Auto-apply to these web design jobs

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. PRODUCT DESIGN ENGINEER, CONSUMER HARDWARE (STARLINK)   At SpaceX we’re leveraging our experience in building rockets and spacecraft to deploy Starlink, the world’s most advanced broadband internet system. Starlink is the world’s largest satellite constellation and is providing fast, reliable internet to millions of users worldwide. We design, build, test, and operate all parts of the system – thousands of satellites, consumer receivers that allow users to connect within minutes of unboxing, and the software that brings it all together. We’ve only begun to scratch the surface of Starlink’s potential global impact and are looking for best-in-class engineers to help maximize Starlink’s utility for communities and businesses around the world. Starlink Mechanical & Design Engineers at our Bastrop facility are hyper-focused on the high-volume consumer products that we ship directly to customers all over the world. We design this hardware to be both technically sophisticated and easy to use. Our customers currently include teachers in the most remote parts of the Amazon, researchers in Antarctica, digital nomads who travel via RV, emergency responders, commercial airlines, cruise lines, and residential users who live in rural or developing areas. As a member of this team, you will lead creative, multi-disciplinary projects that include designing both the consumer products themselves and the factories that manufacture them, ushering in the next era of the internet and delivering internet to those that need it most.  RESPONSIBILITIES:   Own Starlink consumer hardware from conceptual design through high-volume production and public launch  Develop design criteria, collaborate on requirements, and drive system-level optimization  Test and iterate on products to enable high field reliability and performance in all environments and use cases Design and develop the production lines that manufacture your product, including robot end effector design, process development, control system design, automation programming, and more Refine the production system to create high-rate, high-yield, and reliable processes Establish an efficient product lifecycle starting in the supply chain all the way through final integration that balances cost, complexity, and quality; work closely with partner teams to design and realize an efficient in-house production line BASIC QUALIFICATIONS:   Bachelor's degree in an engineering discipline  Experience with CAD and FEA software packages  1+ years of professional experience with mechanical/electromechanical design, analysis, testing, and/or manufacturing (internship experience is applicable) PREFERRED SKILLS AND EXPERIENCE:   Master’s degree in engineering or a related technical discipline  3+ years of professional experience in mechanical design and analysis 2+ years of hands-on project experience with complex mechanical systems, preferably as a team lead Proficient in 3D CAD (NX preferred) Solid understanding and application of GD&T, mechanical engineering fundamentals, structural analysis, and failure modes of complex mechanical systems Prior ownership of a complex component or assembly from initial design through high-volume production ramp Familiarity with manufacturing processes and how to design for manufacturability Exposure to some variety of production machinery, industrial sensors, and equipment (motion systems, dispense systems, temperature controllers, laser distance sensors, injection molders, die casters, etc.) Self-motivated with strong organizational, written, and oral communication skills ADDITIONAL REQUIREMENTS:   Ability to work long hours and weekends as necessary to support critical milestones  ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .   SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to  EEOCompliance@spacex.com . 

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. MECHANICAL ENGINEER, MACHINE DESIGN (STARSHIP) As a member of the Starship Tooling team, you will work with a team of elite engineers across multiple disciplines to design, build, and activate critical production assets required to build the Starship launch vehicle. This position is based at our Starship production facility in Brownsville, Texas but may involve work on designs that are implemented across all of SpaceX’s sites supporting the Starship program.  RESPONSIBILITIES:  Design, build, and activate custom machinery and infrastructure to enable the production and handling of Starship launch vehicles Develop the Starfactory of the future to enable rapid build, test, and operation of our transport architectures Collaborate with vehicle engineers to influence vehicle design and manufacturing processes to maximize production rate Use your technical knowledge to execute on structural sizing, mechanism design, hardware fabrication, and activation testing to deliver results on projects Create detailed models and engineering prints in NX Perform engineering hand calculations and analysis to size structures and mechanisms. Create manufacturing planning for scope performed by internal welding and toolmaking teams. Support machine activation with controls engineering team and perform development testing with production engineering team. BASIC QUALIFICATIONS: Bachelor’s degree in an engineering discipline Experience using a CAD software design package (e.g. Solidworks, NX, CATIA, or ProE) 1+ years of total experience in one or more of the following: involvement with an outside of the classroom project designing and building mechanical structures; academic research on mechanical structures; professional experience designing and analyzing mechanical structures PREFERRED SKILLS AND EXPERIENCE: Ability to prioritize and execute tasks in a fast-paced, dynamic environment Ability to work in a collaborative team environment, including daily interactions with engineers, technicians, suppliers, and leadership Experience working in a production facility with equipment and machinery Experience managing large CAD assembly models and drawings Experience with finite element analysis Experience designing and fabricating mass efficient welded structures Experience designing and testing mechanisms Strong understanding and application of GD&T ADDITIONAL REQUIREMENTS: Ability to pass Air Force background check for Cape Canaveral Willing to travel to other SpaceX locations as necessary Work schedule may vary depending on site operational needs, and flexibility is required Lifting, standing, climbing, bending, grasping, sitting, pulling, pushing, stooping, stretching, and carrying are generally required to perform the functions of this position COMPENSATION AND BENEFITS:          Pay range:     Mechanical Engineer/Level I: $95,000.00 - $115,000.00/per year     Mechanical Engineer/Level II: $110,000.00 - $130,000.00/per year          Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short & long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation & will be eligible for 10 or more paid holidays per year. Exempt employees are eligible for 5 days of sick leave per year. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .   SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to  EEOCompliance@spacex.com . 

