Auto-apply to these ui ux design jobs

Position Summary The Distribution Design Technician is any position from level one through senior level, with the training and experience to perform electric and gas engineering calculations, engineering design and layout, costing, and production of electric and gas construction plans and drawings for residential, retail, and commercial development projects. In addition, this position will express comprehension of GIS systems in general and will work closely with the Engineering GIS department to ensure the data accuracy and model functionality are correct within the GIS design, as it relates to the engineering design and layout. The Distribution Design Technician works closely with the Project Manager Supervisor to ensure a high level of competence, quality, and accuracy in preparing electric and gas designs, construction plans, bill of materials, and cost estimates. The placement level for this position is based on skill level which is assessed through the interview process. Primary Position Responsibilities Provides electric and gas designs by designing facilities according to CoServ design and construction standards and specifications. Adheres to other local codes and ordinances applicable to the job functions performed by this position and follows state and other regulatory agency procedures and rules in the performances of all work. Develops electric design and layout for single phase and three phase primary lines and electric equipment, devices, and services for large residential, commercial, retail, and industrial development projects. Develops gas design and layout for lateral, main and service lines, associated equipment, devices, and services for large residential, commercial, retail, and industrial development projects. Maintains working knowledge of how to create and maintain GIS data for electric and gas designs, using the GIS system tools, functions, editing practices and workflows. Determines size, type, quantity and physical placement of electric lines, equipment and devices including primary and secondary conductors, single phase and three phase transformers, metering, protective and sectionalizing devices, underground vaults, poles, and duct systems. Performs electrical and mechanical engineering calculations, prepares drawings and other documentation to support electrical and structural design. Evaluates existing engineering design specifications and translates them into a GIS data model. Prepares detailed construction plan sketches, drawings and bill of materials for electric and gas projects with detailed measurements and relative geographic features, specifying size, type and quantity of construction materials, specifying size, type, quantity and location/routing of conductors, appropriate gas facilities, equipment and devices, and specifying any other notes or details relevant to facilitate construction of the project in a timely and efficient manner and according to all applicable codes, and CoServ design and construction standards and specifications. Provides information and details for easements. Learns to work within the GIS system and acquire data for geospatial referencing from various sources. Analyzes data and digitizes maps within the GIS system using the proper coordinate system, graphical elements, and data units that will be compatible with CoServ’s electronic mapping system. Resolves design and construction issues by meeting and communicating with developer’s engineer and CoServ’s Engineering Project Manager concerning upcoming and in-progress projects, gathering information (other utilities designs, easements, site requirements, future plans, building size, ultimate use, and load data) from the developers for the most reliable, cost-effective design. Requires all designs to be in compliance with CoServ’s design and construction standards and specifications. Maintains professional and technical knowledge by developing and maintaining a thorough knowledge of: National Fuel Gas Code, 49 CFR Part 192, National Electric Safety Code, National Electric Code, Occupational Safety Health Administration, and other local codes and ordinances applicable to the job functions performed by this position. CoServ, Rural Utility Services, state and other regulatory agency procedures and rules in the performance of all work. AutoCAD, GIS, GPS, and other software systems, by attending power distribution conferences, training and other educational workshops and meetings appropriate to this position. Exhibits trainability in specific GIS tools in order to successfully build out the GIS data as it relates to electric and gas facilities. Complies with established CoServ safety and operating rules, procedures and guidelines including reporting unsafe practices to a supervisor. Complies with established CoServ Information Security Handbook, policies, procedures, and guidelines including reporting suspected information security incidents to Tech Support. Secondary Position Responsibilities Represents CoServ in a professional manner. Follows internal company procedures for forwarding records, documents and information to other departments and personnel. Receives training in CPR and first aid. Wears safety clothing and equipment such as hardhat, goggles, steel-toed shoes, etc. when at construction site, or other field locations as appropriate. Follows safe work practices, including the proper use of equipment, vehicles, tools, and job procedures, while always applying CoServ safety rules and procedures. Follows safe work practices by documenting and reporting deficiencies with equipment and procedures and taking corrective action to remedy those deficiencies. Follows safe work practices by completing Monthly Safety Training to stay abreast of CoServ’s current safety practices and procedures. Attends CoServ University required training. Performs other duties and activities as directed. Supervisory Responsibilities None Education and Certifications Required High School Diploma or G.E.D equivalency. 2 year Associates Degree or equivalent Engineering, Geography or GIS experience. First Aid/ CPR or ability to obtain. Education and Certifications Preferred Bachelor’s degree in Engineering, Geography or GIS or equivalent experience. Certified in ESRI software and/or other training related to GIS. Basic knowledge of National Fuel Gas Code, 49 CFR Part 192, National Electric Safety Code (NESC), National Electric Code (NEC), and Occupational Safety and Health Administration (OSHA) Training. Proficient in ESRI ArcGIS products: ArcMap, ArcCatalog, ArcServer, ArcView, ArcReader, ArcFM, Designer, Responder, or other GIS systems as well as AutoCAD or related systems. Willingness to obtain certification/training in opening energized equipment for engineering purposes. Fundamentals of Electricity 1 Experience Required 1-2 years of verifiable GIS experience. 1 year of experience with ESRI Software. Experience Preferred 1 year of experience with Schneider ArcFM software. 5 years of experience in the engineering field. Experience in an electric and gas utility environment. Experience with IMB’s Maximo Application Suite. Skills and Abilities Required Understands basic GIS principles and practices. Ability to enter data quickly, correctly, and efficiently. Understands and follows maps, system maps, grid map and line design books and manuals. Ability to follow rules in employee handbook. Excellent interpersonal and communication skills. Must be self-motivated, take ownership of job responsibilities, and be proactive in seeking solutions for the department. Able to work both in a team or independently when required. Comfortable with working repetitive processes. Strong attention to detail. Able to adapt and contribute to shifting policies. Strong investigative and problem-solving skills. Proficiency in using Microsoft Office software (Word, Excel, etc.) Skills and Abilities Preferred Proficiency in layout and design of electric and gas facilities for residential, multifamily and commercial projects. Knowledge of Electric and Gas distribution systems. Physical Requirements Indoor, office environment. Ability to sit for extended hours. Works extended hours as needed or directed. Ability to lift a minimum of 25 pounds. Ability to drive as needed. Occasional outdoor work in areas with possible exposure to poison oak, poison ivy, and insect stings. Other Requirements Must have and maintain a valid Texas driver's license.

Mid-Level Design and Analysis Engineer Company: The Boeing Company The Boeing Company's, Boeing Global Services (BGS) Central Maintenance Computing (CMCS) and Management System (MMS) teams in St. Louis, Missouri has immediate and exciting opportunities for Experienced Mid-Level System Design Electrical Engineers to support Boeing Defense, Space & Security (BDS) Air Dominance programs . The electrical design work will be in support of developing maintenance equipment to include connections between equipment and aircraft subsystems, network infrastructure, and computing hardware supporting instrumentation and network system connections. Additionally, the engineer will provide support for fabrication, installation/connection, and required verification to deliver a ready-for-test setup. The equipment and software for the CMCS and MMS is used to support all phases of platform/weapon development: demonstration, production, field support, and repair. This individual will work in a team environment to develop test and repair the hardware design for the CMCS and MMS systems. A System Design Electrical Engineer in this role works with customers to develop and document complex electronic and electrical system requirements, and then analyzes and translates requirements into system, hardware and software designs and interface specifications. A System Design Electrical Engineer also performs tests and validations to ensure system designs meet operational and functional requirements, as well as monitors supplier performance to ensure system integration and compliance with requirements. A System Design Electrical Engineers solves problems concerning other support of fielded hardware and software over the entire product lifecycle, while researching specific technology advances for potential application to company business needs. Position Responsibilities Hardware/software integration Project lead activities for small projects, including customer interaction and basic Earned Value Management Researching basic technologies for potential application to company business needs Design and documentation of electrical systems, components, connections, and interfaces System schematic analysis and design System requirements analysis and development System selloff/verification System test requirements analysis and development interface design Test software analysis Outline electrical wiring required to adapt to test articles & subassemblies Support of lab or flight test instrumentation and data acquisition Selection of electrical hardware (cables, connectors, shielding, terminal blocks, etc.) Installation support and direction to lab test personnel Support of problem resolution associated with fielded hardware and software over the entire product lifecycle: hardware inspection, check-out, and test execution Utilize Model-Based Systems Engineering (MBSE) tools such as DOORS, Cameo, and mathematical modeling and simulation to develop system definitions/architectures and perform trade studies (includes integration with interfacing engineering disciplines model-based design toolsets) Support the execution of all aspects of Systems Engineering throughout the full program lifecycle (concept definition, design, test, and production), using model-based systems engineering (MBSE) methods Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science Experience with system requirements analysis, schematic design, and hardware/software integration Preferred Qualifications (Desired Skills/Experience): Experience or knowledge of RS422/RS232, PC104, TCP/IP & Ethernet, IEEE-488, MMSI, and MIL-STD-1553 communication standards, protocols and/or interfaces Experience or knowledge of cyber security principals or cyber certifications Experience or knowledge of network design Experience or knowledge of common military standards used in hardware design and testing (MIL-STD-810, MIL-STD-461, MIL-STD-1472, etc.) Experience with implementation and maintenance of systems engineering tools, schedules and metrics (i.e. DOORs, CAMEO, earned value management). Experience with Model Based Systems Engineering (MBSE) Experience with product/systems development and integration Technical system domain knowledge (e.g. air vehicle and/or weapons) CompTia Security + Certification Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $96,050 – $129,950 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

