at Roper St. Francis Healthcare! 7:00am-3:30pm Job Summary: Responsible for accomplishing corrective maintenance and preventative maintenance on various equipment and systems. Create a successful customer service relationship. Performs a variety of duties, related to all maintenance disciplines including: electrical, plumbing, HVAC, fire alarm, pneumatic tube, all central energy plant equipment, carpentry, and other responsibilities as assigned. Provides in-depth knowledge and trouble shooting skills on the above maintenance disciplines. Assists and trains other staff members with maintenance repairs and preventive maintenance procedures. Responsible for the progress of assigned job(s) under minimal supervision. Assists in the development, scheduling and assignment of the PM program. Minimum Qualifications: Education: Obtain GED within 6 months of hire, High School Graduate or equivalent preferred. Experience: Minimum of three years of experience in the maintenance field, preferred experience in a Health Care Environment. Licensure/Certification: Must have a current valid SC Drivers License. Primary Source Verification (if applicable): N/A Knowledge/Skills: Must be able to work with all types of hand tools and power tools and has in-depth knowledge of maintenance disciplines. Prefer healthcare DHEC, NFPA and TJC specific code knowledge. Must have a working knowledge in computers to complete assigned work orders and preventative maintenance using the maintenance software program. Prefer experience with healthcare HVAC, electrical, plumbing, and physical plant equipment. Other: This position requires operation of a vehicle for Roper St. Francis Healthcare business. Due to this job requirement, the selected candidate/employee must possess a valid, current South Carolina driver's license. In addition, the selected candidate/employee must be insurable under the Roper St. Francis Healthcare vehicle insurance plan, which will be verified by reviewing licensure and driving record. Contacts: Interaction with internal and external customers to include (but not limited to) patients, families, physicians, employees and visitors. Work Demands/Environment: Constant standing and walking. Heavy physical effort which includes lifting, moving or carrying, pushing or pulling up to 60 lbs. Constant use of finger/hand dexterity. Constant reaching with hands/arms. Intermittent stooping, kneeling, crouching or crawling. Frequent climbing or balancing. Corrected hearing and vision to normal range. Ability to judge distances and spatial relationships (depth perception). Possible exposure to infectious materials, communicable diseases and/or other conditions common to a healthcare environment. Constant exposure to wet or humid (non-weather) conditions. Constant exposure to dust, fumes, gases, or airborne particles. Constant exposure to toxic or caustic chemicals. Intermittent exposure to risk of electrical shock. Intermittent exposure to vibration. Moderate to loud noise level in work area. Must be able to work in a hospital environment. May be required to take call and/or work weekends/holidays based on the needs of the department. Requires hand-eye coordination. Must be available to report to work and stay through duration of emergency situations (i.e., hurricanes, earthquakes, etc.). As a Roper St. Francis Healthcare teammate, you're part of a Mission that matters. We support your well-being-personally and professionally. Our benefits are built to grow with you and meet your unique needs, every step of the way. What we offer Competitive pay, incentives, referral bonuses and 403(b) with employer contributions (when eligible) Medical, dental, vision, prescription coverage, HSA/FSA options, life insurance, mental health resources and discounts Paid time off, parental and FMLA leave, short- and long-term disability Tuition assistance, professional development and continuing education support Benefits may vary based on the market and employment status Roper St. Francis Healthcare is an equal opportunity employer. It is our policy to abide by all Federal and State laws, as well as, the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a).Accordingly, all applicants will receive consideration for employment without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, age, genetic information, or protected veteran status, and will not be discriminated against on the basis of disability. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact The Talent Acquisition Team at recruitment@RSFH.com

SBM Management is searching for a Utility Technician! Responsible for supporting all departments including Cork & White, Lock & Key, the Furniture Warehouse, the Signage Department, and Conference Center Services as needed. This person will be supplied with their own tools and equipment. This person must be flexible and have the ability to work under pressure and be able to meet deadlines with high accuracy. Responsibilities Responds to requests for room setups per daily schedule. Follow all company Procedures, policies and rules. Deliver and setup additional furniture as necessary. Knockdown and properly store furniture as necessary. Maintain daily tracking log sheet. Maintain clean working area. Any other duties requested by management. Installing new cork and white boards. Removal, relocation and reinstallation of cork and white boards. Removal and disposal of damaged cork and white boards. Hanging of pictures, plaques and banners. Installation of under the desk keyboard tray. Wall mounting of large or oversized white and cork boards. Clean up of work area after installation. Track and report time spent on work orders. Hang other customer items as necessary. Responds to requests for materials in support of facilities maintenance contract personnel and vendors. Locates requested material in automated inventory system. Initiates system query and clarifies proper selection of item with requestor as necessary. Verifies that the queried item is available by locating it in the warehouse. Pick material for distribution. Assemble Furniture i.e. Peds, desks, round tables. Operate a pallet jack, forklift or flatbed when appropriate to pick, store, and transport material. Occasional Floor Work (Monthly and Quarterly) and work on special projects: Spot cleaning, shampooing of carpets, high dusting) Qualifications Highschool Diploma/GED 2+ year min experience in Custodial/Floor Care or Maintenance experience. Must have experience operating Floor care machinery. Be able to take initiative, work as a team member and communicate effectively Be able to lift at least 35 lbs. Shift: Monday- Friday 7:00 am- 4:00 pm Compensation: $18.00-$19.00 per hour SBM Services, LP and its affiliates are proud to be equal opportunity workplaces. We are committed to equal employment opportunity regardless of race, sex, color, ancestry, religion, national origin, sexual orientation, citizenship, age, marital status, disability, gender identity, Veteran status, or other legally protected status.