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars. STRUCTURES DESIGN ENGINEER (FALCON & DRAGON) As a Structures Design Engineer, your design work and assembly configuration management will contribute to new development and support of our existing vehicle fleets. You will have the opportunity to work with your team and across partner teams on the Falcon and Dragon programs toward the successful flights of Falcon and Dragon. Additionally, you will have the opportunity to work with teams across SpaceX to advance our goal of making life multi-planetary. RESPONSIBILITIES:   Design and develop groundbreaking hardware for Falcon and Dragon vehicle upgrades and new mission profiles using NX, including metallic and composite structures, soft goods, fluid/propulsion systems, and avionics hardware under accelerated timelines Generate detailed component and assembly drawings using GD&T and perform tolerance stack-up analysis Responsible for overall CAD integration and hardware packaging for vehicle systems. Manage cross-discipline interfaces to ensure proper clearances and fit-up (Interface Control Drawings, etc.) Apply first principles methodology and design for manufacturing concepts to create innovative solutions for challenging problems in spacecraft and launch vehicle development BASIC QUALIFICATIONS: Bachelor’s degree in an engineering discipline 1+ years of mechanical design and drafting experience (including internships or personal projects) 1+ years of experience with 3D CAD software (NX, Solidworks, etc.) PREFERRED SKILLS AND EXPERIENCE:  Solid understanding and application of GD&T and tolerance stack-ups Hands-on experience working in project teams designing hardware in a highly constrained system under defined timelines Familiarity with welded/bolted structures, composites and fluid systems Ability to manage large assembly models and drawings Ability to work and communicate well in an integrated team including daily interactions with technicians, engineers, and leadership Creative problem solver that can bring multiple disciplines together to achieve buy-in for a unified design direction Self-motivated with strong multi-tasking, organizational, communication, documentation and rigorous attention to detail skills Experience with FMEA and FEA 2+ years experience with a 3D modeling software (NX preferred) ADDITIONAL REQUIREMENTS:  Must be able to work long hours and weekends as necessary Must be able to travel to various SpaceX sites (up to 25%) COMPENSATION AND BENEFITS:           Pay range: Structures Design Engineer/Level I: $95,000.00 - $115,000.00/per year Structures Design Engineer/Level II: $110,000.00 - $130,000.00/per year  Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.  Base salary is just one part of your total rewards package at SpaceX. You may also be eligible for long-term incentives, in the form of company stock, stock options, or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan. You will also receive access to comprehensive medical, vision, and dental coverage, access to a 401(k) retirement plan, short and long-term disability insurance, life insurance, paid parental leave, and various other discounts and perks. You may also accrue 3 weeks of paid vacation and will be eligible for 10 or more paid holidays per year. Employees accrue paid sick leave pursuant to Company policy which satisfies or exceeds the accrual, carryover, and use requirements of the law. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here .   SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to  EEOCompliance@spacex.com . 

Claros is a power management solutions company that is innovating at the intersection of power and compute to make AI more sustainable and widely available. By driving down the cost and complexity of power delivery and leveraging innovative hardware and software, the company seeks to decrease energy consumption, optimize power delivery, increase compute performance, and maximize the efficiency of AI operations. About Claros Claros innovates at the intersection of power and compute. We build advanced semiconductor power management solutions that improve AI compute capacity, efficiency and reliability. Claros is an early-stage startup company located in Torrance, CA. If you are looking for challenging work and a strong technical environment with the collaborative & supportive culture, then Claros Tech is the company for you. We offer industry the best competitive pay & benefits and early-stage stock options. Location: Minimum of 3 days a week in the office in Torrance, CA. About the Team We are open-minded, fast paced, problem solvers that value open dialogue and candor. Our passion is to challenge the status-quo and we embrace transformational thinking. Our response is never “no, but….” instead “yes, if….”. We are mindful of our personal and organizational blinders and try to build an environment where our team members are At Their Best. About The Role Claros Inc. is seeking to hire an exceptional Senior Principal Analog Power Management Integrated Circuit (PMIC) Design Engineer (Technical Lead) to join our ASIC team in Torrance, CA. Candidate must be self-motivated individual to contribute to the evolution of Analog/Mixed-Signal (AMS) circuits, covering PMICs (Low-dropout (LDO) linear voltage regulators, Switching regulators, DC-DC Buck Converters), ADC/DAC, PLL, Gate Drivers, and PMIC chip integration). As a Senior level tech lead, you'll play a crucial role in design and development of Power management ICs from concepts into release to production, collaborating closely with other circuit designers, and leveraging sophisticated tools. This role will report to the VP of Engineering. What You Will Do In this role, you will be responsible for the design and development of high-performance analog circuits for PMICs used in a range of applications. Collaborate with other engineers to define and implement design methodologies and best practices for PMIC design and related areas. Plan and lead a group of designers in implementation of commercial product. Work with multi-disciplinary teams including R&D, systems, testing to implement new ideas and in writing the specifications, design, characterization, verification and documentation. Summarize and interpret results of highly complex performance checks and review it with team. Use problem solving skills, experience, and supervise the layout circuit designers. Guide them with floor planning and in resolving DRC/LVS errors. Behavior and transistor level circuit design, simulation and verification of power management blocks including LDO, Switch Mode Power Supplies (buck, boost), voltage reference and other analog circuits meeting power, performance and area specifications. Work closely with PCB layout engineers to ensure performance and quality of the designs. Work with team on best packaging approach for design and test. Datasheet drafting and reviews . Work with product managers to develop the next generation of products . What You Bring Bachelor’s degree in electrical engineering with 8+ years of overall experience in analog/mixed signal IC Design. Knowledge of semiconductor manufacturing processes and their impact on analog circuit design. Experience is designing circuits in High voltage (BCD) technology processes and FinFET technology (like 12nm and below) is preferred. Strong background in Power Management devices and circuit design principles, Buck Converters Architecture & Design, Mixed Signal Design, Gate Drivers, PLL & Clock Chip Design. Must have released at least one full IC design from Concept to release to production. Good knowledge in device physics and device reliability analysis. Proficiency in using Cadence IC Design Tools. Familiarity with industry standard interface protocols such as SPI, I2C, PMBus/SMBus. Ability to document design techniques, test and verification methodology. Conduct design reviews, analyze and debug circuits, and perform system-level testing to validate performance and ensure compliance with specifications. Full chip integration and Top-Level Simulations. Strong analytical and problem-solving skills, with the ability to debug complex issues. Excellent communication and collaboration skills to work effectively in a team environment. Ability to effectively prioritize and execute tasks in a high-pressure environment. What Is Helpful Master’s degree in electrical engineering with 5+ years of overall experience in analog/mixed signal IC Design. Knowledge in writing Verilog/VHDL modeling. Experience with layout design, layout review, and layout versus schematic (LVS) verification. Knowledge in Python/Perl script development and MATLAB simulations are a plus. What We Offer Career track opportunity with potential for rapid advancement with strong performance as the firm grows. 100% employer paid, comprehensive health care including medical, dental, and vision for you and your family. Paid maternity and paternity for 14 weeks at employees' normal pay. Unlimited PTO, with management approval. Opportunities for professional development and continued learning. Optional 401K, FSA, and equity incentives available. Salary Range : $155,000-$230,000. This represents the typical salary range for this position based on experience, skills, and other factors.