WHO WE ARE: Headquartered in Grand Rapids, Michigan since 1955, Lumbermen’s operates in Michigan, Ohio, Indiana, Kentucky, and Minnesota. A leading distributor and manufacturer, we are driven by our mission to enrich lives by intentionally caring for all who experience us. We are employee owned, and relationship powered . POSITION SUMMARY: As a Cabinet and Design Specialist, you will play a key role in designing innovative kitchen layouts, performing takeoffs for multifamily projects, conducting virtual cabinet training, and offering technical support to our network of dealers. You will also collaborate with our sales team, ensuring a seamless and high-quality experience for our customers. Design Kitchen Layouts : Use 2020 Design Software to create functional, kitchen designs that meet customer specifications. Takeoffs for Multifamily Projects : Perform detailed takeoffs for multifamily projects, ensuring precise measurements and cabinetry specifications are met. Cabinet Training : Conduct virtual cabinet training sessions for dealers, providing guidance on product features and design practices. Field Training : Assist with training new designers hired by our dealers on Lumbermen’s cabinet lines at dealer locations. Dealer Support : Assist our network of kitchen & bath retailers and lumberyards by providing advice on kitchen designs, cabinetry options, and technical product questions. Sales Team Assistance : Support the sales team with cabinet-related expertise, helping them address customer inquiries and secure sales. Newsletters : Coming up with content for Lumbermen’s Marketing team to use in newsletters. Technical Expertise : Stay updated on industry trends, product innovations, and software advancements, applying that knowledge to all design projects and customer interactions. Product Show : Design show layout and displays for Lumbermen’s Product Show. REQUIRED EDUCATION/EXPERIENCE Proficiency in 2020 Design Software (required). REQUIRED SKILLS Strong knowledge of cabinetry and kitchen design principles. Ability to read and interpret technical drawings and blueprints. Excellent communication and interpersonal skills. Strong organizational skills. Strong presentation skills. Strong attention to detail and problem-solving abilities. Ability to work both independently and collaboratively in a team-oriented environment. WHAT WE OFFER: Lumbermen’s exists to enrich the lives of people by intentionally caring for all who experience us. You will experience a different kind of work environment and “family” here and help live out the Lumbermen’s promises of committing to those who count on us , doing what’s right , exercising sound business practices and earning consideration . Other benefits include: A collaborative and supportive work environment ESOP ( Employee Stock Ownership Plan ) – generous company-funded retirement Medical, dental, vision, and life insurance Flexible spending/health savings account 401(k) The SOURCE – free and confidential support resources for our team Paid time off Paid holidays Training and development Advancement opportunities Lumbermen’s is proud to be a drug and alcohol-free workplace. In addition, Lumbermen’s will not discriminate against any employee or candidate because of race, color, religion, sex, age, national origin, sexual orientation, gender identity, disability or protected veteran status. We participate in E-Verify.

1st Shift: 6am-4pm Mon-Thurs Salary Range: 65k-85k ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Position requires sound comprehensive knowledge of design and drafting techniques, engineering drawing, CAD/graphics, computer model work, and reading of drawings. Develops designs for complete and complex engineering schematics for electrical, air plumbing, and hydraulic systems for over the road equipment. Develops designs for complete and complex engineering systems and structures. Responsible for structuring the Bills of Material for Assemblies and entering them into the MRP system. Collects, reads, interprets, and uses related reference documents and drawings prepared by other disciplines, vendors, or outside sources. Ensures compliance with approved design standards to provide quality design, safety, constructability, reliable operation, construction economy, and operating convenience. Reviews and checks calculations, design models, drawings and design documents for quality, accuracy, neatness, functionality, and satisfactory completion. Provide drawing for own designs and produce sketches to incorporate in drawings by Designers and Drafters. Research design options. Review shop drawings. Research code issues and ask general questions of code officials. Assure that drawings and designs are in accordance with company production and design standards. Ability to work overtime and/or weekends to meet tight deadlines. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Bachelor degree in an engineering or scientific discipline; or Specialized in Electrical, Air Plumbing, and Hydraulic Systems for heavy over the road equipment. Specialized courses in drafting, design and engineering practices, and four years of experience; or Equivalent combination of education, training and experience. Intermediate to Advanced skills using SolidWorks. Knowledge of trailer industry and regulatory standards and codes a plus. Firm understanding of MRP systems required. Experience in working with multiple discipline projects. Excellent computer skills in Microsoft Suite. PHYSICAL DEMANDS: The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Ability to sit, stand and walk for long periods throughout the day Ability to lift up to 40 lbs. WORK ENVIRONMENT: The work environment characteristics described herein are representative of those an employee encounters while performing the essential functions of this job. Work is primarily conducted in a normal office setting. Some work is conducted in a warehouse and/or shop floor environment with noise, dust, operating machinery and high traffic volume. *Not open to recruiters*

Responsible for, but not limited to, work on all product stages from research and development to design and manufacture of positive displacement power sections for downhole oilfield use. Relocation to Commerce, Georgia may be provided for qualified candidates. ESSENTIAL DUTIES include the following: Adheres to both RPC and Thru Tubing Solutions policies and procedures. Adheres to both industry and company safety policies. Maintains personal safety training at 90% with a goal of 100%. Design of new power sections. Failure analysis and product improvement. Elastomer analysis and development. Manufacturing process planning and optimization. Programming tasks associated with machine tool operation. Quality/Safety management of products and manufacturing processes. Other duties as assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements below are representative of the knowledge, skill and/ or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPETENCIES: Education/Experience CAD/CAM proficiency (Preferably SolidWorks) At least five years experience working in the area of power section design and manufacturing. Language Skills Must be able to speak, read and write English well enough to read technical documents and effectively communicate with team members. Computer Skills Must be able to use a Windows-based personal computer. Proficient in Microsoft Office. Proficient with advanced technical software. PHYSICAL REQUIREMENTS: This position may be required to complete a functional test quantifying the physical requirements for the essential functions of the position. Employee must be physically able to perform all essential job functions required in this position, with or without a reasonable accommodation. While performing the essential functions of this position, the employee is regularly required to sit, walk, stand, reach, climb, balance, stoop, kneel, crouch, crawl, hear, talk and smell. Must be able to lift up to 50 pounds. May be required to wear or use a respirator. OTHER QUALIFICATONS: Maintains a safe driving record and avoiding any at-fault or preventable accidents. Complies with all Company Quality Management System Standards, Policies, Procedures and Work Instructions. Performs all work in accordance with established RPC and Company specific Policies, Procedures and Work Instructions. Performs duties within established standards and customer requirements. May work in an office, shop or warehouse environment. May be required to work a flexible schedule including weekends, holidays and evenings. May be required to work outside assigned District location to support internal and external customers. FLSA Status: Exempt DOT Status: Equal Opportunity Employer