The Electro-Mechanical Technician 2 is responsible for the day-to-day troubleshooting and preventative/predictive maintenance. This worker acts as a junior-level material handling technician on all equipment that is installed at the Vandalia, OH site location. This will be a night shift position working from 6:00 pm - 6:00 am, rotating Panama shift. We offer: What We Offer Career Development Competitive Compensation and Benefits Pay Transparency Global Opportunities Learn More Here: https://www.dematic.com/en-us/about/careers/what-we-offer/ Dematic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The base pay range for this role is estimated to be $26 - $31.50 an hour at the time of posting. Final compensation will be determined by various factors such as work location, education, experience, knowledge, and skills. Tasks and Qualifications: What You Will Do In This Role Conduct repair and maintenance of Material Handling Equipment (MHE), including belt tracking, component adjustment/replacement, and component lubrication. Complete preventative maintenance routines, documentation, and procedures to maintain equipment reliability. Accurately build and close work orders in the asset management system, detailing labor hours, equipment maintenance, and parts used. Troubleshoot basic communication issues and effectively apply resources to solve them. Locate and track spare parts from inventory to ensure smooth operations. Respond to semi-complex service calls and address equipment failures and faults accurately and promptly. Identify problems as they arise and take appropriate steps to address them successfully. Foster and maintain positive working relationships across all organizational levels. What We Are Looking For HS diploma or equivalent experience required; vocational-technical training is advantageous. Capability to lift and move material up to 50 pounds. Regularly engage in bending, lifting, stretching, and reaching both below the waist and above the head. Occasionally push and pull wheeled dollies loaded with products up to 100 pounds. Demonstrate functional dexterity in both hands and wrists. Safely climb ladders and gangways without limitation. Adjust to various work environments with limited space, dust, odors, noise, and concrete floors. Stand and walk for up to 10-12 hours. Flexibility to cover multiple shifts and holiday hours as needed. Join us to be a part of a team that values your contribution and supports your growth.

City/State Norfolk, VA Work Shift Multiple shifts available Overview: Sentara Health is seeking to hire a qualified individual to join our team as a Emergency Department Technician. This position is on-site in Norfolk, Virginia. Position Status: Full-time (36 hours a week), night shift Position Location: Sentara Norfolk General Hospital Emergency Department Standard Working Hours: Night Shift - 7:00PM - 7:00AM Overview Assists the Physician, Advanced Practitioner, or Nurse in implementing plans of care for emergency/minor emergency care patients. Performs patient procedures and treatments under the supervision of the Physician, Advanced Practitioner, or Nurse. De-escalation and physical intervention training within 15 days of hire. BLS certification within 90 days of hire for all incumbents. Education High School Diploma or equivalent Certification/Licensure New incumbents must have one of the following in addition to the minimum Education : EMT-B with state or national certification at time of hire OR Successful completion of US Military Hospital Corps School, qualified MMAC candidates OR Current student enrolled in clinical program (e.g., RN, LPN, Respiratory, Physical Therapy) having completed at least one semester within the program. Candidates with prior employment in the Sentara ED tech job code in the past two years will also be considered in lieu of the 3 criteria above. Experience Previous clinical experience . Benefits: Caring For Your Family and Your Career Medical, Dental, Vision plans Adoption, Fertility and Surrogacy Reimbursement up to $10,000 Paid Time Off and Sick Leave Paid Parental & Family Caregiver Leave Emergency Backup Care Long-Term, Short-Term Disability, and Critical Illness plans Life Insurance 401k/403B with Employer Match Tuition Assistance - $5,250/year and discounted educational opportunities through Guild Education Student Debt Pay Down - $10,000 Reimbursement for certifications and free access to complete CEUs and professional development Pet Insurance Legal Resources Plan Colleagues may have the opportunity to earn an annual discretionary bonus if established system and employee eligibility criteria is met Here at Sentara, we are committed to consistently enhancing our training, advancement tracks, work-life benefits, and more. Our goal is to make you feel more excited to be here every day! Sentara Norfolk General Hospital, located in Norfolk, VA, is a 525-bed tertiary care facility that is home to the only Level I Adult Trauma Center and burn trauma unit in Hampton Roads, and also serves as the primary teaching hospital for Eastern Virginia Medical School. In addition to the high-quality heart program at Sentara Heart Hospital, our facility is home to Nightingale Regional