What We're Looking For At HNTB, you can create a career that is meaningful to you while building communities that matter to all of us. For more than a century, we have been delivering solutions for some of the largest, most complex infrastructure projects across the country. With our historic growth, it is an exciting time to join our team of employee-owners. This opportunity entails being responsible for assisting assigned department(s) and/or project(s) by performing basic engineering related tasks which may reflect elements of standard post-secondary engineering curriculum.Relocation and housing are not provided for this position.Our Design Build Department is seeking a Roadway Intern Engineer in our Kansas City, MO office for Summer 2026. What You’ll Do: Assists engineer teams in various tasks and duties. Assists Engineer with research, development and design of projects. Assists Engineer with the preparation of engineering drawings and documents as assigned. Performs other duties as assigned. What You’ll Need: High School Diploma/GED or equivalent plus current enrollment in an accredited post-secondary engineering program What You’ll Bring: Understands engineering, geometric, and algebraic principles at a basic level. Shows proficiency with Microsoft Office Suite. Accepts and applies direction from peers and supervisors. Obtains an understanding of introductory shop drawing and submittal procedures and requirements. Ability to perform basic engineering calculations Ability to organize information for use in drawings or other documents What We Prefer: Completion of 2 years of post-secondary engineering program AutoCAD and/or MicroStation experience. Strong interest in transportation and infrastructure Additional Information Click here for benefits information: HNTB Total Rewards Click here to learn more about Equal Opportunity Employer/Disability/Veteran Visa sponsorship is not available for this position.#MZ . Locations: Kansas City, MO . . . . . . . . . . . . . . . . . . NOTICE TO THIRD-PARTY AGENCIES: HNTB does not accept unsolicited resumes from recruiters or agencies. Any staffing/employment agency, person or entity that submits an unsolicited resume to this site does so with the understanding that the applicant's resume will become the property of HNTB. HNTB will have the right to hire that applicant at its discretion and without any fee owed to the submitting staffing/employment agency, person or entity. Staffing/employment agencies who have fee agreements with HNTB must submit applicants to the designated HNTB recruiter to be eligible for placement fees.

Job Description: Do you have a strong technical mindset and a desire to contribute to an organization in a role that offers high visibility and the chance to make a real impact? Miller Electric, an ITW company, is seeking a Technical Product Specialist to join our marketing team within the Welding Accessories and Cutting Division. We are looking for someone eager to dive deep into our technical products and services in this customer-facing role. In this role, you will drive sales by actively listening to customer needs, analyzing product features, and offering tailored support. By partnering with the Engineer, Marketing and Sales teams, you will ensure smooth customer transactions and elevate the overall product experience, building long-lasting partnerships and achieving successful sales outcomes in our fast-growing weld environmental solutions segment of the division. How you will make an impact: Customer Engagement Collaborates with internal sales team, distributor partners and end-users to understand customer requirements. Prepares and delivers technical presentations to communicate the company’s products value propositions, performance and services to customers. Helps customers understand product installations requirements through onsite discovery visits. Solicits and documents client feedback. Evaluating the data to further enhance customer experience satisfaction and drive new strategies. Trains other internal and external stakeholders on the technical aspects of the company's products and services. Prepares quotations for projects using quote software by selecting appropriate product, pricing, and establishing installation labor estimates. Technical Design Reviews plans and RFQs (Request for Quote) then produces technical support documentation and submittals to satisfy project and bid requirements. Designs layouts for equipment needs and system requirements for customers using AutoCad. Works with suppliers to communicate lead times and identify solutions. Cross Functional Collaboration Collaborates with project coordinator, sales, marketing and engineering teams. Identifies areas for improvement and communicates issues to key stakeholders including leadership. Additional functions/duties as assigned. What you need to do to be successful: Communication - Utilizing exceptional interpersonal and customer service skills to share technical information effectively to stakeholders and customers with various familiarity with the product. AutoCad Proficiency - Creating and modifying detailed drawings for customer installations and custom applications using AutoCad. Problem-Solving - Demonstrating excellent technical and problem-solving abilities to address and resolve issues efficiently. HVAC/Industrial Ventilation Knowledge – willing to learn basic principles of HVAC/industrial ventilation to design and layout ductwork as well as other components. Leadership and Teamwork - Exhibiting strong leadership and teamwork skills to collaborate effectively with colleagues and lead projects. Sales and Customer Relationship Management - Use customer relationship management and sales skills to enhance customer interactions and drive business growth. Process Ownership: working with a highly visible centralized product line, take ownership of the process and communication with cross-functional areas to help deliver on key objectives and targets, with the goal to continue significant growth for the division. Travel for installations at customer sites, and other responsibilities approximately 10% of the time, with occasional increases up to 25%. Required Qualifications Minimum bachelor’s degree in engineering, or related field. 2 years + of related experience. Preferred Qualifications Experience with AutoCad to create and modify drawings for customer installation and custom applications. Bachelor’s degree preferred or interest in completing bachelor's degree with the financial support of Miller Electric. Industry and regulatory standards experience is preferred. Company Description Comprised of a market-leading portfolio of best-in-class brands, the businesses of ITW Welding work together to provide premium performance delivered through a breadth of solutions encompassing welding, cutting, consumables, and accessories. ITW Welding North America represents Miller Electric Welding Equipment, Safety & Accessories, Hobart Filler Metals, and Bernard / Tregaskiss MIG Guns. Miller Electric Mfg. LLC, is headquartered in Appleton, Wisconsin, and wholly owned by Illinois Tool Works (NYSE: ITW). The company maintains its industry leadership by setting the standard for reliability, quality and responsiveness. Our tagline, “The Power of Blue®,” is inspired by the blue color of Miller equipment. The company began with an innovation that responded to customer needs, growing from a one-man operation in 1929, to the world’s largest manufacturer of arc welding products. Miller keeps the tradition alive by focusing on its top priority: people. Additional Information ITW Welding is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected Veteran status, age, or any other characteristic protected by law.