Mechanical Design Technician Job Description As a person, you’re a learner – a natural leader – someone who is always taking initiative to make things better and bring others along with you. You live your life in alignment with the highest values of integrity and quality, always ensuring your responsibilities become a long-term success story. In this role, you’ll help us deliver better care for billions of people around the world. It starts with YOU. As the Mechanical Engineering Technician at our Kimtech Plant in Neenah, Wisconsin you will work as part of an engineering team creating product & process designs necessary to meet our ever-changing market requirements. This position supports the design, development, and optimization of our manufacturing and product testing equipment systems globally as well as supporting other projects as business needs dictate. Travel to our suppliers and manufacturing sites, largely in North America, is appropriate based on project specific needs. In this role, you will: Provide mechanical design and detailing in support of team/ business objectives. Layout of manufacturing and supporting processes. Participate in equipment/ process checkouts and/ or machine start-ups to validate machine designs Ability to recognize, define, and resolve technical problems. Provide application of engineering standards and procedures. Continue development of knowledge and skills to be recognized as a designer and developer. Carry out job responsibilities in a safe manner. Design equipment and processes that meet safety codes, policies, and guidelines. Provide for the safety and well­being of operators, maintenance, and other personnel. Maintain security and documentation to ensure retrieval of data and protection of proprietary information Travel up to 15% About Us Huggies®. Kleenex®. Cottonelle®. Scott®. Kotex®. Poise®. Depend®. Kimberly-Clark Professional®. You already know our legendary brands—and so does the rest of the world. In fact, millions of people use Kimberly-Clark products every day. We know these amazing Kimberly-Clark products wouldn’t exist without talented professionals, like you. At Kimberly-Clark, you’ll be part of the best team committed to driving innovation, growth and impact. We’re founded on more than 150 years of market leadership, and we’re always looking for new and better ways to perform – so there’s your open door of opportunity. It’s all here for you at Kimberly-Clark. Led by Purpose. Driven by You. About You You perform at the highest level possible, and you appreciate a performance culture fueled by authentic caring. You want to be part of a company actively dedicated to sustainability, inclusion, wellbeing, and career development. You love what you do, especially when the work you do makes a difference. At Kimberly-Clark, we’re constantly exploring new ideas on how, when, and where we can best achieve results. When you join our team, you’ll experience Flex That Works: flexible (hybrid) work arrangements that empower you to have purposeful time in the office and partner with your leader to make flexibility work for both you and the business. In one of our manufacturing roles, you’ll focus on winning with consumers and the market, while putting safety, mutual respect, and human dignity at the center. To succeed in this role, you will need the following qualifications: A two-year technical Associate Degree in Mechanical Design Technology, Electro-Mechanical Technology, Machine Design, or other technical area of specialization or equivalent engineering experience and more than 1 year of experience Proficient at designing in Solid Works and AutoCAD Demonstrated competency in the use of engineering systems/tools. Demonstrated competency in innovative mechanical design Effective communication skills, both oral and written, and the ability to interact with customers, cross functional team members, and outside suppliers. Ability to apply engineering principles, standards, and procedures in the execution of projects and programs to advance process innovation. Demonstrated ability to accomplish tasks independently, while functioning in a team environment, to complete projects within required timeframe and budget Accuracy and attention to detail. Total Benefits Here are just a few of the benefits you’d enjoy working in this role for Kimberly-Clark. For a complete overview, see www.mykcbenefits.com . Great support for good health with medical, dental, and vision coverage options with no waiting periods or pre-existing condition restrictions. Access to an on-site fitness center, occupational health nurse, and allowances for high-quality safety equipment. Flexible Savings and spending accounts to maximize health care options and stretch dollars when caring for yourself or dependents. Diverse income protection insurance options to protect yourself and your family in case of illness, injury, or other unexpected events. Additional programs and support to continue your education, adopt a child, relocate, or even find temporary childcare. To Be Considered Click the Apply button and complete the online application process. A member of our recruiting team will review your application and follow up if you seem like a great fit for this role. In the meantime, please check out the careers website . And finally, the fine print…. For Kimberly-Clark to grow and prosper, we must be an inclusive organization that applies the diverse experiences and passions of its team members to brands that make life better for people all around the world. We actively seek to build a workforce that reflects the experiences of our consumers. When you bring your original thinking to Kimberly-Clark, you fuel the continued success of our enterprise. We are a committed equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, age, pregnancy, genetic information, citizenship status, or any other characteristic protected by law. The statements above are intended to describe the general nature and level of work performed by employees assigned to this classification. Statements are not intended to be construed as an exhaustive list of all duties, responsibilities and skills required for this position. Employment is subject to verification of pre-screening tests, which may include drug screening, background check, and DMV check. Veterans and members of the Reserve and Guard are highly encouraged to apply. Salary Range: $58,000 - $68,000 USD At Kimberly-Clark, pay is just one aspect of our total rewards package, which also includes a variety of benefits and opportunities to achieve, thrive and grow. Along with base pay, this position is eligible for overtime pay and a comprehensive benefits suite, including our 401(k) and Profit-Sharing plan. The anticipated base pay range for this role is provided above for a fully qualified hire. Actual pay will depend on several factors, such as location, role, skills, performance, and experience. Please note that the stated pay range applies to US locations only. This role is available for local candidates already authorized to work in the role’s country only. Kimberly-Clark will not provide relocation support for this role. #LI-Onsite Salary Range: 57,640 – 68,120 USD At Kimberly-Clark, pay is just one aspect of our total rewards package, which also includes a variety of benefits and opportunities to achieve, thrive and grow. Along with base pay, this position is eligible for overtime pay and a comprehensive benefits suite, including our 401(k) and Profit Sharing plan. The anticipated base pay range for this role is provided above for a fully qualified hire. Actual pay will depend on several factors, such as location, role, skills, performance, and experience. Please note that the stated pay range applies to US locations only. Primary Location Neenah - Kimtech Plant Additional Locations Worker Type Employee Worker Sub-Type Regular Time Type Full time

Join a Leader in the Construction Industry – UFP Site Built is Hiring an Entry-Level Designer/Estimator At UFP Site Built , we pride ourselves on being at the forefront of designing and manufacturing innovative wood and non-wood products for the construction industry. As a leader in the field, we specialize in a variety of wood structural components, aluminum decks and rails, and light gauge steel structural components. We’re excited to announce a unique opportunity for an Entry-Level Designer/Estimator . If you’re passionate about design, problem-solving, and contributing to the construction industry, this role could be the perfect fit! Candidates can potentially work out of one of the following 4 locations: Chicopee, MA Berlin, NJ Auburn, NY New Windsor, MD Ideal candidates must be willing to train initially in Burlington, North Carolina for our June Design Trainee Class for 4 weeks (company will cover all costs - training is paid). What You'll Do: Get hands-on experience designing roof trusses, floor trusses, wall panels, and engineered wood products (EWP) for residential and commercial projects. Work with cutting-edge software (MiTek) to prepare bids, layouts, and engineered profiles. Collaborate with experienced professionals in a supportive team environment to ensure customers' needs are met and design solutions are offered. Develop your skills through paid, comprehensive training in Burlington, North Carolina (January Design Trainee Class – 4-6 weeks, with all travel and accommodation covered). Grow within the company , with opportunities for continued learning and advancement in the design and construction fields. Build strong relationships with retail clients, builders, framers, and developers to answer design questions and deliver top-tier service. Be part of a dynamic team that values creativity, problem-solving, and teamwork . What We’re Looking For: Background in drafting, CAD, construction, or framing is highly preferred. Detail-oriented with strong mathematical and analytical skills – comfortable working with blueprints and calculating loads. Ability to work independently, manage multiple tasks , and meet deadlines. Excellent communication skills and a passion for delivering exceptional customer service. A willingness to learn and grow within a supportive, collaborative team. Why UFP Site Built? Paid Training : Full company-paid 4-week training in our Burlington, NC location with travel and accommodation covered. Comprehensive Benefits : Hourly Pay: $19-20 per hour plus Medical, dental, vision, disability insurance, 401(k) with company match, and more. Work-Life Balance : Paid vacation, holidays, and wellness programs. Professional Growth : Educational reimbursement and career advancement opportunities. Employee Stock Purchase Program : Get access to discounted stock options. Company Culture : Join a team that values collaboration, innovation, and continuous development. Ready to Build a Career with Us? Apply today and start your journey at UFP Site Built, where your career growth is a priority! The Company is an Equal Opportunity Employer.

