Auto-apply to these electrical jobs

The Franklin Biomass Facility, located in Carnesville, GA, generates 55 net megawatts of clean, renewable energy by converting sustainably sourced wood biomass into electricity. The facility utilizes an advanced Foster Wheeler boiler, along with a hot precipitator and selective catalytic reduction (SCR) system, to ensure efficient combustion and reduced emissions. With a single turbine generator, the plant reliably supplies power to the local grid while promoting sustainable energy practices and supporting long-term environmental stewardship in the region. Opportunity Summary The Associate Instrumentation, Controls, and Electrical (IC&E) Technician plays an important role in supporting the safe, reliable, and efficient operation of the Franklin Biomass Facility. This position assists in the calibration, testing, and troubleshooting of instrumentation, control systems, and electrical equipment essential to plant performance. The IC&E Technician supports PLCs, DCS, SCADA, and turbine control systems integrated with the Foster Wheeler boiler, biomass fuel handling systems, emissions controls (including the hot precipitator and SCR), and the steam turbine generator. By performing preventive and corrective maintenance, this role helps maintain plant reliability, minimizes downtime, and supports compliance with environmental and safety standards. Your scope of responsibility as Associate IC&E Technician includes the following primary functions: Assist in performing calibration, testing, installation, troubleshooting, and maintenance of instrumentation and control systems, including PLCs, DCS, control valves, fan dampers, conveyors, fuel feed systems, variable speed drives, transmitters, analyzers, and other biomass-related instrumentation to ensure reliable plant operation. Assist in updating and optimizing PLC and DCS logic-based controls—including ladder and P&ID logic—in coordination with engineering and senior technical staff to improve automation and enhance system performance. Carry out corrective, preventive, predictive, and emergency maintenance on electrical systems, including switchgear, motor control centers, transformers, motors, batteries, inverters, chargers, generator excitation systems, and variable speed drives. Calibrate and maintain precision instruments such as pressure and temperature transmitters and stack CEMS equipment and perform plant wiring repairs and installations using diagnostic tools including Amprobes, multimeters, and oscilloscopes. Use DCS and SCADA systems to monitor and support efficient operation of boilers, steam turbine generators, and emissions control systems including SCR and hot precipitators. Perform turbine control system calibration and functional checks to ensure efficient start-up, shutdown, and steady-state operation of the steam turbine. Assist with testing and tuning of boiler controls, combustion systems, turbine performance, and emissions reduction technologies to optimize plant performance and compliance. Work with contractors and vendors during outages and maintenance projects to support technical work, verify results, and ensure adherence to safety requirements. Maintain accurate records of maintenance activities, calibration data, equipment changes, plant drawings, and vendor documentation. Promote a strong safety culture by identifying hazards, following safe work practices, and ensuring proper handling of hazardous materials in accordance with environmental and safety regulations. Participate in continuous improvement activities such as root cause analysis (RCA), procedure updates, reliability initiatives, and equipment performance optimization. Perform other duties as assigned to support the safe, efficient, and reliable operation of the Franklin Biomass Facility. NAES Safe Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance. Working Relationships The IC&E Technician reports directly to the Maintenance Manager and receives general direction from plant management. This role involves interfacing with contractors and original equipment manufacturer (OEM) personnel to ensure necessary support and coordination. Physical Requirements and Working Conditions Physical demands include standing for extended periods of time, climbing multiple levels of stairs, climbing ladders over 50 feet in height, entering and exiting equipment cabs, traversing uneven or elevated surfaces, and working inside confined spaces. The role routinely requires lifting up to 50 pounds and performing tasks from elevated platforms or walkways. Work may be performed in conditions involving dust, wood particles, fumes, high noise levels, and extreme temperatures near operating equipment. Outdoor tasks in all weather conditions are required, including in high-heat environments adjacent to biomass processing systems. The use of personal protective equipment (PPE) is mandatory and may include hard hats, safety glasses, hearing protection, gloves, high-visibility clothing, steel-toe boots, flame-resistant clothing (FRC), respirators, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions are enforced in and around the facility to ensure plant safety and environmental compliance. Fitness for Duty All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening. Work Schedule The Associate IC&E Technician works a standard Monday to Friday day shift schedule, ensuring consistent plant operation and support during regular business hours. This position will also occasionally necessitate extended working hours and flexible shifts as needed, including weekends and holidays, in response to schedules, workload demands, and plant conditions. Periodic callouts or “On call” status will also be required. Compensation This position offers a base pay rate ranging from $36 to $41 per hour, along with an annual performance bonus. Qualifications and Technical Competencies We are seeking a Technician with some relative experience in power generation operations and maintenance, who demonstrates reliability, attention to detail, and a strong commitment to teamwork and safe work practices. An Associate degree in Plant Technology, Mechanical Engineering Technology, Electrical Engineering Technology, Process Technology, or a related field is preferred. Alternatively, equivalent technical training in industrial maintenance or instrumentation and control is beneficial, though not required. Relevant industry or military experience may be considered in lieu of education. Technician level experience within power generation or heavy industrial facilities, with a solid understanding of operations, safety procedures, and maintenance practices. Working knowledge of electrical systems, including switchgear, transformers, motors, motor control centers, batteries, inverters, chargers, and generator excitation equipment. Proficiency with and ability to maintain and troubleshoot instrumentation and control systems used in biomass-fired power plants, including Foster Wheeler boilers, steam turbines, burner management, combustion control, boiler and turbine controls, emissions controls (SCR and hot precipitators), CEMS, and fuel handling systems. Familiar with boiler operations, auxiliary plant equipment, and distributed control systems (DCS), with the ability to interpret process data and assist with system performance improvements. Capable of reading and interpreting mechanical and process drawings, wiring diagrams, schematics, and OEM manuals to perform maintenance, and troubleshooting activities. Knowledgeable in the use of computerized maintenance management systems (CMMS) for planning, scheduling, and tracking maintenance work. Proficient with MS Office applications for documentation, reporting, and data entry. Experienced working with cross-functional teams, contractors, and vendors to coordinate maintenance activities and support continuous plant operations. Strong written and analytical communication skills to clearly document and communicate technical information, findings, and recommendations. Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times. About NAES NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants. NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.