Mechanical System Design and Analysis Engineer (Associate or Mid-Level) Company: The Boeing Company The Boeing Additive Manufacturing (BAM) organization is seeking a high performing Mechanical System Design and Analysis Engineer (Associate or Mid-Level) in El Segundo, CA to design, analyze and provide oversight to the development and flight production of additively manufactured system components within the Boeing Auburn fabrication center. Our team is currently hiring for a broad range of experience levels including associate and mid-level engineers. This candidate will be a part of a high-performing engineering team that is immersed in development and high Non-Recurring projects. The engineer will work closely with business units and the BAM Auburn fabrication team to develop and deliver flight components including design, analysis, and test. Emphasis would be on the development, design, analysis, test, and production of the additive process for high IP applications. The candidate should have a background in mechanical systems design and analysis. Competencies needed for this role include Innovation, Design Concepts & Techniques, Analytical Skills (Technical), Collaboration, Communication, Customer Focus, Project Management, and Engineering Judgment. Position Responsibilities: Level 2: Support development and qualification of complex additive manufactured system components Support the development and documentation of mechanical and vibration environments to establish the system design Support activities to validate and verify mechanical systems requirements Develop, integrate and document structural requirements to establish the additive system design Coordinate with other engineering groups to establish the product's environmental requirements Perform product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance Support additive development, qualification testing and production activities and direct the supplier to optimize integration and achieve program goals Develop test plans and configurations, support test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied Level 3: Lead development and qualification of complex additive manufactured system components Lead & provide technical quality review of the development and documentation of mechanical and vibration environments to establish the system design Lead activities to validate and verify mechanical systems requirements Develop, integrate and document structural requirements to establish the additive system design Coordinate with other engineering groups to establish the product's environmental requirements Guide product design and verify structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle to develop the structural environment, characteristics and performance Manage additive development, qualification testing and production activities and direct the supplier to optimize integration and achieve program goals Develop test plans and configurations, support test execution and analyzes/reports test results to validate and verify systems and components meet requirements and specifications Define and document certification and test results to substantiate for customers and regulatory agencies that requirements are satisfied Basic Qualifications (Required Skills/Experience): Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry Experience with flight additive manufacturing implementation Experience with integrated design & analysis (e.g. ProE/CREO or Unigraphics NX) Experience with Geometric Dimensioning and Tolerancing (GD&T) Experience in vibration and analysis and test principles Knowledge or experience using NASTRAN and PATRAN finite element modeling software Fracture mechanics analysis using NASGRO and/or AFGROW Preferred Qualifications (Desired Skills/Experience): Experience with decomposing requirements and development of vehicle architectures. Experience with spacecraft, launch vehicle, vertical lift and other flight vehicle systems Experience in development, build and test of vehicle system components. Experience with requirement verification methods and artifacts. Bachelor or Masters (preferred) Degree in Mechanical, Structural, or Aerospace Engineering Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and several programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range for associate (level 2): $81,600 - $110,400 Summary pay range for mid-level (level 3): $102,00 - $138,000 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: This position offers relocation based on candidate eligibility. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position does not require a Security Clearance. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Closet Factory is hiring an In-Home Design Consultant/Sales Representative in the Central Maryland area. Would you enjoy helping clients design custom storage solutions? Can you benefit from having a flexible/work from home schedule? Do you want uncapped earnings potential? As a Closet Factory Design Consultant, you will work with homeowners to design custom storage solutions. All appointments are provided and pre-qualified! We are looking for people who have: Fun and outgoing personalities. A creative side. Reliable transportation. Attention to detail and strong organizational skills. Ability to learn computer software. Ability to thrive in a full commission/bonus sales environment. Applicants must reside in either Anne Arundel County, Baltimore County, Baltimore City, Carroll County, Cecil County, Howard County, or Frederick County. We offer the following: No cold calling, pre-set appointments. Uncapped earnings. Exceptional training program. (Best in the industry) Ongoing support in design and sales from experienced managers and senior designers. Work out of your home. Fun work environment. Flexible schedule, variable hours and some weekends. Top earners make over $100k annually.

Job Title: Student Assistant Department: School of Arts & Design Supervisor: Martha Ashley Starting Rate of Pay: $8.00 Length of Time: Eligible for rehire on a semester basis. Department Description The Visual Arts department offers a wide variety of studio and lecture courses. The student assistant will assist the Art Instructors with various administrative and organizational skills. Job Description Will learn to work with art materials by checking in orders of art supplies; help organize studios with basic supplies; run errands; occasionally add data to spreadsheets. Help with administrative tasks up to 4 hours per week. Job Location/ Hours Required The candidate will perform most/all job duties in the Art Studios housed in Wilson Commerce and Norton Hall. Hours may vary depending on the job requirements; however, the total number of hours a student employee may work per week is 20 hours. This position requires up to 8 hours per week. Responsibilities : Unpack and check in art supplies Enter data to spreadsheets Run errands Other duties as assigned Required Qualifications: Student needs knowledge of art and graphic design courses and materials, organizational skills, knowledge of copiers and reliability. Desired Skills: Must have a minimum of 3.4 overall GPA Knowledge of art supplies Familiarity with Excel