Are you a skilled technical professional with a passion for precision and innovation? We have an exciting opportunity for a Senior Tool Designer to join our dynamic team. In this role, you will play a crucial part in creating cutting-edge production, engineering, and developmental tools. If you have a strong background in Computer-Aided Design (CAD) and are eager to apply your expertise to real-world challenges, we want to hear from you! Key Responsibilities: Design Excellence: Utilize your expertise in reading and interpreting conceptual designs, blueprints, and engineering orders to create precise tool designs. Make use of computer-based design systems to bring your ideas to life. Mathematical Prowess: Apply your mathematical skills, including geometric and trigonometric formulas, to calculate dimensions, angles, and machining guidelines, ensuring precision in tool design. Material Mastery: Leverage your knowledge of various metals, plastics, ceramics, and composite materials to design tools tailored to their unique properties and machining characteristics. Collaborative Spirit: Coordinate with Tool Engineers to meet tool requisitions, implement design changes, and ensure modifications align with requirements. Empowerment Through Communication: Assist shop personnel in understanding your tool design drawings, fostering effective collaboration. Data Management: Maintain accurate manufacturing data and statistics, either manually or through computer-based systems. Required Skills and Qualifications: Technical Background: Hold a technical degree (e.g., BS or AS) or have commensurate years of experience in a relevant discipline 5 Plus years working in relevant Field with Tools such as NX CAD Proficiency: Demonstrate proficiency in Computer-Aided Design (CAD) and modeling skills, particularly using NX. Blueprint Interpretation: Read and interpret engineering documents, sketches, blueprints, and verbal discussions to translate concepts into precise designs. GD&T Expertise: Apply your knowledge of Geometric Dimensioning and Tolerance (GD&T) to support tool fixture design and fabrication processes. Machining Know-How: Apply machining theory, best practices, and mechanical systems knowledge to design tooling for turbomachinery repair and manufacturing. Tolerance Mastery: Have a complete understanding of product tolerance stack-ups and datum structures in the context of designing tooling fixtures. Mathematical Acumen: Possess excellent math skills, including proficiency in trigonometry. Safety First: Exhibit a commitment to safety values and comply with factory process safety rules and requirements. Communication Skills: Have excellent verbal and written communication skills to facilitate effective collaboration. Deadline-Driven: Demonstrate the ability to meet deadlines, work under time constraints, and handle multiple tasks simultaneously. Team Player: Collaborate effectively with colleagues at all levels and contribute positively to team dynamics. Adaptability: Thrive in a fast-paced, creative environment and embrace the diversity of experiences within dynamic teams. Citizenship: Must be a U.S. Citizen and possess or ability to get DOD clearance.#cj Additional Skills: Independent Contributor: Effectively contribute to and perform within a team while also possessing the capability to work independently with minimal supervision. Legacy Tooling Upgrades: Ability to review, interpret, and upgrade heritage/legacy tooling designs to modern standards, applications, and practices. Budget Adherence: Discuss, comprehend, and adhere to established or agreed-upon budgets for tooling design (models and drawings). Physical Requirements & Work Environment: Mostly Office Environments, Occasional Shop Floor involvement. Substantial amounts of telephone, video conferencing and computer work. Heavily Regulated Industries with strict adherence to procedures. Flexibility to meet business deadlines by staying late or arriving early. Typical 8 hour days plus lunch / 40 hour weeks / core (required) hours are 9AM to 4PM Ability to use personal transportation to visit customer locations. Due to the nature of the work, all candidates must be a U.S. Citizen The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions If you're ready to take on exciting challenges, apply your expertise to shape the future of tool design, and be a part of a dynamic and fun-loving team, we encourage you to apply! Join us in making a difference through precision and innovation We look forward to having you join the journey! Full compensation package is based on candidate experience and certifications Pay Ranges $85,000 — $105,000 USD At Quest Defense Systems and Solutions , we don’t just build technology — we engineer the future. From next-generation aerospace solutions to cutting-edge defense systems, we tackle the toughest, mission-critical challenges that keep people safe and push the boundaries of innovation. This is where problem-solvers, innovators, and visionary thinkers come together to shape the future. With over 25 years of aerospace and defense engineering expertise, our commitment to delivering high-quality, transformative solutions sets us apart — not just as an industry leader, but as a driving force for impactful change. Together, we’re not just leading the industry — we’re revolutionizing it. Quest Defense provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

RFA Engineering ( www.rfamec.com ) is an engineering service provider dedicated to delivering our clients with timely engineering support and expertise. We are seeking entry-level to experienced candidates to become an integral part of our engineering team. The selected candidates will work with an experienced engineering staff using state-of-the-art engineering tools & processes. This position will operate onsite at our customer's world-class engineering and manufacturing facility located near Green Bay, WI. This is a full-time position with a full benefit package listed below that includes opportunities for professional growth, direct hire by our customers, and additional opportunities within our own organization. Design Engineer Mechanical Design Engineer will be responsible for the concept and development of structural, electrical, and hydraulic components. Key responsibilities include creating CAD models and design documentation, and collaborating with suppliers, manufacturing, and validation teams to optimize designs. Job Description Support the design and development of structural, electrical and hydraulic components. Conduct design reviews of new prototype components and systems. Document all design activity with CAD models, design drawings, analysis results, and design review presentation materials. Provide information and visit prototype component suppliers as necessary. Review continuous improvement cycles of production vehicles and warranty improvement based on customer and factory feedback. Work with manufacturing, product verification and validation, and suppliers to develop efficient and cost-effective designs. Use CAD Software to assist in the 3-D Modeling of components, sheet metal and possibly hydraulic & electrical routings, including light analysis of structural components. Prepare CAD models appropriate for more detailed analysis as necessary (i.e. finite element analysis (FEA). Requirements BS Degree in Mechanical Engineering or related field. Proficiency in engineering principles including but not limited to structural mechanics, hydraulics, and electronics. Proficiency in 3D CAD - (Solid Works preferred). Knowledge of typical engineering standards in drawing practice, dimensioning and tolerancing, drawing symbols, welding practice, etc. Prior experience with off-road equipment Pay Range: $65,000-$95,000 – Commensurate with experience Competitive Benefits Health and Dental Insurance Health Savings Account TelaDoc: Virtual Health Care Vision Insurance Company Paid / Supplemental Life Insurance Company Paid Long-Term Disability Supplemental Short-Term Disability Retirement Savings Account (Traditional 401k & Roth 401k) Flexible Spending Plan Dependent Care Bonus Plan (Exempt Employees Only) Paid Time Off (PTO) Paid Holidays Bereavement Leave Employee Assistance Programs (EAP) Education Assistance About RFA Engineering RFA Engineering has provided product development and engineering services to industry leading customers since 1943. Our primary focus is the development of off highway equipment including agricultural, construction, mining, recreational, industrial, and special machines. Our work includes concept development, product design, documentation, problem-solving, simulation, optimization, and testing of components, systems and complete machines. Our engineering staff is located at our Engineering Center in Minneapolis, branch office in Dubuque, IA, and at numerous customer sites throughout the U.S.

Pay Range $17.50 - $21.30 Purpose: The Design Consultant at Floor & Decor is the entry point into design and is responsible for engaging customers on the sales floor to support their design projects, conduct design appointments with customers to determine design needs in the selection of tile, wood, stone, and accessory products of various colors textures, patterns, and design. The Design Consultant will also partner with store leaders to maximize sales goals and expand the design services brand. Minimum Eligibility Requirements 1+ years of retail/customer service experience High school diploma and or GED Proficient in basic mathematical skills Must be self-motivated and able to multi-task in a fast-paced environment Basic computer knowledge, including Microsoft Office suite Internal candidates a minimum of 6 months with Floor and Decor Essential Functions Greet store customers in a helpful manner and supports store design walk-in needs Schedule design appointments for existing and potential customers, while developing clientele through networking and referrals, as well as leads generated within the store Providing tile, wood, stone and accessories advice to homeowners, interior designers, and builders for both residential and commercial projects. Design and sell complete, functional and aesthetically appealing solutions Manage multiple, simultaneous customer projects through all phases with a high level of accuracy, timeliness and follow-up including consistent and concise communication to customers and others. Proficient and consistent use of company communication tools and emails are required Collaborate, partner and communicate with store leadership and employees to manage projects from inquiry to installation, and achieve sales and other goals Enthusiastically support all company initiatives and goals by modeling and coaching best practices with store employees Responsible for understanding and utilizing design applications i.e.; Salesforce, proprietary Online Design Appointment Scheduler, and MyProject Perform other duties as assigned Working Conditions (travel, hours, environment) Limited travel may be required by car While performing the duties of this job, the employee is frequently exposed to a warehouse environment and moving vehicles. The noise level in the work environment is typically moderate to noisy. Physical/Sensory Requirements Medium Work – Ability to exert 20-50 pounds of force occasionally, and/or 10-25 pounds of force frequently, and/or greater than negligible up to 10 pounds of force constantly to lift, carry, push, pull, or otherwise move objects. The employee is often required to use their hands and fingers, to handle or feel. The employee is occasionally required to stand, walk, reach with arms and hands, climb or balance, and to stoop, kneel, crouch or crawl. Additional Essential Job Functions Maintain the integrity of the Company’s business operations and reputation as well as compliance with its policies and procedures, including the handling of confidential information, currency, and other forms of payment. Contribute to a safe and secure work environment for our associates, customers, other third-parties with which we do business, and Company property. Qualified applicants with criminal histories, such as arrest or conviction records, will be considered for employment in accordance with the L os Angeles County Fair Chance Initiative for Hiring Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable law Store Hours Monday - Friday 7:00 AM - 8:00 PM Saturday 8:00 AM - 7:00 PM Sunday 10:00 AM - 6:00 PM Pickup Hours Monday - Friday 7:00 AM - 7:00 PM Saturday 8:00 AM - 7:00 PM Sunday 10:00 AM - 6:00 PM Benefits & Rewards Bonus opportunities at every level Career advancement opportunities Relocation opportunities across the country 401k with discretionary company match Employee Stock Purchase Plan Referral Bonus Program A personal holiday and Volunteer Time Off program Medical, Dental, Vision, Life and other Insurance Plans (subject to eligibility criteria) Equal Employment Opportunity Floor & Decor provides equal employment opportunities to all associates and applicants without regard to age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, disability, veteran status, genetic information, ethnicity, citizenship, or any other category protected by law. This policy applies to all areas of employment, including recruitment, testing, screening, hiring, selection for training, upgrading, transfer, demotion, layoff, discipline, termination, compensation, benefits and all other privileges, terms and conditions of employment. This policy and the law prohibit employment discrimination against any associate or applicant on the basis of any legally protected status outlined above.