About the Role Work on open ended problems centered around electrical engineering, including some mechanical engineering and software writing. Become an expert in camera development, 4G/5G technology, detecting cars, etc. Learn with urgency, independently, and using your peers as sparring partners for ideas. Your work will be meaningful to the company right away. There are no useless Blissway employees, everyone's work must be essential. You will be trusted to make your own decisions and share the responsibility of prioritizing our goals with the team. There are no dedicated PMs to tell you what to do. What we offer Annual salary between $125k and $165k depending on experience; significant stock option package; top-tier medical, vision and dental insurance; life and disability insurance; 401k. Flexible hours. Work four to five days a week in person at HQ in South Denver. Four weeks of vacation per year. We push you to take them! At-the-office breakfast, lunch, and snacks are on the company. About Blissway The company is profitable; We say most of our problems are 1 to 100, with a few still 0 to 1. Blissway is a startup that simplifies the collection of tolls and greatly improves highway safety. In a way, we are multiple startups in one: deep tech, AI/ML, fintech, hardware, SaaS, IoT, transportation, and GovTech. For the past five years we have built a nearly insurmountable software & hardware technological lead in tolling and highway safety, under-the-radar industries that are bigger than football. With a 20-person all-star team achieving more than competitors with 4k employees, this is your opportunity to have an oversized impact in the massive Interstate Highway System covering every metropolitan area in the US (well, minus Juneau AK). You are a good fit if you Are smart, hard working, and care about the work that you do. You like a challenge. Can code. Which language you are most proficient is not important, as long as you learn fast. We mostly use Python and Typescript. Have incredible eye for detail. Experience building circuits, IoT devices, writing code, playing with CAD, etc. Take ownership of projects and put in the necessary time to meet deadlines. A recent company survey showed that the team is averaging 50 hours to get their tasks done, with occasional bursts of 70+ hours for bigger deadlines. Excel at solving hard problems and take full ownership. We expect you to figure out what you need to get stuff done. Flexible to help all areas of the company when other teams need a boost. Usually this is a great opportunity to learn and get exposure to new tech. If you are uncomfortable with the idea of fluid teams or only want to work on niche things, this will not be a good fit. This would be a bad fit if you are hoping for senior level mentorship. If you want to learn more, let's talk!

Company Description BlueScope Coated Products is one of the largest coil coating companies in the United States, with facilities across the country. With more than four decades of expertise providing painted metal coils and toll processing services for industries in the construction and consumer product markets, we pride ourselves on delivering premium quality, reliable service, and ongoing innovation to our customers. As a member of the BCP Middletown Maintenance team, the Electrical Technician is primarily responsible for maintaining and repairing the production equipment. Reporting to the Maintenance Manager, the technician will develop and implement the maintenance programs necessary to ensure the short-term and long-term reliability of the equipment, as well as lead the effort to optimize maintenance costs, maximize equipment availability and reduce unsafe conditions. Responsibilities include but are not limited to: Troubleshoot, repair, problem-solve, and maintain all electrical control problems for all manufacturing equipment. Troubleshooting machine malfunctions using electronic and PLC techniques Performs routine, emergency, and preventive maintenance on all electrical equipment/parts. Study equipment manuals to develop audit items and preventative maintenance schedule. Install or assist in the installation of new equipment, including proper layout and alignment. Makes preventative maintenance checks and inspections as required and on time. Identify, research, prepare and present solutions to control problems and continuous improvement projects. Evaluate equipment malfunctions with a sense of urgency to minimize downtime. Install, replace, or change machine parts and attachments, according to production specifications. Modify equipment as necessary to improve safety, quality, productivity, and reliability. Perform tasks in a quality fashion by meeting or exceeding the internal customers’ requirements. Communicate professionally with plant personnel as to the important repair steps taken, parts ordered, and estimated time to complete the repairs or projects. Maintains proper housekeeping expectation for work area, equipment and tools. *This opening is for night shift only on a 2-2-3 schedule* Qualifications To perform satisfactorily in this position, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations will be made to enable individuals with certain disabilities to perform the essential functions. Education and/or Experience : High school diploma or General Equivalency Diploma (GED). Journeyman licensed with 5+ years of experience in an industrial electrical maintenance position. PLC experience, preferably Allen Bradley such as SLC 500, RSlogix 5/500/5000, PLC5, ControlLogix, Micrologix, and Panelview systems Strong electrical knowledge (circuit breakers and fixtures). Demonstrated fault finding experience. Proficient in reading blueprints and schematics. Proficient communication skills – particularly, the ability to explain complex electrical issues. Must be able to perform physically demanding work, such as climbing, stooping, kneeling, crouching, reaching, standing, walking, pushing, pulling, lifting, grasping, twisting, and bending for extended periods of time. Reliability, dependability, and self-motivation. Language Skills : The ability to read and comprehend documents including safety rules, operating and maintenance instructions, procedure manuals and simple correspondence. Also, the ability to communicate information in small group situations to other employees. Mathematical Skills : Ability to calculate figure’s and amounts such as fractions, percentages, area, circumference, and volume. Reasoning Ability : Ability to apply common sense understanding, to perform work instruction’s that are furnished in written, oral and/or diagram form also, the ability to solve problems’ that involve multiple variables in a standard situation. Physical Demands : While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to walk. The employee is occasionally required to stand; sit; bend; stoop; use hands to handle or feel objects, tools, or controls; reach with hands and arms; climb or balance. The employee will be required to be capable of lifting a minimum weight of 75 pounds. Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