Base Pay Range: $57,700.00 - $98,100.00Primary Location: USA-MI-Ann Arbor-KLAKLA’s total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits identified below. Interns are eligible for some of the benefits identified below. Our pay ranges are determined by role, level, and location. The range displayed above reflects the minimum and maximum pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including location, job-related skills, experience, and relevant education level or training. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world’s leading technology providers to accelerate the delivery of tomorrow’s electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications Electrical Design Engineers are core to KLA’s technology, while we do not currently have an opening, we are always building our Electrical Engineers talent community, we are interested in learning about your background. Apply to this posting for Future Opportunities with KLA . KLA has a wide range of Electrical Engineering opportunities, from PCB design to system design: The PCB design candidate will produce PCB designs, schematics, and work closely with layout engineers to fabricate printed circuit boards.Familiarity with common electronic blocks such as power supply regulators, isolators, op-amps, ADCs/DACs is desired. Desired qualifications include experience with OrCAD PCB, Altium, PADS, or Eagle; ADS, Hyperlynx simulation experience is a plus.The candidate will work closely with FPGA and firmware engineers to characterize and test full PCB systems.The system design candidate will produce electrical system designs, and work closely with mechanical engineers to ensure everything meets the requirements and is easily serviceable.Design includes power distribution, interconnection diagrams, safety interlocks and supporting hardware, computers, data storage, wired or fiber optic networking, and cabling to connect it all together.Familiarity with AC power distribution is desired. Other useful skills include experience with programmable logic controllers, cable and fiber optic design, ladder logic, or soldering.Strong communication skills and the ability to work on cross-disciplinary teams is a must. Minimum Qualifications Bachelor's Level Degree and 0 years related work experience The company offers a total rewards package that is competitive and comprehensive including but not limited to the following: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. KLA is proud to be an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, national origin, sex, gender identity, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other status protected by applicable law. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at talent.acquisition@kla.com or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA . Please ensure that you have searched KLA’s Careers website for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to talent.acquisition@kla.com to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Job Title Retail Design Consultant, 76th & 3rd Ave, NYC Job Description Who We Are: At Framebridge, we are disrupting the custom framing market by replacing a cumbersome experience with a delightful one. We are taking the market and expanding the market for custom framing, all while building a beloved brand associated with celebrating the best moments in life. In order to fulfill our mission, we have to build a great team across a number of disciplines – ecommerce, retail, design, and manufacturing. We are a growing consumer based business operating online and in retail stores. We deliver high-quality custom products at an affordable price with a quick turnaround. We exist, grow, and ultimately own the market by delighting customers who trust and value us. As a team member of Framebridge you will: Show Pride We stand behind our work, we sweat the details, and we strive for continuous improvement every day. We’re proud to frame the things you love, and show pride in our product and craftsmanship. Embrace Challenges Together We embrace challenges with creative solutions and we know that collaboration is the only way to succeed. We set big goals and keep raising the bar together. Adapt & Act We are creative and solution-oriented, flexible, and proactive. We adapt and act quickly, embracing an environment of constant change. Make It Special We search everyday for opportunities to make our product and experience special. When you are building a business where every piece is priceless, making it special is core. Build to Last We are building a product and a business that are built to last. We work every day to build lasting relationships within our team and with our customers. As a Design Consultant of Framebridge you will: Offer exceptional customer service and represent the brand in our retail stores Apply excellent listening, oral, and communication skills to build relationships with our customers Demonstrate deep product knowledge and design advice to customers Inspect, photograph, and measure artwork utilizing Framebridge tools Answer questions and troubleshoot issues using sound judgment Offer suggestions to innovate and improve our retail experience Anything required to deliver our 100% happiness guarantee Work a flexible schedule including evenings and weekends that meet the needs of the business Who you are: Experience in a customer service, retail, or hospitality role An engaging personality with strong interpersonal and communication skills Interest in design and excitement to work in a creative environment Quick and eager learner of new tools, products, and processes Great time-management, organizational, and problem-solving skills Experience in clienteling outreach and Growing your business through customer relationship Willingness to work flexible hours, including evenings and weekends Benefits/ Perks: Competitive pay Free frames/ employee discount Contests and Incentives Team building events Paid time off Employee Assistance Hotline (EAP) Commuter Benefits Framebridge, in good faith, believes that the posted hourly range is accurate for this role at the time of posting. Framebridge may pay more or less than the posted range based on factors such as relevant experience and skills, qualifications, and location, among others. This range may be modified in the future. In addition to the hourly rate, this role is also eligible to receive a cash bonus as part of the total compensation package. Details and eligibility will be discussed during the application process. Framebridge is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills and experiences within our workforce. We make decisions regarding employment opportunities, including hiring, promotion and advancement, without regard to race, color, national origin, age, religious beliefs, sex (including pregnancy), disability, sexual orientation, gender identity, citizenship status, military status, marital status, genetic information, or any other characteristic protected by federal, state or local laws. Time Type Part time Framebridge is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills and experiences within our workforce.

Welcome to Verdantas, where innovation meets sustainability, and your career finds purpose! At Verdantas, we’re redefining environmental consulting and sustainable engineering through our use of cutting-edge modeling and digital technology and our genuine commitment to people. Our work spans high-growth sectors like water resources, resilient land use, energy transformation, and civil infrastructure. Our commitment to excellence, across more than 90 offices, is championed by a team of over 2,000 experts, scientists, engineers, geologists, and technical specialists, embedded in a people-focused culture, prioritizing the well-being of our employees, clients, and the communities we serve. We partner with clients to deliver smart, data-driven solutions to complex environmental and infrastructure challenges. We don’t just solve problems; we help shape a more sustainable future. Join a people-first culture that values your well-being, empowers your growth, and amplifies your impact. At Verdantas, your career goes beyond the expected, and your work helps build a better world. Ready to shape the future of resilient communities? Verdantas has an immediate need to fill a senior-level civil engineering position. The position involves managing studies and designs for water resources projects. The ideal candidate has the following characteristics: •Foundational experience as a project engineer producing final design products and study analyses and deliverables•Good communication skills with staff and with internal and external clients•Good organization habits, time management, and budget management•Good record of project successes as demonstrated by repeat business from one or more clients•Good references•We’ll consider candidates from outside our area willing to relocate What you bring:•BS degree in Civil Engineering•PE Registration in California, or ability to obtain CA registration within 1 yr•10+ years of experience in the civil engineering field•Potable drinking water experience Additional capabilities desired but not required include:•Potable water treatment, infrastructure design and master planning•Wastewater collection design and master planning•Stormwater system design and master planning Salary Range: $140,000-$200,000 Benefits: Flexible Work Environment Paid Parental Leave Medical Dental Vision Life and AD&D Insurance Short-Term and Long-Term Disability 401(k) with Company Match Paid Time Off + Holidays Verdantas strives to develop new ways to increase diversity awareness within our organization. We recruit and reward our employees based on capability and performance — regardless of race, gender, sexual orientation, gender identity or expression, lifestyle, age, educational background, national origin, religion, or physical ability. For us, it is imperative to build balanced teams from all walks of life and we believe that a diverse workforce is a stronger workforce. Verdantas is an EOE race/color/religion/sex/sexual orientation/gender identity/national origin/disability/vet