CAN/LAN Network Design Lead Job Category: Information Technology Time Type: Full time Minimum Clearance Required to Start: TS/SCI with Polygraph Employee Type: Regular Percentage of Travel Required: Up to 10% Type of Travel: Local Anticipated Posting End: 1/26/2026 The Opportunity: Team CACI has an exciting and challenging opportunity available for a Network Designer supporting an Intelligence Community customer’s campus-area (CAN) and local-area (LAN) networks across multiple security domains. This position encompasses the design, implementation, and maintenance of complex, global enterprise networks. The Senior Network Designer will act as a key technical leader, driving the evolution of our network infrastructure to meet evolving business needs. This includes not only maintaining network stability and performance but also proactively engineering solutions to address new customer requirements and emerging technologies. Responsibilities include troubleshooting network incidents, collaborating with junior engineers, and remaining abreast of the latest advancements in networking. This role demands a strong foundation in networking principles, extensive experience with routing protocols (including BGP), hands-on expertise with cloud networking platforms, and a proven ability to translate business needs into robust network solutions. Responsibilities: Oversee the CAN/LAN engineering team providing advanced technical support for complex CAN/LAN network issues while aligning with the strategic overall network design. Work with architects and engineers to design, implement, and maintain CAN/LAN network solutions tailored to organizational needs, while working closely with other network teams to ensure seamless operations including the WAN Team, Firewall Team, and Network Management Team. Design, configure, and optimize CAN/LAN network architectures, ensuring high availability, scalability, and performance. Provide Tier 3 technical support for CAN/LAN infrastructure, including troubleshooting, configuration, and resolution of complex network issues. Respond to escalated service tickets and resolve issues in a timely manner, ensuring minimal disruption to operations and transparent communication with customers and stakeholders. Analyze and resolve network performance issues such as latency, bandwidth bottlenecks, and packet loss. Troubleshoot, maintain integrity, and configure network components along with implementing operating systems enhancements to improve reliability and performance Supports hardware infrastructure site surveys, planning, design, and installation of equipment and cabling to support projects and standard service requests. Provide transition planning and support services that accelerate delivery timelines, reduce operational risk and ensure service continuity during transition including migration of users from existing service platforms to new service offerings and transition of services into operations Work independently and as part of integrated teams and apply advanced concepts and processes to daily activities. Maintain documentation for network configurations, procedures, and incidents to ensure compliance with best practices and industry standards. Provide mentoring and knowledge transfer to junior network engineers and technicians. Stay updated on emerging network technologies, trends, and security threats to continuously improve network infrastructure. Provide afterhours call in support for CAN/LAN services. Support deployable networks for multiple mission partners to include travel to CONUS sites for deployments, installations, and maintenance. Qualifications: TS/SCI with Poly required Bachelor’s Degree in a Technical Field. Equivalent work experience may be considered Minimum 10 years’ experience of related work experience Excellent communication and interpersonal skills to collaborate across multiple teams and departments. DoD 8140.01 and 8570.01-M, IAT II required Strong expertise in routing and switching protocols (e.g., OSPF, BGP, VLAN, Spanning Tree Protocol, etc.). Advanced knowledge of network protocols, TCP/IP, and related technologies. In-depth knowledge of network hardware (routers, switches). Certifications such as JNCIP, CCNP, CCIE, or similar are highly preferred - ________________________________________________________________________________________ What You Can Expect: A culture of integrity. At CACI, we place character and innovation at the center of everything we do. As a valued team member, you’ll be part of a high-performing group dedicated to our customer’s missions and driven by a higher purpose – to ensure the safety of our nation. An environment of trust. CACI values the unique contributions that every employee brings to our company and our customers - every day. You’ll have the autonomy to take the time you need through a unique flexible time off benefit and have access to robust learning resources to make your ambitions a reality. A focus on continuous growth. Together, we will advance our nation's most critical missions, build on our lengthy track record of business success, and find opportunities to break new ground — in your career and in our legacy. Your potential is limitless. So is ours. Learn more about CACI here. ________________________________________________________________________________________ Pay Range : There are a host of factors that can influence final salary including, but not limited to, geographic location, Federal Government contract labor categories and contract wage rates, relevant prior work experience, specific skills and competencies, education, and certifications. Our employees value the flexibility at CACI that allows them to balance quality work and their personal lives. We offer competitive compensation, benefits and learning and development opportunities. Our broad and competitive mix of benefits options is designed to support and protect employees and their families. At CACI, you will receive comprehensive benefits such as; healthcare, wellness, financial, retirement, family support, continuing education, and time off benefits. Learn more here . The proposed salary range for this position is: $115,600 - 254,200 USD CACI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, age, national origin, disability, status as a protected veteran, or any other protected characteristic.

What We're Looking For At HNTB, you can create a career that is meaningful to you while building communities that matter to all of us. For more than a century, we have been delivering solutions for some of the largest, most complex infrastructure projects across the country. With our historic growth, it is an exciting time to join our team of employee-owners. This opportunity entails being responsible for the leadership and management of team in support of the project’s profitable operation. Responsible for proactively managing the projects technical budget (direct labor and expenses, including technical sub-consultants), schedule, technical requirements, contractual obligations, project communications and HNTB’s 4 for 4 (Consistent delivery of quality work, on time, on budget and to the client’s satisfaction on every project) performance. Responsible for gross revenue of $10M-30M. What You’ll Do: Actively manages project scope, schedule and budget. Serves as the primary client liaison to bring the schedule, budgets and scope of work to completion and to the client’s satisfaction. Implements the firm’s project delivery plan using HNTB’s Sophisticated Delivery Approach (SDA) on each project. Develops project scope and fee quotation, and assists in the preparation of proposals and contracts. Provides oversight and monitoring of work to less experienced project managers. Coordinates work efforts and review work performed. Schedules and manages for integration of quality management during all phases of a project. Oversees project staffing with departments, offices and divisions. Performs other duties as assigned. What You’ll Need: Bachelor's degree in Engineering or relevant degree 16 years relevant experience In lieu of education, 20 years relevant experience PE/AICP Proficiency with all Microsoft Office programs is necessary, including familiarity with SharePoint and ProjectWise. Ability to effectively communicate complex concepts with the client agency, public stakeholders, customers, co-workers and management, both verbally and in writing. Demonstrates strong leadership skills, and the ability to manage multiple projects simultaneously. Knowledgeable in management and control of project budgets and resources. Experience in large scale bus rapid transit (BRT) design projects. Additional Information Click here for benefits information: HNTB Total Rewards Click here to learn more about Equal Opportunity Employer/Disability/Veteran Visa sponsorship is not available for this position. #SR #TransitAndRail #TransportationPlanning . Locations: Atlanta, GA . . . . . . . . . . . . . . . . . NOTICE TO THIRD-PARTY AGENCIES: HNTB does not accept unsolicited resumes from recruiters or agencies. Any staffing/employment agency, person or entity that submits an unsolicited resume to this site does so with the understanding that the applicant's resume will become the property of HNTB. HNTB will have the right to hire that applicant at its discretion and without any fee owed to the submitting staffing/employment agency, person or entity. Staffing/employment agencies who have fee agreements with HNTB must submit applicants to the designated HNTB recruiter to be eligible for placement fees.