Air Ambulance and several other dedicated facilities and specialized services. As a recognized accredited Comprehensive Stroke Center, and Magnet hospital for nursing excellence, our hospital specializes in heart and vascular, neurosciences, neurosurgery, urology, oncology, spine care, advanced imaging, behavioral health, maternity, and women's health, including a state-of-the-art neonatal intensive care unit. Sentara Health is an equal opportunity employer and prides itself on the diversity and inclusiveness of its close to an almost 30,000-member workforce. Diversity, inclusion, and belonging is a guiding principle of the organization to ensure its workforce reflects the communities it serves. In support of our mission "to improve health every day," this is a tobacco-free environment. For positions that are available as remote work, Sentara Health employs associates in the following states: Alabama, Delaware, Florida, Georgia, Idaho, Indiana, Kansas, Louisiana, Maine, Maryland, Minnesota, Nebraska, Nevada, New Hampshire, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.

Innovation starts from the heart. Edwards Lifesciences is the leading global structural heart innovation company, driven by a passion to improve patient lives. With millions of patients served in over 100 countries, each team makes a meaningful contribution by improving patient outcomes and discovering lasting solutions for unmet patient needs. Our Sr. Technician position is a unique career opportunity that could be your next step towards an exciting future. Provide technical manufacturing support to Operations and Engineering. Key Responsibilities: Perform weekly preventive maintenance routines for equipment to avoid program down time Check for failures in equipment and perform corrective actions to affected areas that have down time, including conducting and writing impact assessment reports of incidents Execute experiments and tests (following protocols) to develop findings for the validation and improvement of equipment and manufacturing processes/methods based on engineering principles; analyze results, make recommendations, and develop reports for Engineering review Review documentation and take appropriate actions to ensure that information is appropriately catalogued and follow through to validation and qualification of equipment, including transferring information to appropriate locations, e.g., ECRs, SOPs, drawings, and tooling, for Engineering approval Identify potential improvement opportunities and propose solutions to optimize equipment, e.g., re-design/design of basic equipment, tools, fixtures, for Engineering review Troubleshoot basic manufacturing equipment May lead small projects related to new equipment validation, equipment investigations, testing, objective evidence of product dispositions and rework Utilize manufacturing software (e.g., JDE, QMS,PLM) to update documentation in systems Provide coaching and guidance to technicians Other incidental duties Education and Experience: H.S. Diploma or equivalent 4 years experience related experience Required or Associate's Degree or equivalent 2 Years experience related experience Required previous experience in manufacturing and/or medical device experience Preferred Additional Skills: Good written and verbal communication, interpersonal, and relationship building skills Problem solving methodology, root cause analysis, and GDP (Good Documentation Practices) Good computer skills, including usage of MS Office Suite Moderate knowledge of validation and improvement of automated equipment Ability to troubleshoot manufacturing equipment Basic knowledge of material compatibility in the proposed use environment Moderate knowledge of routine preventive maintenance of production equipment Moderate knowledge electrical, mechanical, electronic, pneumatic, and controls Knowledge of and adherence to Edwards Environmental Health and Safety and Quality guidelines as they relate to department clean room medical device manufacturing Knowledge of Good Manufacturing and Good Documentation Practices supporting a medical device environment Strict attention to detail Must be able to work under limited supervision Adhere to all company rules and requirements (e.g., pandemic protocols, Environmental Health & Safety rules) and take adequate control measures in preventing injuries to themselves and others as well as to the protection of environment and prevention of pollution under their span of influence/control Edwards is an Equal Opportunity/Affirmative Action employer including protected Veterans and individuals with disabilities. COVID Vaccination Requirement Edwards is committed to protecting our vulnerable patients and the healthcare providers who are treating them. As such, all patient-facing and in-hospital positions require COVID-19 vaccination. If hired into a covered role, as a condition of employment, you will be required to submit proof that you have been vaccinated for COVID-19, unless you request and are granted a medical or religious accommodation for exemption from the vaccination requirement. This vaccination requirement does not apply in locations where it is prohibited by law to impose vaccination.