The Company: VeSync is a portfolio company with brands that cover different categories of health & wellness products. We wouldn’t be surprised if you have one of our Levoit air purifiers in your living room or a COSORI air fryer whipping up healthy and delicious meals for you every night. We’re a young and energetic company, we’ve had tremendous success, and we are constantly growing our team. As we garner more industry attention – just check out our accomplishments and awards by CES Innovation, iF Design, IGA, and Red Dot – we also need driven and talented people to join our team. That brings us to you, and what you’ll be joining. Our teams are smart and diligent and take ownership of their work – they’re confident in their work but know how to collaborate with open ears and a spirit of learning. If you’re down-to-earth, approachable, and easy to strike up a conversation with, this may be a great fit for you. Check out our brands: levoit.com | cosori.com | etekcity.com The Opportunity: At Vesync we’re passionate about delighting consumers with products and services from our Levoit, Cosori, Etekcity and Arize brands. We’re now looking for a Senior Product Design Engineer to help us shape a new Product Innovation Team in the heart of our biggest market, North America. Our Consumer Insights and User Experience teams contribute daily to the creation of exciting, new consumer products for our brands. Through our consumer-first approach we’re now the number one choice in several major categories. Our growth will continue in our core categories, with the product innovation team focusing some efforts on new products in the adjacent space, however, our opportunity area of focus is in new categories that are supported by enabling technology resulting in smarter products that foster connected lifestyles, making life better for our consumers. Focused on new product creation, the Senior Product Design Engineer will support the Head of Product Innovation and be seen as a senior figure within the newly created team that drives front-end roadmap development in our existing categories as well as new categories. The role will sit in the sweet spot between Design and Engineering to create, prototype and test solutions that align with our established insights/experience, marketing and brand teams based in the US. Concepts will be created then tested with our consumers, prototyped and then validated in the US, with support from our R&D teams in China where required. When the product opportunity is well understood in terms of feasibility across design, engineering, culinary, marketing, brand, CI and legal we can then use the considerable resources of our China teams and suppliers to complete the detail design and manufacturing preparation. What you will do at VeSync: Technical Expert – You will be an authority on consumer product technologies, engineering principles (motorized & heated consumer products), solution selection, manufacturing techniques and material selection across multiple product categories. Builder of Things – Build proof-of-concept rigs with a combination of existing own brand components together with new 3D printed or CNC parts, then build custom micro-controller PCBA’s or Arduino controllers to bring it all together that allows cross-functional teams to provide buy-in early to determine suitability on a product roadmap before moving into the internal development process. Communicate – You will be a strong and convincing communicator within the product innovation team, capable of making presentations with clean data that demystifies complex engineering studies in an easy-to-understand language for both the Head of Product Innovation, as well as leadership in the US and China. Consumer Insights – You will guide our design solutions by forming a complete picture of consumer needs and how new products will address these needs and create a delightful experience. Process Adherence – Our global IPD process, whilst continuously improving, is well understood and utilized by our teams in China. An important part of the role will be bringing a structured approach to projects to ensure seamless, accurate collaboration. Inspire – You will bring passion, creativity and drive to support a newly created team in product innovation across all of our consumer brands. What you bring to the role: Education - At least a Bachelor’s degree in a relevant Engineering discipline, a BSc/MSc in Industrial Design Engineering is strongly preferred. This is NOT an Industrial Design role. Experience - 10+ years in Consumer Product design and development for international markets. This MUST include significant experience in motorized and heated products in categories such as: power tools, blenders, vacuum cleaners, air purifiers, ovens, air fryers, etc. Strong working knowledge of electrical and electronic controls. Hands-on experience designing and developing world-class, successful products from idea creation to proof-of-concept validation rigs, to the point of hand-over for detail design and manufacturing. Leadership – Previous responsibility for multi-disciplinary, technical teams working locally in the US or abroad with suppliers. IoT – many of our products are connected by our Vesync app. A good understanding of the consumer experience this enables is critical to the role. Attention to detail – we don’t have time for a trial-and-error approach to design and development, we need to use intelligence and analysis to anticipate problems and get it right-first time. Market Experience – you will have a strong knowledge of the consumer product market in the US in some of our key categories with a deep understanding of brand and product value propositions. Resolve – The ability to listen carefully, ask questions, then understand sometimes complex issues and put forward a point-of-view on next steps is critical for success in this role. Salary Starting at $150,000 Annually Location Tustin, CA Perks and Benefits: 100% covered Medical/Dental/Vision insurances for employee AND spouse + dependents! 401K with 4% employer match (eligible after 90 days of employment) and immediate 100% vesting Generous PTO policy + paid holidays Life Insurance Voluntary Life Insurance Disability Insurance Critical Illness Coverage Accident Insurance Healthcare FSA Dependent Care FSA Travel Assistance Program Employee Assistance Program (EAP) Fully stocked kitchen

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Tool Design Engineer II . Under the direction of the Tool Design Manager, this position will be responsible for the development of conceptualized tooling solutions and creation of CAD models to support the tooling requirements for any given project. This position will develop technical solutions to problems with a moderate level of complexity. Most work will be performed without direction and will require regular use of ingenuity and creativity. This individual will work both independently as well as part of a team to complete specific projects related to the design and development of tooling solutions. ESSENTIAL JOB RESPONSIBILITIES The Tool Design Engineer II will utilize advanced experience and judgment to plan and accomplish goals in the following areas: Evaluates requirements to develop tool concepts. Develops complex tool and equipment specifications. Assists in the development of complex tool and equipment concepts and alternatives. Ability to manipulate data sets such as conceptual tool design models and deliverable designs. Will create and modify tool designs. Develops and implements alternative methods and interim solutions for damaged or unsafe tools and equipment to meet functional requirements. Participates in tool/equipment try-outs to ensure requirements have been satisfied. Evaluates and develops/revises preventative maintenance requirements for tools. Responds to requests for review and evaluates ability to produce proposed design with respect to forming, machining, and finishing by using in-house or supplier provided processes to support customer specifications. Assists in determining methodology for assembly of components and evaluates part-features required to support the proposed product. Investigates, develops, and verifies feasibility of tool concepts. Incorporates safety, ergonomic, and regulatory requirements in tool designs. Works well under general supervision. Performs other duties as required. EDUCATION AND EXPERIENCES Bachelor’s degree in a related engineering field is preferred and a minimum of 5-9 years of experience in the Aerospace Industry or related field or the equivalent in training, education and experience. Requires advanced knowledge of Unigraphics NX and/or CATIA V5 CAD Software and MS Office products. WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. 401(k) retirement savings plan with a percentage company-match contribution Competitive wages Paid holidays Paid time off Medical, dental, vision, life, and accidental insurance Short-term disability Long-term disability Employee assistance plan — for access to counseling, consulting, and other community resources Wellness program Tuition assistance Subject to eligibility, terms, and conditions Annual Salary Range = $80,480 - $134,040 This base pay range is specific to residents of California, Colorado, Connecticut, New Jersey, New York, Nevada, Ohio, Rhode Island, and Washington, and any other state that may require such disclosure. Compensation in other geographies may vary. This job description is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company’s online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at 636-916-2400 for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America‘s Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity /Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates (“LMI Aerospace”). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America d oes not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email info@sonaca-na.com .