Merit Electric is a national electrical contractor servicing the electrical needs for new construction in the retirement community market. Merit Electric's dedication to quality, safety, and excellent service on each project is what sets us apart from other electrical contractors. Our projects are nationwide and long-term. If you are interested in a career managing a quality workforce, please apply within. Job Responsibilities Responsible for coordinating and managing the day to day field operations of projects, including safe work practices, workforce, materials, and equipment. Supervises, mentors, and motivates company workforce on the project. Work closely with the Project Manager to oversee and ensure the assigned scope of work is completed per customer safety, schedule, and quality requirements. Plan and lay out areas of work in advance to ensure needed allocation of daily workforce, material, and equipment. Coordinate all electrical work with general contractor and subcontractors on project. Assist Project Manager and Estimating Team with pricing of any scope changes and change orders. Monitor workforce during installations and progress to ensure quality control throughout project. Manage daily progress reports and weekly time sheets for project workforce. Receive material and verify shipment quantities match material Purchase Orders. Track company tools and equipment and ensure they are maintained in good working order. Qualifications Minimum of 5 years' experience required running large scale electrical projects. Ability to read and understand construction blueprints and schematics. Electrical license preferred but not mandatory. Must have verifiable work experience and be willing to travel. Travel package is provided. Excellent organizational skills with careful attention to detail and timely follow-through. Excellent oral communication and interpersonal skills. Must be self-directed and capable of handling multiple tasks with minimal supervision. Able to work effectively in stressful, time-sensitive environments. Strong computer skills (Word, Excel, Outlook, etc.). High standard of integrity and professionalism. Compensation: Starting at $50,000 Are you looking for an opportunity to demonstrate your abilities with a leading electrical contractor? Merit Electric is a premier electrical contractor servicing new construction for the independent living industry. At Merit Electric, we provide high quality work on each and every job, ensuring our work meets the expectations of our clients. As a leader in the electrical field we take pride in being the trade that sets the bar for others on each project. Having earned a well-respected reputation in our industry, we are in search of professionals that are highly motivated and able to carry on our reputation with our clients. If you are such an individual then we want you on our Merit Electric team!

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. As Electrical Design Engineer in the Systems Integration Group (SIG) at Micron Technology, you will contribute to the design and implementation of advanced test equipment supporting semiconductor manufacturing. You will leverage your foundational knowledge of electrical circuit theory, electromagnetism, and PCB design to assist in developing PCB assemblies and test system functions. Your role will emphasize PCB electromagnetic simulation techniques, post-layout analysis, and hands-on characterization and verification to ensure the integrity and performance of high-speed PCB designs. You will work closely with cross-functional teams, including other engineering disciplines, technicians, procurement, planning, and external partners, to support the successful implementation of innovative test solutions. Responsibilities: Participate in high-speed PCB design and verification, including electromagnetic simulation, post-layout analysis, and frequency domain tools (Keysight, HyperLynx). Perform and proceduralize S-parameter and time-domain lab measurements (TDR, eye diagrams) as part of a team. Work with design teams using schematic capture and layout tools (e.g., Siemens Xpedition) to assist in analog and digital circuit design, component selection, and PCB layout, focusing on signal and power integrity. Support debugging and verification of PCB assemblies using lab equipment (DMM, oscilloscope, power supply). Contribute to design documents, test plans, lab reports, and requirements specifications. Apply basic programming or scripting (Python preferred) for design automation and data analysis. Document, control, and manage engineering changes for PCB designs, assist with prototype qualification, deployment, and issue resolution under senior engineer guidance. Minimum Requirements: BS or MS degree in Electrical Engineering or related discipline. Familiarity with lab equipment such as DMM, oscilloscope, power supply, and electronic load instruments. Experience or familiarity with PCB schematic capture and layout tools (e.g., Siemens Xpedition, Cadence OrCAD, KiCad). Exposure to VNAs and/or TDRs. Preferred Requirements: Familiarity with 3D Field Solvers is a plus. An intermediate understanding of signal integrity and power integrity concepts. Introductory experience with scripting languages (Python preferred). A motivation to learn advanced high-speed simulation and measurement techniques As a world leader in the semiconductor industry, Micron is dedicated to your personal wellbeing and professional growth. Micron benefits are designed to help you stay well, provide peace of mind and help you prepare for the future. We offer a choice of medical, dental and vision plans in all locations enabling team members to select the plans that best meet their family healthcare needs and budget. Micron also provides benefit programs that help protect your income if you are unable to work due to illness or injury, and paid family leave. Additionally, Micron benefits include a robust paid time-off program and paid holidays. For additional information regarding the Benefit programs available, please see the Benefits Guide posted on micron.com/careers/benefits . Micron is proud to be an equal opportunity workplace and is an affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, age, national origin, citizenship status, disability, protected veteran status, gender identity or any other factor protected by applicable federal, state, or local laws. To learn about your right to work click here. To learn more about Micron, please visit micron.com/careers For US Sites Only: To request assistance with the application process and/or for reasonable accommodations, please contact Micron’s People Organization at hrsupport_na@micron.com or 1-800-336-8918 (select option #3) Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. AI alert : Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification. Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.