Important Application Submission Information In order to ensure your application is successfully received before the job posting expires, please submit your application by 11:59 PM on Thursday, February 19, 2026 More than a career - a chance to make a difference in people's lives. Build an exciting, rewarding career with us - help us make a difference for millions of people every day. Consider joining the Duke Energy team, where you'll find a friendly work environment, opportunities for growth and development, recognition for your work, and competitive pay and benefits. Program Location for 2026: Potential opportunities at locations across our footprint in North Carolina/South Carolina. A Substation or Line Technician Summer Intern will assist a higher-level technician in activities associated with transmission line/substation construction and maintenance and learn how our power grid operates. Transmission systems and components deliver high voltage electricity from generation facilities (power plants, wind, solar, etc.) to the customer distribution system (lines/substations that feed homes and businesses). Interns will work directly with experienced technicians to assist them with and learn more about the construction and maintenance activities required to keep our grid reliable and to safely meet customer needs. Duties and Responsibilities Clearly understand the importance of company safe work practices and safety rules Basic understanding of the Human Performance Tools and requirements Basic understanding of the isolation of substation and line equipment and grounding practices Demonstrates good verbal and written communications skills Basic understanding of electrical drawings (substation equipment schematics and power system drawings) Basic understanding of NERC compliance and the importance for accurate data and timely completion of assigned work Basic electrical and mechanical troubleshooting skills Develops the ability to think methodically and arrange activities in logical order Basic understanding of pneumatics and hydraulics systems Exposure to Transmission and Distribution system switching activities Develop a basic understanding of AC and DC basic principles Demonstrate the basic ability to operate bucket, digger derrick truck and other areal devices Develop a basic understanding of Power Grid Operations construction and maintenance standards Basic/ Required Qualifications Currently enrolled and pursuing a two degree in Engineering Technology or related field Must have a valid State Driver's License and the ability to obtain a CDL Class A Driver's License Additional Preferred Qualifications Strives to continually improve job-related, technical and professional knowledge, skills, and performance Develops positive working relationships and effective oral and written communication skills Supports the company's goals and represents the company positively and professionally Demonstrated ability to pass panel review by meeting or exceeding requirements for step progression Software skills including word process, email, spreadsheets etc. Basic written and oral communication skills Working Conditions Field Mobility Classification - Work will be performed in various field locations, as needed, after the onboarding period. However, field employees are required to live within a reasonable daily commute to their assigned work location. Reliable, consistent transportation is required to ensure timely arrival at the applicable facility. Demonstrated availability for after- hour's work Ability to lift and carry 50 lbs. Ability to work in a diverse environment with individuals from various socio-economic and cultural backgrounds Must be capable of working on elevated work surfaces This position contains a weight restriction of 275 pounds as an essential function of the job. The purpose of this restriction is to ensure that all weight rated equipment is used in an appropriate and safe manner within maximum allowed weight loading. Ability to pass required testing to be eligible for interview Ability to pass pre-employment background check and drug screening Ability/willingness to work outdoors in various weather conditions Travel Requirements Relocation Assistance Provided (as applicable) No Represented/Union Position No Visa Sponsored Position No Please note that in order to be considered for this position, you must possess all of the basic/required qualifications. Privacy Do Not Sell My Personal Information (CA) Terms of Use Accessibility

Equipment Service Technician About Us Carrols Corporation is the largest BURGER KING franchise. We are currently looking for an experienced individual to fill the position of Equipment Service Technician for a group of our Burger King Restaurants. Reporting to the District Manager, the candidate will be responsible for completing the duties required to maintain the physical integrity of each assigned restaurant through the implementation of preventative maintenance and responding to the maintenance needs of each restaurant. Essential Duties and Responsibilities: Prioritize and complete needed repairs as they occur in a timely fashion. Work with the R&M Budget to implement preventive maintenance procedures as defined by company representatives. Develop a work schedule to minimize the impact on customer service and restaurant operations. Qualifications: The candidate must have the ability to work independently. This individual must have the ability to communicate with management and coworkers, and the ability to comprehend and appropriately react to others. The candidate must have the ability to perform multiple tasks, adjust to changing assignments and maintain productivity, composure and a pleasant attitude under pressure. Education and Experience: General electrical, plumbing, carpentry knowledge is necessary. General mechanical knowledge required. Food Service Equipment Repair experience is a plus. Certification in HVAC repair is a plus. High School Diploma or equivalent Valid Driver's License required. Independent Reliable Transportation required Basic computer skills required. We provide a compensation package that includes Medical, Dental, Vision, Life Insurance and Dependant Life Insurance. We also offer Short-term and Long-term Disability Insurance; Uniform Allowance, Incentive Bonus Plan, 401(k), Tuition Assistance, Mileage Reimbursement, Direct Deposit, and an Employee Assistance Program.