Role:Oracle Integration Cloud Technical Specialist Client : DC government Location : Washington, D.C. (Hybrid - Once in every 2 weeks) Note : Tri-State area candidates preferred* Job Description : The Contractor personnel shall perform the following duties and responsibilities for the Oracle Integration Cloud Technical Specialist Level 1: a. Support the day-to-day operations, including help desk issues and end-user support. b. Design and development of Oracle integrations on OIC using file-based/REST/SOAP adapters. c. Develop and deliver on Oracle Integration Cloud-based integrations with Oracle SaaS and 3rd Party applications. d. Design, develop, unit testing, performance tuning and implementation of Real-time and Batch integration. e. Conceptualize technical design options, identify the best option, and complete the technical design specifications. f. Design and develop Webservices/APIs for cloud, on-premises, and hybrid solutions using Oracle Integration Cloud (OIC). g. Expertise in building, error handling, auditing, scheduling, deployment, monitoring/alert integrations in OIC/ICS, and support end-to-end testing of integrations. h. Thorough knowledge of Mapping, Lookups, Connections, XSLT, Agents, Packages, and other features of OIC. : Bachelor's Degree in Computer Science or related field or 10 years of experience in the Software field : a. At least 7 years of experience designing, developing, and testing of software applications b. 7+ years of experience with developing integration using Oracle SOA, OIC and other middleware suites c. End-to-end Oracle Integration Cloud (OIC) implementation experience with at least 1 end-to-end Oracle SaaS/PaaS/IaaS implementation project d. 3+ years of hands-on development and administration experience with technologies such as Oracle Integration Cloud (OIC) and Visual Builder Cloud Services (VBCS) in a SaaS environment e. 7+ years' experience with interfacing between Oracle Cloud or ERP and 3rd party systems f. Experience working with Oracle Cloud Infrastructure (OCI) preferred g. 3+ years of experience working with Oracle SaaS modules such as procurement, financials, and/or projects. h. Ability to leverage pre-built integrations, cloud adapters, connections, SaaS applications, etc. in the solution i. 3+ years of experience with REST, API, SOAP, FBDI, PL/SQL, and the use of Oracle Cloud-delivered Web Services j. Hands-on development experience with Oracle Database Cloud services (DBCS) and Managed File Transfer (MFT) k. Experience with Oracle Data Integrator is a plus Compensation: $70.00 - $75.00 per hour About Us AHU Technologies INC. is an IT consulting and permanent staffing firm that meets and exceeds the evolving IT service needs of leading corporations within the United States. We have been providing IT solutions to customers from different industry sectors, helping them control costs and release internal resources to focus on strategic issues. AHU Technologies INC. was co-founded by visionary young techno-commercial entrepreneurs who remain as our principal consultants. Maintaining working relationships with a cadre of other highly skilled independent consultants, we have a growing number of resources available for development projects. We are currently working on Various projects such as media entertainment, ERP Solutions, data warehousing, Web Applications, Telecommunications and medical to our clients all over the world.

If you need any assistance seeking a job opportunity at this company, or if you need reasonable accommodation with the application process, please call (513)360-0800 or contact us at great.careers@nuwaves.com. Employee Value Proposition: This position presents the opportunity to apply expertise in Radio Frequency (RF) and Microwave (MW) Engineering to support NuWaves’ primarily DoD projects, ultimately supporting the US Military. Opportunities exist within the Engineering domain and across the company to increase knowledge, grow leadership skills, and continuously improve the business system. General Summary: NuWaves, a premier supplier of RF and Microwave System and Subsystems, is actively seeking talented and highly motivated RF and MW Design Engineers with 2 to 6 years of experience in RF and Microwave circuit design to support Engineering Development. Individuals must have knowledge of RF/MW circuits that include power amplifiers through C-Band, RF upconverters and downconverters, RF filters, and low noise amplifiers. The ideal candidate will possess strong technical writing skills. Performance Objectives Work within an integrated product team assisting in the design of NuWaves’ product development. Lead the design of high-performance RF circuitry within 12 months. Write system and sub-system requirements of non-complex RF/MW systems. Capable of deriving the requirements within 18 months. Support the writing of technical proposals, status reports, whitepapers, and other technical papers within 4 months. Generate a working understanding of NuWaves’ business system within 60 days, with the goal of contributing to system improvements thereafter. This includes understanding the company strategy and working within NuWaves’ Quality Management System. Typical Education and Experience: Associate’s/Bachelor’s degree in Electrical Engineering (EE) or Electrical Engineering Technology (EET) or related field and 2-6 years RF design experience. U.S. Citizenship is a requirement. EOE disability/vet .

Fastsigns of El Cajon Graphic Designer/Production Specialist RESPONSIBILITIES: Prioritize the daily workflow for design and production. Manage the daily production meeting with all staff. Keep the installation calendar accurate and up to date. Read, understand, and execute the elements of the Electronic Work Order. Help co-workers and customers with file transfers, FTP access, photo library options, online proofs. Prepare art files according to the electronic work order using Adobe Illustrator, Adobe Photoshop, etc. Upload proofs to the Point of Sale software for approval. Locate photos, understand copyright laws and release/usage requirements, have knowledge of resources to buy stock images, work with vendors to create output beyond store capability, and understand resolution options. Operate the large format, full color printer, plotter, laminator, and application table, including loading and unloading materials, and ensuring the use of accurate settings. Maintain accurate electronic records. Maintain all equipment including computers, plotters, printers, laminators and production equipment. Efficiently use ink, media and laminates and other supplies. Keep a list of needed supplies to purchase. Prepare substrates for application, including cutting, laminating, painting etc. Learn and understand what good production skills look like. Apply these standards to all jobs in the production process. Weed excess vinyl from computer cut images. Be able to use multiple weeding techniques. Check the finished product, matching with the electronic work order as a final quality control check. Install signs using various tools and techniques as appropriate. Clean and maintain production/design/install areas. Ensure materials are stored in an organized manner. Budget your time to complete all work for the day. Perform computer back-ups; archive files as necessary. Answer the phone and assist customers as needed. Participate in and practice the brand ideal of “Everybody Sells”. Constantly be looking for sales opportunities for the center. Communicate with other staff members, customers, and vendors in a friendly, professional manner. Maintain skills, keep skills updated and current, and enhance education by attending training classes, webinars or using other training materials. Have a positive attitude. Be willing to learn and take on new challenges daily. Compensation: $18.00 per hour At FASTSIGNS, every day is unique and presents exciting opportunities, including new ways to use your talent and grow your skills. We have a large network of independently owned locations - both locally and internationally - who offer competitive pay and ongoing training opportunities. Are you ready to plan for your future? Discover your next career. Make your statement. Learn more by exploring the positions offered by FASTSIGNS centers. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to FASTSIGNS Corporate.