Southwest Power Pool (SPP) is about more than power. We’re about the power of relationships. Our employees have the opportunity to work together to ensure electricity is delivered reliably and affordably to the millions of people living in our service territory. We have been voted one of Arkansas’ Best Places to work by Arkansas Business and we are looking for a member of our team who is passionate about our mission to keep the lights on! We have a core ideology here at SPP that we stand by: Do the right thing, for the right reason, in the right way. We believe in supporting our employees through a fantastic benefits package: Competitive and transparent pay with bonus opportunities Excellent insurance package including three great medical plans to choose from, employer-paid short-term disability, long-term disability, and life insurance Relocation bonus (if applicable) Hybrid working environment for positions that are eligible Fantastic contributions to your retirement through a 401(k) savings plan with employer-match benefits and a pension (defined benefit plan) fully funded by SPP COMPENSATION INFORMATION The salary range(s) represents our good faith estimate for the role at this time. While we strive to provide competitive and transparent compensation, there may be circumstances where an offer is above or outside of the listed range. We are open to discussing salary expectations with qualified candidates considering factors such as the candidate's qualifications, skills, competencies, experience and geographic location will all be considered during the hiring process. Sr. Engineer II Pay Range: $123,700 - 135,000 Sr. Engineer Pay Range: $106,500 - $123,700 Engineer II Pay Range: $88,000 - $98,000 Join our team as a Market Design Engineer! The Market Design Engineer is responsible for understanding and analyzing the current Markets+ market design, evaluating the impact of proposed modifications, and leading efforts to resolve market issues. This role involves facilitating market design changes through the SPP stakeholder process, interacting with various working groups, and providing market analysis to support these changes. The Market Design Engineer will work closely with SPP Operations, Legal, Regulatory, Settlements, and Congestion Hedging departments to ensure that implemented software and processes align with the market design and comply with FERC rules and policies. This position also involves coordinating market design changes and analysis between the Markets+ and the SPP Integrated Marketplace, while leading discussions with market participants, vendors, FERC, and other RTOs/ISOs to establish market policy. The role will also support Western Market initiatives and work on education and training for junior-level staff in the Market Design team. Key Responsibilities: Market Design Understanding: Apply a thorough understanding of SPP's market rules and policies to ensure consistent execution of business functions. Coordination & Communication: Engage with SPP market participants and member companies to discuss and coordinate market design issues and changes. Facilitate Market Design Changes: Recommend market design changes to management, facilitating them through the SPP stakeholder process and ensuring alignment with market policy. Market Analysis & Reporting: Conduct detailed market analysis to identify weaknesses and areas for improvement, and create comprehensive market reports and metrics. Cross-Departmental Collaboration: Work closely with SPP Operations, Legal, Regulatory, Settlements, and Congestion Hedging teams to ensure market design consistency and compliance with FERC regulations. Support FERC Filings: Assist in supporting FERC filings by providing relevant data and supporting the drafting of testimony and filing letters. Research & Benchmarking: Research and analyze market designs from other RTOs/ISOs and Western Market initiatives to identify potential improvements or opportunities for innovation. Education & Training: Develop educational materials on market design topics and support the training and development of junior market design staff. Internal & External Facilitation: Lead internal and external discussions to resolve market issues and present market design changes to SPP stakeholder committees and working groups. To be successful as a Market Design Engineer we're looking for: Bachelor of Science in Engineering, this degree should: Be from a university that meets the requirements to sit for the Professional Engineering exam (in Arkansas, that is most typically a degree from an ABET accredited university or a graduate degree from a college that has an ABET accreditation), Degree should be in a calculus-based engineering field and preferred degree programs are Electrical Engineering, Computer Engineering, Industrial Engineering, Mechanical Engineering, or Systems Engineering Sr. Engineer II - Nine (9) years of relevant Engineering experience; Professional Engineer License or Advanced degree in related field of study may satisfy one (1) year of experience requirement. Two (2) years of experience may satisfy both a Professional Engineer License and Advanced degree in related field Sr. Engineer - Five (5) years of relevant engineering experience, a professional engineer license, or an advanced degree may satisfy the requirement for one year of experience. Engineer II - Two (2) years of job-related work experience, not eligible for remote work Competent with the administrative and communication tools for word processing, spread sheet development and time keeping, as a minimum Strong knowledge of several power systems analysis tools applicable to power system steady state, dynamic, short circuit, or database management systems Strong inter-personal and team work skills along with good written and verbal communication skills Excellent working skills with communication and data handling software such as Microsoft Office© Word, Excel, Access Understanding and comply with compliance with SPP Policies and Procedures Preferred : A Professional Engineer License Advanced degree in related field of study Electric Utility Industry experience Proficient with most SPP power systems analysis tools with a solid command of several SPP tools and/or processes Sound understanding of the SPP Open Access Transmission Tariff, FERC & NERC governing documents, SPP By-Laws, SPP Criteria and the SPP Committee structure Position Type and Expected Hours of Work: This is a full-time position. Days and hours of the workweek are Monday through Friday; 8:00 a.m. to 5:00 p.m. Working extended hours may be required. Travel Requirement: This position requires moderate travel (approximately 10-15%) SPP is an Affirmative Action and Equal Opportunity Employer of individuals with disabilities and protected veterans and is committed to excellence. If you need a reasonable accommodation for any part of the employment process, please contact us at HR@spp.org and let us know the nature of your request. We will only respond to messages left that involve a request for a reasonable accommodation in the application process. We will accommodate the needs of any qualified candidate who requests a reasonable accommodation under the Americans with Disabilities Act (ADA). At SPP we believe in a culture of belonging. Learn more here: Culture of Belonging - Southwest Power Pool . Full job descriptions will be made available to those selected for an interview.

As Civil Design Intern you will be assigned to our Design team. It will include responsibilities typical of a full-time assistant engineer. You can expect to work on tasks including but not limited to: Performing increasingly responsible engineering work in the design and analysis of innovative stormwater, water resources, and drainage design projects, construction field support and inspection, storm water quality inspection; and perform other duties to support our Design Team. Support innovation in water resources engineering, with emphasis on design of infrastructure that is founded on watershed modeling and performance. Support development of stormwater capture facility conceptual design content, including conceptual drawings and maps, geospatial analysis, hydraulic analysis, and technical writing. Commit to the various duties necessary to advance Craftwater’s qualifications and reputation in the industry We require our intern to report to our shared workspace 4 times per week in Pasadena, CA. Our in-person time is used to facilitate project collaboration, meetings, professional development & culture. Full-time preferred, flexible schedule, year-round opportunities. Qualifications 3.5 Minimum GPA Junior school year or higher required. Masters and Doctorate a plus. Civil/Environmental Engineering major preferred. Civil 3D, Microstation, InfoDrainage, ArcGIS Pro, Bluebeam experience a plus. $20 - $27 an hour