Adjunct Faculty are hired each semester on an as-needed basis. Adjunct Faculty are responsible for creating a learning environment that assists students in reaching their goals; and for providing effective instruction and assessment within the framework of common syllabi provided. Major Responsibilities: Facilitates student learning by delivering assigned classes in accordance with College policy and course objectives. Makes optimal use of available technology to enhance instructional methods. Develops/maintains course outlines, syllabi, lesson plans, assignments, tests, and materials. Maintains accurate student records, grades, and other requirements. Engages with students in meaningful and productive ways that impact student learning and leads to a positive experience with Ivy Tech Community College, shows evidence of developing and implementing active classroom teaching strategies focused on engaging students with their learning (curricular). Interacts with students and co-workers in a professional and cooperative manner, complies with College policies, campus guidelines and expectations. Ensures knowledge of and implements emergency and safety procedures for classrooms, labs and all learning environments.This is not to be construed as an exhaustive list. Other duties logically associated with this position may be assigned. All responsibilities will be conducted within the parameters of the Family Educational Rights and Privacy Act (FERPA), other applicable regulatory requirements, and professional standards. Supervision Received by: Department Chair of Advanced Manufacturing, Engineering and Applied Science Supervision Given: NONE. Minimum Qualifications: A qualified faculty member meets the education component of the School of Technology discipline standard through one of three routes: Possesses an earned associate or higher degree, from a regionally accredited institution directly related to the program’s discipline Or, possesses any specialized certifications required for the class being taught as indicated in the Curriculum of Record (COR) Or, four years at a journey or technician level or three years of teaching electrical courses that are specifically linked to the competencies listed in the Curriculum of Record (COR). Must have strong working knowledge of current technologies appropriate to area of instruction and meet faculty credentials as outlined in the ASOM 7.1 for the specific area(s) of instruction. We are looking for a candidate who is committed to an environment where team members feel valued, respected, and supported. The ideal candidate will demonstrate a strong commitment to a workplace culture that recognizes and appreciates varied perspectives, backgrounds, and experiences. We are seeking someone who is passionate about creating and maintaining a team dynamic that encourages open communication and mutual respect. Preferred Qualifications: Candidates should be able to the following: Describe forces that are characteristic of alternating-current systems and the application of Ohm’s law to AC circuits. Examine AC and DC motors, including the main components, circuits, and connections. List principles of human vision and the characteristics of light. Discuss the handling and installation of various types of lamps and lighting fixtures. Discuss bends in conduit up to 6 inches. Examine mechanical, hydraulic, and electrical benders. Explain how to select and size pull boxes, junction boxes, and handholes. Discuss the transportation, storage, and setup of cable reels; methods of rigging; and procedures for complete cable pulls in raceways and cable trays. Examine NEC® installation requirements for cable tray, including cable installations. Describe methods of terminating and splicing conductors, including preparing and taping conductors. Explain the purpose of grounding and bonding electrical systems. Investigate NEC® requirements. Describe fuses and circuit breakers along with their practical applications. Size circuit breakers. Examine basic descriptions of various types of contactors and relays along with their practical applications. Other Requirements: Please attach a copy of your Resume, Cover Letter, and an Unofficial copy of your Collegiate Transcripts. Work Hours: Day and evening courses available. Ivy Tech Community College is an accredited, equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, national origin, marital status, religion, sex, gender, sexual orientation, gender identity, disability, age or veteran status. As required by Title IX of the Education Amendments of 1972, Ivy Tech Community College does not discriminate on the basis of sex, including sexual harassment in its educational programs and activities, including employment and admissions. Questions specific to Title IX may be referred to the College’s Title IX Coordinator or to the US Department of Education Office of Civil Rights.