Department: Laboratory, Work Hours: rotating shifts, weekends, and holidays as needed. The Laboratory Processing Technician II is responsible for the performance of EKGs, collection of specimens within the employee's scope of training including legal specimen collection, and preparation of all specimen types. Assists with patient registration, laboratory report distribution and other clerical duties. Mans and troubleshoots the pre-analytical automation as assigned. Provides training and/or orientation for internal employees and external customers. Promotes and maintains a professional manner in all situations. Requirements Four year high school graduate or GED equivalent with phlebotomy or Medical Assistant Training and ACT 169 clearance. Successful completion of Acts 73 and/or 169 clearances within 90 days of commencing employment, if applicable. Preferred: A.S.C.P. certification in phlebotomy

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. The world builds on itself every day. At JLL, we network with tech school partners to connect with industrial maintenance talent equipped for a modern economy. Register here if you will soon or have recently graduated from a certificate or Associate's degree program related to industrial maintenance, reliability, or automation. By providing your resume and contact information, you'll network with astute technical recruiters, enhance your job search, and speed up the application process. If your qualifications align with upcoming openings, our recruiting team will contact you to discuss. In addition, we encourage you to visit our Careers page to explore current openings and activate a personal job alert. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Estimated compensation for this position: per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: -Baton Rouge, LA, Boise, ID, Des Moines, IA, Houston, TX, Matteson, IL, Miami, FL, Milwaukee, WI, Minneapolis, MN, Niagara Falls, NY, Orlando, FL, Seattle, WA, Somerset, NJ, WINDSOR, CT If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here. Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at HRSCLeaves@jll.com. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our Supplemental Privacy Statement which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

$25.00 per hour Position will be on 2nd or 3rd shift, needing some weekend availability. PRECISION, SPEED, AND TECH - KEEP THE LUGGAGE MOVING! The Baggage System Support Technician maintains the cleanliness and functionality of automated baggage handling systems, ensuring safe, efficient operation while assisting with equipment jams and learning under the guidance of maintenance and control room staff. WHAT IT'S LIKE TO WORK AS A BAGGAGE SYSTEM SUPPORT TECHNICIAN Clear and reset baggage system jams and faults to minimize downtime and disruption Remove, sort, and transport luggage using baggage utility carts to designated locations Monitor and communicate baggage system faults to appropriate personnel Adhere to all safety protocols and regulatory standards (e.g., FAA, OSHA) Manually encode and scan baggage tags at designated stations as needed Learn to inspect and understand BHS equipment performance under supervision Exemplify PrimeFlight customer service and safety standards Perform any additional duties as assigned by management WHY WORK FOR PRIMEFLIGHT? Enjoy benefits like 401(k) with matching, health, dental, vision, and life insurance, paid time off, growth opportunities, and more (*part-time benefits may vary) We are committed to being a leading provider of commercial services within the aviation industry Our teams focus on maintaining a positive working environment and treating all team members with respect With more than 200 locations across the world, we offer opportunities for career progression Enjoy a competitive pay scale QUALIFICATIONS 18 years of age or older Eligible to work in the United States High School Diploma/GED required Aviation Industry experience a plus High attention to detail Provide excellent customer service Bilingual in English/Spanish a plus Must have a valid state-issued driver's license with an acceptable driving record Communicate effectively in English (reading, writing, speaking) Ability to access and interpret information in print and electronically, including the use of electronic devices including IPads/Tablets, Computers, and Mobile Devices Effectively communicate with colleagues and clients, both in-person and through electronic means Must possess the versatility, flexibility, and a willingness to work with constantly changing priorities Must be able to report to work on a regular, consistent, and timely basis; must be prompt and maintain good attendance Must possess the ability to be a self-starter, work independently and as a member of various teams Pass a background check and drug screen Eligibility to acquire needed credentials and clearances (FAA, TSA, Port Authority, U.S. Customs and U.S. Postal- as applicable) Airlines are 24/7, so we need our team members to be flexible to work various shifts including nights, weekends and holidays To perform this job successfully, an individual must be able to perform each essential requirement satisfactorily. The requirements listed above are representative of the work environment, knowledge, skill, and/or ability. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential requirements. PHYSICAL ACTIVITY/WORKING CONDITIONS MAY INCLUDE: Ability to lift up to 90 pounds Prolonged standing and walking in an indoor/outdoor environment as applicable May need to reach with arms and grasp with hands May need to push, pull May need to crawl and crouch, at times, in confined tight spaces May need to bend, stretch, squat, kneel May need to climb and work at elevated heights Exposure to moderate and at times high noise levels Exposure to outdoor elements Be able to hear and respond to the spoken voice and to audible alarms Tasks may involve repetitive motions of the arms, wrists, hands and/or fingers Specific vision abilities required for this job include: Close vision (clear vision at 20 inches or less); distance vision (clear vision at 20 feet or more); peripheral vision (ability to observe an area that can be seen up and down or to the left and right while eyes are fixed on a given point); depth perception (three-dimensional vision, ability to judge distances and spatial relationships); ability to adjust focus (ability to adjust the eye to bring an object into sharp focus) The pay rate listed on this post is what the company reasonably expects to pay for this position. However, individual compensation may vary based on factors including qualifications, skills, competencies, education, and experience. PrimeFlight Aviation Services, Inc. is proud to be an equal-opportunity employer. All applicants and employees are considered and evaluated for positions at PrimeFlight Aviation Service, Inc. without regard to race, ethnicity, religion, color, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability, or any other protected status in accordance with all applicable federal, state/province, and local laws.