Space Vehicle Design and Integration Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) is hiring a Senior Space Vehicle Design & Integration Engineer in El Segundo, CA . Position Responsibilities: Manage and directs the Structural and Mechanical Space Vehicle Engineering Design teams including Structures, Analysis, Thermal, Dynamics, Mechanical, Propulsion, Solar Array, Mass Properties, and Blankets from requirements, design, verification, and production support Develops Common Non-Recurring Product Definition (C-NRPD) plans and ensures execution of requirements, design layouts, analysis, testing, and assembly integration in a timely manner to support program milestones Leads and participates in system level trades to ensure the vehicle design meets all physical, mechanical and environmental requirements while accommodating the required payload, power, propulsion, thermal, communications and attitude control system requirements Defines structural, mechanical, environmental design and integration requirements and its constituent assemblies and components including both flight and non-flight hardware Leads design and manufacturing integration requirements using DFMAT principles Leads the layout reviews and program level General Arrangement meetings for collaborative engineering across various disciplines; resolves design integration issues between segment IPTs Approves Interface Control Drawings/Models including Moving Mechanical Assemblies (MMAs) Oversee Critical Clearance Control Plan (CCCP) including definition and verification of Critical Clearance Control List activities (CCCL) Supports and approves manufacturing integration plans, overseeing Digital Mock-Up (DMU) and Virtual Manufacturing (VM) simulation reviews Leads the development of structural qualification and acceptance test plans Supports Program milestone reviews (SRR, PDR, CDR, IDR etc.) and Gate Closure/Lien Closures Supports design non-conformances and resolution during production Provides program observed lessons learned and continuous improvements Investigates emerging technologies to develop concepts for future product designs This position is expected to be 100% onsite. The selected candidate will be required to work onsite at the listed location. This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 20 or more years' related work experience or an equivalent combination of technical education and experience (e.g. PhD+15 years' related work experience, Master+18 years' related work experience) 5 or more years of experience in technical or engineering field 5 or more years of experience on space, launch vehicle, or satellite programs 5 or more years of experience managing and directing the Structural and Mechanical Space Vehicle Engineering Design teams including Structures, Analysis, Thermal, Dynamics, Mechanical, Propulsion, Solar Array, Mass Properties, and Blankets from requirements, design, verification, and production support Preferred Qualifications (Desired Skills/Experience): 10 or more years related work experience or an equivalent combination of education and experience. Experience with multi-disciplined development in any of the following areas: Space structural and mechanical design; Space System integration and test; Space Systems Engineering Mechanical systems and vehicle design architecture. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Shift: This is a 1st shift position. Drug-Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $178,500 - $241,500 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires an active U.S. Top Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Company: NICO National Indemnity Company Want to work for a company with unparalleled financial strength and stability that offers "large company" benefits with an exciting, friendly, and "small company" atmosphere? Our companies, as members of the Berkshire Hathaway group of Insurance Companies, provides opportunities for professionals interested in just that. A Brief Overview Want to work for a company with unparalleled financial strength and stability that also offers "large company" benefits with an exciting, friendly, and "small company" atmosphere? That is what you will find within the National Indemnity Group of Insurance Companies as well as outstanding opportunities for professionals looking to grow in their careers. This position will be located in Omaha, NE Office and eligible for hybrid work after the completion of training. What will you do? MARKETING MATERIALS: Updates and distributes marketing materials as directed. Adds any new or changed material to historical catalogue of materials in current use as well as those archived for audit, regulatory, and good company practices purposes. CROSS UNIT COMMUNICATION: May collaborate with Underwriting, Product Management, Pricing, and Business Analysts regarding product enhancements, recent successes, class highlights, coverage highlights, and any other pertinent information requiring communication to agents. Assembles and distributes all emails and marketing materials to home office staff and agents. Maintains and updates email addresses for accuracy of delivery. Follows the calendar to meet scheduling deadlines. CREATIVE: Designs and develops other materials at the direction of others or on own as appropriate, such as videos, webinars, training materials, internal communications, external publications, company history, materials needed for Company functions, etc. Helps create creative element for national marketing meeting and, at manager direction, creates presentations for manager meetings. Collaborates with Underwriting, Product Management, Pricing, Marketing, Executives, Human Resources, and business analysts to understand content and marketing direction. WEBSITE: Participates in the updates and maintenance of Company website. Creates social media posts and digital ads. Works to execute any changes by internal parties, including gathering and updating new content from various areas of the company. Updates information on the websites and obtains approval before publishing. BRANDED PRODUCTS: Communicates with merchandising vendors to find branded items for marketing professionals, agents, industry events, company events, etc. Selects items for consideration. Orders items as directed. Coordinates with merchandising vendor. AD HOC REQUESTS: May complete graphic design requests (logo use, ad hoc presentation documents, advertisement photos/graphics, software UI design, etc.) ensuring that brand standards are met. Maintains brand standard collateral (branding guide, style sheets) for entire organization and ensures the use of any brand logos, colors, formatting are consistently adhered to by both internal and external parties. Assists with development of any internal items that require branding, including skin designs for various internal company programs. MARKETING BOOTH: Maintain marketing booth calendar to be used for agency conventions, industry events, etc. including shipping and distributing company branded convention materials. Works with others to execute designs for pop-up displays, table dressing, and other branded items. LEARNING AND DEVELOPMENT: Continually learns and adapts to our changing business and software products. Learns Agile principles, products, and testing principles, and any additional software, platform, or process needs/changes. Maintains testing standards, methodologies, and frameworks. Supports and encourages a culture of continuous improvement of testing processes, tools, and methodologies. Actively develops skills by participating in company-led training sessions, watching e-Learning content, reading articles, etc. POSITIVE TEAM CULTURE: Exhibits and promotes a positive team culture includes but not limited to accepting constructive feedback, being respectful of others, being helpful to coworkers, volunteering to assist with projects, etc. OTHER: Performs related duties as directed or as situation dictates such as participating in other activities, projects, and initiatives as required. Duties are listed in order of greatest importance. Other responsibilities may be assigned. Education Bachelor's degree in related field or equivalent work experience. Experience One or more years work experience. Required Knowledge Personal computer and Microsoft Office Suite Working knowledge of entire Abode Creative Suite Understanding of graphic design principles Understanding of marketing techniques Preferred Knowledge Ability to create web documents & email using design software and code in HTML for delivery Studio Photography experience Required Skills and Abilities Excellent oral and written communication Ability to think creatively and outside of the box Work well with multiple projects and changing deadlines Be able to prioritize efficiently while communicating priority levels to parties involved Proofreading Learn quickly Work independently Work well with others Respond well to demands on time and resource Maintain confidentiality Work with detail with accuracy organize time and resources and handle multiple high priorities We want you to be involved! We offer Employee Resource Groups for volunteering, connecting with others, social gatherings, and professional development. We also regularly seek employees input through companywide surveys. We care about your health and wellbeing! Our Wellness program is integrated into the Company culture with an online wellness portal that offers a year-round, one-stop-shop to manage and track all areas of health, our Omaha office boasts a complimentary state-of-the-art onsite fitness center, and a robust wellness program. Benefits, Perks and more! We offer retirement and savings plan with immediate enrollment with 100% employer match up to 5%, Medical, Dental and Vision for regular, full-time employees and eligible dependents, a dedicated Learning & Development program for employees to grow personally and professionally, 100% upfront Educational Reimbursement program, subsidized downtown parking, competitive time off policies including parental leave, an Employee Assistance program and much more!

3 Day Blinds is a national retailer and manufacturer of quality, custom-made blinds, shades, draperies, and shutters. We are proud to be part of the Hunter Douglas family of brands. Over the last 40 years we've successfully helped transform our clients' homes and workplaces by offering a wide variety of products that add beauty and comfort to every space. It takes a talented group of individuals to do what we do, and we do it together as One Team. We strive to create a culture of learning and opportunity, and most importantly, an environment where you can feel passionate and connected to your work every day. We are searching for candidates that are driven, intelligent, creative, and entrepreneurial. By offering challenging and accelerated opportunities for growth, powered by a shared hunger for success, we create a space for your career to thrive. In return for your expertise, we are committed to providing competitive and robust total compensation and benefit packages to ensure you feel valued. Our dream is to become the fastest growing, most loved, window covering company in the world. What's yours? In this role, you'll spend your days making the homes and workspaces of our clients more beautiful, functional, and comfortable by servicing the qualified leads that our award-winning marketing team generates. Everyone in the company is committed to your success, and your District leadership and field support team will work closely with you to help you reach your sales objectives, so you can take full advantage of our generous compensation plan. We also provide you with state-of-the-art training, tools, and resources to support your success. Our product offerings are kept fresh and current to ensure you can expertly meet your client's preferences and unique buying needs. We are committed to providing our clients with a seamless purchasing experience that is backed by our industry-leading warranty and outstanding client care services, so you can feel confident and proud in your Design Consultant role with 3 Day Blinds. What you'll do Expertly match our products and services to client's needs Successfully close appointments by demonstrating our unique Value Proposition, and by building trust and credibility Properly execute all systems and procedures to ensure client satisfaction, and to avoid order errors that adversely affect the company's bottom line and positive reputation Measure, record, and configure specifications accurately and efficiently Provide high- level client service and follow up in a friendly, professional and timely manner for both internal and external clients Proactively identify and generate new business opportunities through networking, referrals, and market research to build a pipeline of self-generated business (in addition to company generated appointments) Be flexible to the needs of the business, including appointment scheduling, time off requests, attending team meetings and training Live our Core Values of Integrity, One Team, Excellence, Superior Client Experience and Passion, to Delight our Customers Understand and execute Company operating policies and procedures as outlined in Team Handbook and other related communications Who you are Critical thinking and problem solving skills Quick learner who is adaptable, self-reliant, resourceful and handles competing priorities Understands and carries out oral and written instructions, and requests clarification when needed Expresses thoughts, ideas, concerns in a positive, respectful and productive manner Works independently, but also functions well as part of a team High school degree or equivalent is required. Some college work is preferred Availability to work full-time five days per week, one being a weekend day Proficiency with using a PC and with Microsoft Windows based programs Ability to quickly learn and follow new technology processes and systems Can drive within canvassing areas and also accommodate longer drive times to meet the needs of clients outside of assigned area Reliable transportation, a valid driver's license and proof of insurance Can lift & carry up to 20 pounds 2-5 years relationship selling experience within either: In- home or outside sales, preferably in specialty or custom product/services Retail environment - ideally in like field such as Home Décor/Furnishings Education or experience in Design and Decor preferred Experience with POS Systems preferred What's in it for you? As a Design Consultant with 3 Day Blinds, you can join our growing sales team with confidence! We offer a generous uncapped compensation plan and bi-weekly draw while you ramp up your expertise. You will be provided with quality company generated appointments, and are greatly rewarded for self-generated appointments as part of our lucrative monthly bonus plan. Design Consultants at 3 Day Blinds are earning a nationwide average of $80,000-90,000 annually in commission and bonus. The District Sales Manager can speak more directly to you about the territory's historical earning potential, but the biggest variable in the equation will be you. You'll receive 4-weeks of paid, world class training and be provided with state of the art tools, including a laptop, smartphone, product samples, and other resources necessary for your success - at no cost to you! We also provide mileage reimbursement. You'll receive a competitive benefits package including medical, dental, vision, time off with pay, and a 401(k) plan with a degree of employer matching. We provide short-term and long-term disability benefits at no cost to you! In addition, we offer company-paid life and accidental death and dismemberment insurance with opportunities to elect additional voluntary insurance plans as well. We offer eligible employees six weeks of paid parental leave to bond with a child following birth, adoption, or foster placement. Enjoy amazing discounts on our 3 Day Blinds products as well as access to various other exclusive discounts! Please note, all offers presented to candidates are carefully crafted to ensure market competitiveness, equity, and reflect the individual candidate's education, experience, skills and potential. Hunter Douglas is an Equal Opportunity Employer and complies with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply. #LI-MS1 #Li-hybrid