Your Impact at Lowe's As a Customer Service Associate, you combine top-notch customer service skills with genuine care for people to help customers feel comfortable while shopping at Lowe's. This is an excellent role for those who want to engage with customers and help them solve their home improvement challenges. How We Support You Whether you need a part-time position or a place to plant yourself and grow, Lowe's is ready to support your goals. As a Lowe's associate, you'll gain access to many benefits beyond competitive pay and flexible schedules. Make your well-being a priority with multiple top-tier health insurance options. Explore educational opportunities with Lowe's tuition assistance program. Take charge of your financial future with a company-matching 401(k) and optional Employee Stock Purchase Program. Gain extra savings with a 10% Associate Discount. Learn new trade skills with our Track to the Trades program. For information about our benefit programs and eligibility, please visit https://talent.lowes.com/us/en/benefits . Your Day at Lowe's As a Customer Service Associate, you will welcome customers to Lowe's and help them find the right products and services for their home improvement needs. You will interact with customers throughout the day, help them find and select products, occasionally load merchandise, and ensure all customer needs are met.While you will spend most of your time listening to customers, answering questions, and organizing merchandise, your daily responsibilities may vary by department.Customer Service Associates work in one of the following departments, based on hiring needs and skillsets: Appliances, Cabinets, Flooring, Live Nursery, Inside Garden, Hardware, Tools, Millwork, Building Materials, Plumbing, Electrical, Paint, Home Décor, Tool Rental, or Pro Services. Key Responsibilities Welcome customers to Lowe's, answer questions, and deliver friendly and professional customer service. Assist customers with locating and handling merchandise Down stock merchandise by looking for empty areas on shelves and replenishing supplies Process orders and deliveries accurately so customers receive merchandise as expected and on time Cross-functionally train in other areas of the store to help deliver the best customer service Prepare merchandise in your department based on customer needs (e.g., tint and mix paint, cut and thread pipe, cut and bundle wood, cut drywall, cut blinds) Guide customers through shopping or checkout Complete other duties as assigned Minimum Qualifications 6 Months Experience using a computer, including inputting, accessing, modifying, or outputting information 6 Months Experience using common retail technology, such as smart phones and tablets Reading, writing, and performing basic arithmetic (addition and subtraction) Able to perform duties that may require prolonged standing, sitting, and other activities necessary to perform job duties Minimally lift 25lbs unassisted or over 25lbs with or without an accommodation Preferred Qualifications 6 months of Retail and/or customer service experience Bi-lingual skills Certification in trade related to department (e.g., hardware, kitchen, plumbing, electrical, lawn and garden, and lumber/building materials) Lowe's commitment to growth and teamwork extends to the community as well. To better equip our stores and serve our communities, we strongly encourage bilingual, military, and veteran talent to apply and join our team. Travel Requirements This role does not require regular travel; however, this role may need to travel occasionally to meetings, training, or to support neighboring stores. Working Conditions Environmental factors vary by location. You may be working in both inside and outside weather conditions. Exposure to varying climates, including extreme heat or cold, wet, damp, humid, windy, or drafty conditions, is possible. You may be exposed to constant or intermittent noises in addition to moving or shaking objects and equipment.Lifting methods vary based on role, weight, and volume. Associates must follow guidelines, limiting single lifts to 75 pounds. Team lifts are used minimally starting at 75 pounds or when needed. Powered equipment should be used as required, with proper training or assistance from a trained coworker. About Lowe’s Lowe’s Companies, Inc. (NYSE: LOW) is a FORTUNE® 50 home improvement company serving approximately 16 million customer transactions a week in the United States. With total fiscal year 2024 sales of more than $83 billion, Lowe’s operates over 1,700 home improvement stores and employs approximately 300,000 associates. Based in Mooresville, N.C., Lowe’s supports the communities it serves through programs focused on creating safe, affordable housing, improving community spaces, helping to develop the next generation of skilled trade experts and providing disaster relief to communities in need. For more information, visit Lowes.com. Lowe’s is an equal opportunity employer and administers all personnel practices without regard to race, color, religious creed, sex, gender, age, ancestry, national origin, mental or physical disability or medical condition, sexual orientation, gender identity or expression, marital status, military or veteran status, genetic information, or any other category protected under federal, state, or local law.