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. The world builds on itself every day. At JLL, we network with tech school partners to connect with industrial maintenance talent equipped for a modern economy. Register here if you will soon or have recently graduated from a certificate or Associate's degree program related to industrial maintenance, reliability, or automation. By providing your resume and contact information, you'll network with astute technical recruiters, enhance your job search, and speed up the application process. If your qualifications align with upcoming openings, our recruiting team will contact you to discuss. In addition, we encourage you to visit our Careers page to explore current openings and activate a personal job alert. This position does not provide visa sponsorship. Candidates must be authorized to work in the United States without employer sponsorship. Estimated compensation for this position: per year This range is an estimate and actual compensation may differ. Final compensation packages are determined by various considerations including but not limited to candidate qualifications, location, market conditions, and internal considerations. Location: -Baton Rouge, LA, Boise, ID, Des Moines, IA, Houston, TX, Matteson, IL, Miami, FL, Milwaukee, WI, Minneapolis, MN, Niagara Falls, NY, Orlando, FL, Seattle, WA, Somerset, NJ, WINDSOR, CT If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays Early access to earned wages through Daily Pay At JLL, we harness the power of artificial intelligence (AI) to efficiently accelerate meaningful connections between candidates and opportunities. Using AI capabilities, we analyze your application for relevant skills, experiences, and qualifications to generate valuable insights about how your unique profile aligns with the specific requirements of the role you're pursuing. JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here. Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at HRSCLeaves@jll.com. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Pursuant to the Arizona Civil Rights Act, criminal convictions are not an absolute bar to employment. Pursuant to Illinois Law, applicants are not obligated to disclose sealed or expunged records of conviction or arrest. Pursuant to Columbia, SC ordinance, this position is subject to a background check for any convictions directly related to its duties and responsibilities. Only job-related convictions will be considered and will not automatically disqualify the candidate. California Residents only If you are a California resident as defined in the California Consumer Privacy Act (CCPA) please view our Supplemental Privacy Statement which describes your rights and disclosures about your personal information. If you are viewing this on a mobile device you may want to view the CCPA version on a larger device. Pursuant to the Los Angeles Fair Chance Initiative for Hiring Ordinance, JLL will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance. Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records. Accepting applications on an ongoing basis until candidate identified.