Closet Factory of New Jersey is currently looking for passionate, upbeat, professional salespeople with a great track record to join our growing sales team. This is a REMOTE POSITION. While our offices and showroom are located in Fanwood, NJ, we are currently focused on finding individuals who live in the MERCER, MIDDLESEX, or MONMOUTH areas to service the growing requests for appointments we are seeing in those counties. Your general service area would be within 40-50 minutes of your home. Closet Factory is a leader in the Custom Closet industry. Our national franchise organization has been rated #1 in our industry. For over 30 years, we have been creating truly custom solutions for every room in our clients’ homes. We design, manufacture, sell and install custom closets, home offices, garages, home theaters, wallbeds, pantries, bookshelves, wall beds and much more. We have the most extensive product line in our industry and are supported by excellent customer service. We have experienced substantial, long-term growth both in our organic business as well as our great and partnership with Costco. A s a result are searching for new designers to add to our close-knit team of individuals who design and sell our products directly to homeowners, builders, contractors, interior designers and architects. Our established brand and industry position coupled with a terrific product line will quickly place you in a position to succeed. And, your commitment to your personal development will ensure that success is not only sustainable, but consistently trending in an upward direction. We want employees who are creative and innovative as well as dedicated and disciplined in their approach to their jobs. We are a hard working company and are seeking to improve our performance with like-minded team players. Successful candidates should enjoy working with people and have the following characteristics: Have a schedule to take company-provided qualified leads AND prospect new business Able to develop and nurture long term relationships with clients Able to gain referrals and repeat business with existing client base Effectively network with associations and other groups Comfortable working in a competitive, fully-commissioned environment Possess solid selling, negotiation, and closing skills Have an interest in interior design and home organization Have excellent communication skills Are detail oriented – Have ability to space plan, visualize and measure a space Can work both independently and in teams We provide flexible working hours to fit most lifestyles. If you are a hardworking energetic sales professional who enjoys working with people, and have some experience in this area - this may be the opportunity for you. If this sounds interesting and exciting, please respond with your resume or fax us at 908-322-8574. Feel free to call us at 908-322-8270 if you need additional information or details. Call Today!! Job Benefits Include: Full Time Positions Best training in the industry Pre-set qualified leads Industry leading technology and support Excellent working environment and culture Flexible Schedule Top earners make over $100,000/yr Specific Requirements: 2+ years of Sales or Design Experience Home Improvement Related Sales Experience A+…but Not Necessary You Must Be Trainable/Coachable Basic Computer Skills If you are energetic and upbeat, this may be the place for you. We recognize people as our most valuable asset and will train you to excel in your position. A future with Closet Factory has never been brighter.

Work Flexibility: Not available What You Get Out of the Internship At Stryker, we believe that developing the next generation of talent is just as important as developing life-changing medical technologies. As an intern, you won't just observe - you'll contribute to meaningful projects, gain exposure to leaders who will mentor you, and experience a culture of innovation and teamwork that is shaping the future of healthcare. As an intern, you will: Apply classroom knowledge and gain experience in a fast-paced and growing industry setting Implement new ideas, be constantly challenged, and develop your skills Network with key/high-level stakeholders and leaders of the business Be a part of an innovative team and culture Experience documenting complex processes and presenting them in a clear format Who we want Challengers. People who seek out the hard projects and work to find just the right solutions. Teammates. Partners who listen to ideas, share thoughts and work together to move the business forward. Charismatic networkers. Relationship-savvy people who intentionally make connections with both internal partners and external contacts. Strategic thinkers. Interns who propose innovative ideas and consistently exceed their performance objectives. Customer-oriented achievers. Individuals with an unparalleled work ethic and customer-focused attitude who bring value to their partnerships. Game changers. Persistent interns who will stop at nothing to live out Stryker's mission to make healthcare better. What You Will Do Brief internship description: As a Mechanical Engineering Intern at Stryker, you will gain hands-on experience supporting product design within the Integration portfolio. In this role, you will contribute to thermal analysis of components and systems, create and refine mechanical designs using Solidworks, Ansys, etc. and perform tolerance stack-up analysis to ensure robust product performance. You will also assist in developing engineering drawings and prints that meet industry and company standards. Throughout your internship, you will collaborate with cross-functional teams, apply problem-solving skills to real-world challenges, and help drive innovation that improves patient outcomes. This internship will provide you with exposure to the full product development cycle, from concept through validation, while strengthening your technical, analytical, and communication skills in a fast-paced, team-oriented environment. Majors Targeted: Marketing, Business, Business Administration/Management, Communications What You Need Currently pursuing a Bachelor's or Master's degree in a related field; must remain enrolled in a degree-seeking program after the internship. Cumulative 3.0 GPA or above (verified at time of hire) Must be legally authorized to work in the U.S. and not require sponsorship now or in the future. Strong written and verbal communication skills, with proven ability to collaborate and build relationships Demonstrated leadership, problem-solving, and organizational skills with the ability to manage multiple priorities Proficiency in Microsoft Office (Excel, Word, PowerPoint) and eagerness to learn in a dynamic environment. Travel Percentage: None Stryker Corporation is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, ethnicity, color, religion, sex, gender identity, sexual orientation, national origin, disability, or protected veteran status. Stryker is an EO employer - M/F/Veteran/Disability. Stryker Corporation will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.