Make a difference. As a Sales Trainee , you will learn the electrical distribution business and Graybar’s sales process through a mix of formal training sessions and hands-on learning. Our Sales Trainees are exposed to all areas of our business and are given the opportunity to receive specialized training and are provided a great overview of our industry before transitioning into a sales role. In this role you will: Learn Graybar’s sales and distribution process Develop product knowledge of electrical, communications, and security equipment Rotate through different areas of the business including sales, logistics, customer service, transactional and project processes What you bring to the table: Ability to drive and operate a motor vehicle with a valid driver's license Ability to work independently and within a team Highly effective interpersonal and communication skills 2 or 4-year degree or equivalent work experience Compensation Details: The expected pay rate for this position is starting at $24.04 per hour depending on experience. The Value of Graybar: At Graybar, we are known for our comprehensive benefits and our employee stock ownership plan! Most regular, full-time employees at Graybar may be eligible for a variety of benefits like: Multiple plan options for Medical, Dental, Vision, and Prescription Drug benefits. Life Insurance coverage for you and options for your family. Save on expenses with Flexible Spending Accounts . Enjoy our Disability Benefits at no cost to you. Share in our success with P rofit Sharing Plans . 401(k) Savings Plan with company match to help secure your future. Paid Vacation & Sick Days to spend time away from work or in case of an illness. Rest and recharge during our Paid Holidays throughout the year. Take advantage of our Paid Wellness Day to focus on preventive care and prioritize your health. Volunteer with Community Time Off to give back to the community. Predictable Work Schedules to plan your life: no weekends or nights for most roles. Celebrate your and others' achievements with our Employee Recognition Program . Reach your career goals with our Educational Reimbursement and Career Development Programs . And More Perks that support your well-being and career growth. Benefit eligibility may vary across locations and roles, so be sure to check in with your recruiter for more information. Why should you join Graybar? At Graybar, our employees are the heart and soul of our company. We believe that employees with diverse perspectives bring the ideas and innovative thinking we need to solve our biggest challenges and compete in an ever-changing world. Consistent with our values, we welcome people from all backgrounds, cultures and experiences into our company because we believe it’s the right thing to do and the right way to run our business. We want each of our employees to know that they matter and to feel a sense of belonging, ownership and inclusion at Graybar. We believe that everyone should be treated with dignity and respect, and we work to build a collaborative environment where our employees have the opportunity to grow, learn and make a difference, both as individuals and as part of the team. That’s what our employee ownership culture is all about: working as one team and moving forward together, while honoring the unique value each person brings to our company. Apply now and find out what’s next for you. Equal Opportunity Employer/Vet/Disabled Not the right fit? Let us know you're interested in a future opportunity by clicking Introduce Yourself in the top-right corner of the page or create an account to set up email alerts as new job postings become available that meet your interest!

Senior Electrical Engineer At Salas O’Brien we tell our clients that we’re engineered for impact. This passion for making a difference applies just as much to our team as it does to our projects. That’s why we’re committed to living our values every day: inspiring, achieving, and connecting as shared owners of our success with a focus on a sustainable future. Building for the long-term means that all of our team members can expect to work on amazing projects with a people-first approach to problem solving. It also means that each member of our team has truly limitless potential to build a unique, meaningful, and high-impact career—and they’ll receive great total rewards along the way. About Us: Founded in 1975, Salas O’Brien is an employee-owned engineering and professional services firm focused on achieving impact for our clients, our team, and the world. We know that tomorrow’s requirements are today’s opportunities, and we are here to design lasting solutions for pressing challenges. We work across a variety of industries providing integrated engineering and consulting services. Our specialized experience includes design for data centers, healthcare, science and technology, high-rise buildings, clean energy, education, and other building types as well as structural and building sciences, infrastructure asset management, advanced robotics, and more. Our technical expertise is paired with an exceptional team of business development, human resources, finance and accounting, information technology, and marketing professionals, all of whom play a key role in bringing our commitments to life every day. Job Summary The Senior Electrical Engineer will work in a fast-paced multi-discipline team environment and will be responsible for designing building electrical systems and producing construction documentation for commercial projects, higher education, state and local government projects, multi-family housing projects and healthcare projects. We are looking for a highly motivated Senior Electrical Engineer to be part of our firm. General Duties: Design medium and low voltage systems including distribution, lighting, power, and fire alarm. Develop electrical and lighting system calculations and controls. Prepare detailed design documents using Revit. Perform QA/QC reviews and ensure code compliance. Coordinate with owners, architects, engineers, clients, and regulatory officials. Guide junior engineers and conduct site investigations. Review shop drawings and support construction services. Qualifications: You have a minimum of 10 years design experience as a designer or registered engineer. You have a bachelor’s degree in electrical engineering or a related field. You have experience with electrical systems and projects. LEED experience or certification is a plus. You are familiar with codes, standards and design guidelines. Skills: Proficient working knowledge of the National Electrical Code and NFPA. Proficient working knowledge of Building Codes. Excellent work ethic and attitude. Interpersonal communication skills, combined with organizational skills, the ability to plan, balance and prioritize work. Ability to lead a team as well as work as part of a team. Proficient in AutoCad, Revit and MS Office. Location : Richmond, VA This role is also eligible for performance-based bonuses and a comprehensive U.S. based benefits package, including: Medical, dental, and vision insurance 401(k) with company match Paid time off and company holidays Wellness programs and employee assistance resources Professional development support For more information, visit our full benefits overview here - salasobrien.com/benefits Third-Party Agency Notice Salas O’Brien does not accept unsolicited resumes from external recruiters or agencies. We only work with approved partners engaged directly by our Talent Acquisition team for specific searches. Unsolicited submissions will not be eligible for placement fees. Equal Opportunity Employment Statement Salas O’Brien provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state/provincial, or local laws. Salas O’Brien will accommodate the disability-related needs of applicants as required by law.