Position Overview A Technician is responsible for the set up and operation of basic / small-scale audiovisual systems in a hospitality environment while ensuring complete customer satisfaction. This position reports to an Operations Manager, Operations Director or Director, Event Technology. Key Job Responsibilities Equipment Operation Ensures a flawlessly executed event through accurate and timely setup, operation, and breakdown of basic audiovisual equipment as listed in the technical qualifications section. Customer Service Strives to exceed the expectations and needs of internal and external customers. Maintains a positive relationship with all clients through effective communication. Meets with guests on site to ensure that their needs are met, and the equipment setup is working properly. Monitors events and checks in on customers throughout the day. Understands and fosters the hotel/client relationship. Technical Ability Understands the technical aspects of the job and demonstrates basic operational ability to troubleshoot and problem solve with equipment and software issues. Handles equipment challenges and changes in a timely and professional manner. Systems Knowledge Understands company processes, follows procedures, and completes systems entry and paperwork accurately. Uses the equipment sheets to determine the equipment scheduled for set up and for strike. Interacts with other staff and outside vendors for equipment. Increases revenue by utilizing floor up-selling techniques. Works with clients to finalize invoices. Completes order entries in Navigator, as needed. Job Qualifications High School Diploma required. Associate's degree is preferred. Internal applicants must meet/complete all training and certification requirements as determined by Encore's Global Learning Training Program in their current position, and for the position they are applying to. Click to review the requirements: https://tinyurl.com/yaznwvk7 External applicants must meet/validate and achieve/complete all training and certifications required for this position, within one year. For technical external requirements, view our career path here: https://jobs.encoreglobal.com/en/career-paths 1 year of customer service or hospitality experience is preferred. 1 year of audio-visual experience or equivalent in an educational environment is preferred. A valid driver's license is required for team members that may operate Company vehicles. Additional DOT requirements may need to be met if applicable. Must be able to lift 50 lbs. Competencies Deliver World Class Service Hospitality Ownership Do The Right Thing Instills Trust Safety Conscious Drive Results Action Oriented See The Big Picture Tech Savvy Value People Communicates Effectively For more information on our Competency Group, refer to the Competency Based Talent Management page on Encore Connect by searching for the title or copy & pasting this URL Link ( https://psav.sharepoint.com/sites/HR/SitePages/Competency-Supported-Talent-Management.aspx ). Physical Requirements Team members must be able to meet the physical demands outlined below to successfully perform the essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The frequency options are defined as: Continuously, Frequently, Occasionally, and Never. Sitting: 2-3 Hours Standing: 4-5 Hours Walking: 4-5 Hours Stooping: 2-3 Hours Crawling: 2-3 Hours Kneeling: 2-3 Hours Bending: 2-3 Hours Reaching (above your head): 2-3 Hours Climbing: 0-1 Hours Grasping: 4-5 Hours Lifting Requirements 0 - 15 lbs:* Continuously 16 - 50 lbs*: Frequently 51 - 100 lbs: Occasionally Over 100 lbs: Occasionally Carrying Requirements 0 - 15 lbs*: Continuously 16 - 50 lbs*: Frequently 51 - 100 lbs: Occasionally Over 100 lbs: Never Auditory/Visual Requirements Close Vision: Continuously Distance Vision: Continuously Color Vision: Frequently Peripheral Vision: Occasionally Depth Perception: Frequently Hearing: Continuously Pushing/Pulling Requirements 0 - 15 lbs*: Continuously 16 - 50 lbs*: Frequently 51 - 100 lbs*: Frequently Over 100 lbs: Occasionally Note: The physical requirements marked with an asterisk () indicate activities performed without assistance.* Team members must be able to meet the physical demands above in order to successfully perform the essential job functions. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Environment Hotel Work is performed in a hotel/convention center environment with moderate exposure to outdoor temperatures and to dirt, sand and/or dust. The working conditions will vary between moderately quiet to noisy volumes. Team members will use high-end audio-visual equipment and electrical components and will be exposed to heights via lifts and ladders. Team members may be asked to work in multiple hotel locations. Working times will include irregular hours and on-call status including days, evenings, weekends, and holidays. Team members must adhere to appearance guidelines as defined by Encore based on an individual hotel or a representation of hotels in that city or area. Warehouse Work is performed at event venues as well as in a warehouse environment. Team members must adhere to appearance guidelines as defined by Encore based in a warehouse environment and when traveling, on an individual venue or a representation of venues in that city or area. When in the Warehouse, work will be completed in an environment with exposure to outdoor temperatures and to dirt, sand and/or dust. The working conditions will vary between moderately quiet to noisy volumes. Team members may use high-end audio-visual equipment and electrical components. Working times may include irregular hours and on-call status including days, evenings, weekends, and holidays. The above information on this description is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements or working conditions associated with the job. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned.