Base Pay Range: $125,100.00 - $212,700.00 Primary Location:USA-CA-Milpitas-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits identified below. Interns are eligible for some of the benefits identified below. Our pay ranges are determined by role, level, and location. The range displayed above reflects the minimum and maximum pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including location, job-related skills, experience, and relevant education level or training. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications Electrical Design Engineers are core to KLA's technology, while we do not currently have an opening, we are always building our Electrical Engineers talent community, we are interested in learning about your background. Apply to this posting for Future Opportunities with KLA. KLA has a wide range of Electrical Engineering opportunities, from PCB design to system design: A) The PCB design candidate will produce PCB designs, schematics, and work closely with layout engineers to fabricate printed circuit boards. B) Familiarity with common electronic blocks such as power supply regulators, isolators, op-amps, ADCs/DACs is desired. Desired qualifications include experience with OrCAD PCB, Altium, PADS, or Eagle; ADS, Hyperlynx simulation experience is a plus. C) The candidate will work closely with FPGA and firmware engineers to characterize and test full PCB systems. D) The system design candidate will produce electrical system designs, and work closely with mechanical engineers to ensure everything meets the requirements and is easily serviceable. E) Design includes power distribution, interconnection diagrams, safety interlocks and supporting hardware, computers, data storage, wired or fiber optic networking, and cabling to connect it all together. D) Familiarity with AC power distribution is desired. Other useful skills includes experience with programmable logic controllers, cable and fiber optic design, ladder logic, or soldering. E) Strong communication skills and the ability to work on cross-disciplinary teams is a must. Minimum Qualifications Doctorate (Academic) Degree with 3 years of Work Experience. OR Master's Level Degree and related work experience of 6 years. OR Bachelor's Level Degree and related work experience of 8 years. The company offers a total rewards package that is competitive and comprehensive including but not limited to the following: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. KLA is proud to be an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, national origin, sex, gender identity, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other status protected by applicable law. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at talent.acquisition@kla.com or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched KLA's Careers website for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to talent.acquisition@kla.com to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

About Us We're not like other insurance companies. From our specialty products to our business model, our culture to our results - we're different. Different is who we are, and how we work, interact, deliver and succeed together. Creating a different and better insurance experience doesn't just happen. It takes focus and a shared passion for going beyond the expected to forge relationships and deliver care that makes a difference. This approach rises from and is supported by our talented, ethical and smart team of employee owners united around a single purpose: to work alongside our customers and partners when they need us, in unexpected ways, with exceptional results. Apply today to make a difference with us. RLI is a Glassdoor Best Places to Work company with a strong, successful background. For decades, our financial track record has been stellar - a testament to our culture and validation of our reputation as an excellent underwriting company. Position Purpose Under frequent supervision, provide underwriting support from application through post-binding activity. Interact with internal team members and broker customers to efficiently and accurately support the underwriting practice. Depending on prior experience, expected to learn, shadow, and train in the field of underwriting through various special projects. Become proficient in the technical platform and processes involved in Underwriting. Utilize judgement to align the aspects of the account to ensure consistency amongst the quote, binder, and policy. Identify notable inconsistencies in data elements and work with the Underwriter to reconcile. Study for and complete insurance examinations as deemed appropriate. Attend any relevant training sessions and study to complete relevant insurance examinations. Expected to progress to quote and bind under direction of underwriting management. Principal Duties & Responsibilities Provides underwriting support for the entire underwriting process from start to finish. Review incoming submissions to determine viability for quoting. Review RMS Modeling results for opportunity and accuracy. Provide new business quotes for underwriter review or directly to brokers as determined by Underwriting Authority Letter. Complete renewal review process. Review inspection reports and financial information to notify underwriters of potential issues or provide recommendations. Process endorsements and determine acceptability. Upon completion, review and approve for distribution. Handle worksheet process consisting of completing Underwriting Worksheet, Rating Worksheet, and Review/Pick Policy Forms Preform policy review process and approve for distribution. Assist in special projects and other duties as needed. Education & Experience Typically requires a bachelor's degree in insurance, finance, risk management, business or a related field 0+ years of related experience for consideration [OR] equivalent level of education and experience Knowledge, Skills, & Competencies Ability to use analytical methods in underwriting processes to find workable solutions. Ability to verbally and in writing, communicate findings and recommendations to internal and external contacts on underwriting matters. Ability to use software to summarize and analyze large amounts of data. Understands, applies, & properly documents nature of operations of the risk for accounts assigned & communicates findings. Ability to prepare, review, and complete underwriting analysis of accounts. Analytical skills and understanding of submission requirements, model entry, and product appetite. Participates in underwriting related continuing education. Compensation Overview The base salary range for the position is listed below. Please note that the base salary is only one component of our robust total rewards package at RLI. The salary offered will take into account a number of factors including, but not limited to, geographic location, experience, scope & responsibilities of the role, qualifications/credentials, talent availability & specialization, as well as business needs. The below range may be modified in the future. Base Pay Range $27.42 - $38.11 Total Rewards At RLI, we're all owners. We hire the best and the brightest employees and allow them to share in the company's success through our Total Rewards. With the Employee Stock Ownership plan at its core, the Total Rewards program includes all compensation, benefits and perks that come with being an RLI employee. Financial Incentives Annual bonus plans Employee stock ownership plan (ESOP) 401(k) - automatic 3% company contribution Annual 401k and ESOP profit-sharing contributions (Up to 15% of eligible earnings) Work & Life Paid time off (PTO) and holidays Paid volunteer time off (VTO) to support our communities Parental and family care leave Flexible & hybrid work arrangements Fitness center discounts and free virtual fitness platform Employee assistance program Health & Wellness Comprehensive medical, dental and vision benefits Flexible spending and health savings accounts 2x base salary for group life and AD&D insurance Voluntary life, critical illness, & accident insurance for purchase Short-term and long-term disability benefits Personal & Professional Growth RLI encourages its employees to pursue professional development work in insurance and job-related areas. We make a commitment to employees to provide educational opportunities that help them enhance their skills and further their career advancement. RLI fosters a true learning culture and encourages professional growth through insurance courses, in-house training and other educational programs. RLI covers the cost for most programs and employees typically earn a bonus upon successful completion of approved courses and certifications. Our personal and professional growth benefits include: Training & certification opportunities Tuition reimbursement Education bonuses Diversity & Inclusion Our goal is to attract, develop and retain the best employee talent from diverse backgrounds while promoting an environment where all viewpoints are valued and individuals feel respected, are treated fairly, and have an opportunity to excel in their chosen careers. We actively support, and participate in, initiatives led by the American Property Casualty Insurance Association that aim to increase diversity in the insurance industry. Cultivating an exceptional and diverse workforce to deliver excellent customer service reinforces our culture and is a key to achieving superior business results. RLI is an equal opportunity employer and does not discriminate in hiring or employment on the basis of race, color, religion, national origin, citizenship, gender, marital status, sexual orientation, age, disability, veteran status, or any other characteristic protected by federal, state, or local law.