Are you ready? As an Outside Sales Representative, you will be selling our products and services in a specialized market. You will develop new prospects and maintain contact with established customers, regularly visiting them at their site of business or other off-site locations. In this role you will: Responsible for meeting or exceeding assigned annual gross margin budget by promoting and selling products in assigned territory in compliance with the Company's pricing policies Handle customer complaints promptly and effectively, and report potential claims Keep management informed of local competition and market conditions Carry out sales and merchandise programs as directed, and recommend new items for stock Maintain current customer records, files, and reports of business transactions; assist in collection of past due accounts Participate in training sessions, trade shows, and sales meetings as requested. Demonstrate products after sale when necessary What you bring to the table: Minimum 3 years industry-specific experience required; 4+ years experience preferred 4 year degree preferred Knowledge of business administration, sales, and marketing Negotiation skills Ability to learn our business and to work independently to achieve goals Ability to sell and be persuasive Extensive travel required, including some overnight travel. Compensation Details: The expected starting rate of pay for this position is $65,700 annually, depending on experience. This position is also incentive eligible, based on specific and relevant business metrics. The Value of Graybar: At Graybar, we are known for our comprehensive benefits and our employee stock ownership plan! Most regular, full-time employees at Graybar may be eligible for a variety of benefits like: Multiple plan options for Medical, Dental, Vision, and Prescription Drug benefits. Life Insurance coverage for you and options for your family. Save on expenses with Flexible Spending Accounts . Enjoy our Disability Benefits at no cost to you. Share in our success with P rofit Sharing Plans . 401(k) Savings Plan with company match to help secure your future. Paid Vacation & Sick Days to spend time away from work or in case of an illness. Rest and recharge during our Paid Holidays throughout the year. Take advantage of our Paid Wellness Day to focus on preventive care and prioritize your health. Volunteer with Community Time Off to give back to the community. Predictable Work Schedules to plan your life: no weekends or nights for most roles. Celebrate your and others' achievements with our Employee Recognition Program . Reach your career goals with our Educational Reimbursement and Career Development Programs . And More Perks that support your well-being and career growth. Benefit eligibility may vary across locations and roles, so be sure to check in with your recruiter for more information. Why should you join Graybar? At Graybar, our employees are the heart and soul of our company. We believe that employees with diverse perspectives bring the ideas and innovative thinking we need to solve our biggest challenges and compete in an ever-changing world. Consistent with our values, we welcome people from all backgrounds, cultures and experiences into our company because we believe it’s the right thing to do and the right way to run our business. We want each of our employees to know that they matter and to feel a sense of belonging, ownership and inclusion at Graybar. We believe that everyone should be treated with dignity and respect, and we work to build a collaborative environment where our employees have the opportunity to grow, learn and make a difference, both as individuals and as part of the team. That’s what our employee ownership culture is all about: working as one team and moving forward together, while honoring the unique value each person brings to our company. Apply now and find out what’s next for you. Equal Opportunity Employer/Vet/Disabled Not the right fit? Let us know you're interested in a future opportunity by clicking Introduce Yourself in the top-right corner of the page or create an account to set up email alerts as new job postings become available that meet your interest!

JOB FUNCTION: Install, maintain , test, startup, and adjust a wide variety of electrical, electronic, electro pneumatic, and electro-mechanical instrumentation and control systems/equipment. specific electrical and controls (E&C) systems include, but are not limited to, those associated with the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. MAJOR DUTIES AND RESPONSIBILITIES: Read, interpret, and troubleshoot site E&C system deficiencies using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&IDs). Troubleshoot indiscriminately both the mechanical and electrical sides of systems. Maintain as-built logics, control loop diagrams, and documentation for all assigned systems. Install, program, troubleshoot, calibrate, tune, preventive and predictive maintenance (condition monitoring), replace and repair all assigned E&C systems and all associated electrical, electronic, electro pneumatic, and electro-mechanical components, including instrumentation and end-elements. Troubleshoot hardware and software problems; perform simple programming, data base changes, and alarm log reviews; perform and maintain system back-ups and history database files; develop and install graphics to enhance operation and maintenance; and perform miscellaneous administrative functions as directed by E&C Engineer on site’s microprocessor-based central control systems. Program and troubleshoot ladder logic, both in hard-wired relays and PLC, for control systems. Adjust control system parameters as and/or directed by E&C Engineer. Perform startup and checkout of newly installed E&C systems prior to operations turnover. Complete ADC’s as . Direct repair personnel as assigned. Provide technical support as to the E&C Engineer in the performance of his/her duties. Perform all other duties as assigned. REQUIRED QUALIFICATIONS : Journeyman Electrical License. Working experience in electrical, industrial electronics, and electro-pneumatics. Ability to read, interpret, and troubleshoot using electrical schematics, loop diagrams, control logics, mechanical drawings, and piping & instrument diagrams (P&ID’s). Five years working experience with 120VAC. Working knowledge of PLC programming. Must be able to read, interpret, and troubleshoot ladder logic from computer terminal. Knowledgeable in direct digital control (DDC) and other forms of electronic controls. Hands-on experience in calibration and maintenance of electronic and / or electro-pneumatic control system equipment. Hands-on experience in repair and troubleshooting of motor control centers and variable frequency drives (VFD’s). Ability to quickly learn operating and control systems for principal site-specific systems including, but not limited to, the electrical distribution system, turbine generators, chillers, boilers, incinerators, and HVAC equipment. Ability to comprehend written and oral instructions. A willingness to