If you are wondering what makes TRIMEDX different, it's that all of our associates share in a common purpose of serving clients, patients, communities, and each other with equal measures of care and performance. Everyone is focused on serving the customer and we do that by collaborating and supporting each other Associates look forward to coming to work each day Every associate matters and makes a difference It is truly a culture like no other - We hope you will join our team! Find out more about our company and culture here. The Sterilization Technician II focuses heavily on steam sterilizers, washer decontaminators, cart washers, internal steam generators, stand alone steam generators, and all supporting equipment. Knowledge of Steris, Amsco and/or Getinge sterilizers is beneficial but not required. This position is required to be familiar with many classes of clinical equipment and may perform maintenance on equipment outside of the specialty. Should be available for travel as required. The Sterilization Technician II installs, inspects, troubleshoots, repairs, calibrates, and verifies the performance of complex sterilization and decontamination equipment and systems, with minimal supervision. The Sterilization Technician II ensures regulatory compliance, assists in inventory management, and may serve as an advisor to other TriMedx personnel on technical matters concerning specialty equipment. The individual demonstrates adherence to the TriMedx core values in all professional interactions by showing respect to all people, creating real value, initiating meaningful change, and exhibiting integrity. Responsibilities Technical Service (40%) Conduct performance assurance (PA) inspections, scheduled maintenance, and operation verification procedures (OVP) on complex medical sterilization and decontamination equipment and systems. Repair and calibrate medical sterilization and decontamination equipment and systems. Inform supervisors of the status of repairs, scheduled inspections, unusual equipment situations, and any customer concerns. Work with, direct, and document the activities of subcontractors, vendors, and outside service technicians to ensure proper service delivery. Maintain field related expertise through ongoing training and education. Assist with Service Operations Special Projects as assigned and contribute to the development of others through mentoring and sharing expertise. Regulatory Compliance (25%) Ensure the accuracy and integrity of the equipment database to include the inventory, performance assurance (PA) schedules, nomenclature, and service history. Adhere to the Medical Equipment Management Plan (MEMP), including all regulatory agency compliances and other applicable policies and procedures. Responsible for ensuring that all service and documentation is complete, timely, and accurate. Account Relationship Management (25%) Build and maintain customer relationships. Discuss equipment status and functionality with customers. Adheres to the Mission, Vision, and Values of the organization(s) served. Serve as an ambassador for TRIMEDX by integrating the core values into job performance. Inventory (10 %) Perform periodic inspections of current inventory status and maintain common failure parts inventory to ensure equipment uptime Verify the completion of security analysis for new customer equipment. Performs Incoming Inspections (II) to maintain a complete and accurate inventory of medical devices, including trial and evaluation, rental, and loaner equipment in addition to permanently assigned equipment inventory. Maintain the accuracy and integrity of the equipment database to include inventory, performance assurance (PA) schedules, nomenclature, and service history. Make recommendations regarding inventory. Skills and Experience Minimum 3 years' experience in the repair, maintenance, troubleshooting, and installation of sterilization and decontamination equipment. AC/DC electrical knowledge required, must be able to read and understand wiring diagrams and schematics. Plumbing knowledge required, must be able to read and understand piping diagrams and identify basic plumbing components. Troubleshoot and repair electrical motor circuits, internal steam generators, and pneumatic systems. Sweat copper pipe, create flare and swage connections. Use and understand the operation of a digital multi-meter and amp meter. Perform temperature and pressure calibrations on sterilization and decontamination equipment. Ability to verbally explain the difference between gravity, pre-vacuum, and liquid sterilization cycles; what a biological indicator is and how it is used; what a sterilization integrater is and how it is used; and the instrument flow of the Sterile Processing Department (SPD). Ability to integrate information from a variety of sources. Excellent interpersonal and customer service skills. Strong written and verbal communication skills. Valid driver's license required; variable travel requirements depending on primary site or region that may require use of personal vehicle. Education and Qualifications 2 year degree in a technical/electronics field or equivalent experience required. This requirement will be waived if the applicant has received the TRIMEDX Trained Certification or completed an equivalent biomedical related certification program. Routinely employ fine motor skills during the installation, servicing, and maintaining of sterilization and decontamination equipment. Bend, crouch, kneel, climb, balance, or otherwise maneuver body while servicing and repairing sterilization and decontamination equipment. Operate tools/machinery that use hand and/or foot controls (e.g. drills, saws, electronic test equipment, etc.) when servicing medical equipment. Lift, carry, or otherwise move up to 50 lbs. while working with sterilization and decontamination equipment. Knowledge of Microsoft Office (Excel) and networking applications required. At TRIMEDX, we are committed to cultivating a workplace culture where every associate feels valued, supported, and empowered to thrive. This culture reflects our belief that our people are our foundation, their well-being is essential, and shared success is built through meaningful work, recognition, and opportunities for growth. We embrace people's differences which include age, race, color, ethnicity, gender, gender identity, sexual orientation, national origin, education, genetics, veteran status, disability, religion, beliefs, opinions and life experiences. Visit our website to view our Workplace Culture Commitment , along with our social channels to see what our team is up to: Facebook, LinkedIn, Twitter. TRIMEDX is an Equal Opportunity Employer. Drug-Free Workplace. Because we are committed to providing a safe and productive work environment, TRIMEDX is a drug-free workplace. Accordingly, Associates are prohibited from engaging in the unlawful manufacture, sale, distribution, dispensation, possession, or use of any controlled substance or marijuana, or otherwise being under the influence thereof, on all TRIMEDX and Customer property or during working/on-call hours.