work rotational shift if necessary, including days, evenings, and nights, as well as, overtime, on-call, call-ins, weekends, and holidays. EXPERIENCE: Two years’ experience in maintenance and repair on commercial/industrial/residential building equipment to include, but not limited to: cooling towers, pumps, heat exchangers. Two years working experience with high voltage up to 15,000VAC, preferred. EDUCATION : High school, technical school, apprenticeship, trade school graduate or equivalent required. PREFERRED QUALIFICATIONS: Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Understanding of Distributed Control Systems (DCS) and SCADA, preferred. Understanding of HVAC building management systems (BMS), preferred. NFPA-70E Training. OSHA 10 Training. CPR Training. Certified and proficient in Foxboro computer systems to include hands-on and / or classroom experience, preferred. SECURITY: M ust be a U.S. Citizen, able to obtain and maintain a Top-Secret Security Clearance. PHYSICAL DEMANDS: Incumbents may work in conditions that require operating industrial machinery/power tools and motor vehicles. Additionally, incumbents may participate in work that requires walking, bending, squatting, and carrying materials throughout the facility. Workplace conditions necessitate following strict safety guidelines and the use of Personal Protective Equipment. Work tasks requiring the incumbent to lift weight more than 50 pounds requires two or more persons. The physical demands described here are representative of those that an employee may perform on an occasional to regular basis while performing functions of this job. The work environment characteristics describe here are representative of those an employee may encounter on an occasional to regular basis while performing the functions of this job. Reasonable accommodations may be made to enable individuals to perform these functions. The Government has full and complete control over granting, denying, withholding, or terminating security clearances for Contractor employees. Decisions on clearance requirements for positions will ultimately be decided by the customer based on access and requirements. It is the responsibility of the Contractor to ensure these decisions are approved and executed based on the customers guidance. NOTE: T he job description is not intended to be all-inclusive. Employees may be assigned other job-related Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters .

Be visionary Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. ​ We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. Job Description Job Summary: Our Electrical Engineering Manager will be responsible for leading an innovative and high performing team of electrical engineers and FPGA designers on projects ranging from short technology investigations to full end-to-end high-volume product development. You'll also be deeply involved in technical work including prototyping and modeling, schematic design, PCB layout, and testing. Primary Duties & Responsibilities: Enabling, maintaining, and improving the process used in the EE department to develop circuit boards and FPGA code. Staffing development projects with engineers having the appropriate skill sets and experience. Identification of, and investment in, new technologies, design tools and methodologies needed to keep Teledyne FLIR’s products in market leading positions. Hiring new employees and consultants Providing technical oversight and support for all EE projects and engineers Ability to backstop most projects or engineers, i.e. deep technical capability renewed by periodic hands-on use Career development, assessment and ongoing education for staff across all experience levels Coordination of EE support for products in production (trouble shooting of failures beyond the scope of manufacturing engineering, and non-trivial component obsolescence) Job Qualifications: Bachelor’s degree (required), Master’s degree desired Minimum of 8 years experience as an Electrical Engineer or Firmware Engineer Experience successfully leading highly innovative and productive teams desired Excellent project problem-solving skills Excellent written & verbal communication skills Familiarity with project management tools and methodologies desired (Microsoft Project, JIRA JWM) Ability to travel occasionally Experience identifying, planning, coordinating, managing and executing the electrical features of new product developments Successful design of products that have entered high rate production and experience working with offshore contract manufacturers Expertise in all phases of electrical product development Proven ability to manage a diverse team, providing technical guidance to product development, engineering, and operations Successful development of direct reports, enhancing their professional skills and setting strategic goals & deliverables Experienced with building and implementing product development processes that enhance and support a nimble environment Desired experience in any of the following: infrared cameras or systems, imaging sensor integration, automotive electronics, electronics miniaturization, design for harsh environments. Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. Required Competencies: Attention to Detail Required to ensure all aspects of a design are addressed and to ensure the electronics are sufficiently qualified prior to deliver to the customer. Collaboration & Teamwork Required to bring group members together to produce their best work as well as building cross discipline respect and understanding. Communication Skills/Presentation Skills Strong verbal (including listening) skills are required when interfacing with engineers, program managers, etc. and third party design bureaus. Effective written skills are required to convey design information, generate proposals, statements of work and presentations. Innovation Desired to advance company policies and procedures to help create efficiency and a work environment that stimulates employees with new ideas. Continuous Learning Desired to increase the individual’s technical value to the electrical engineering group and the organization. Management study also desired to become a more effective manager/leader. Decision Making & Problem Solving These skills are required to objectively express engineering trade-offs to the team and make decisions that encourage long term advancement of the electrical engineering group and ensure stated objectives are met. Flexibility Required continually evaluating group processes and methodology and making changes when necessary. Manager must not stand in the way of change that can empower employees and advance the corporation. Initiative Desired in a manager that provides leadership and direction through his/her own actions. Organization, Planning & Execution Required to effectively manage multiple projects being performed by multiple individuals. Proper organization and planning lead to good execution Preferred Education & Background Bachelor’s degree or greater in Electrical Engineering preferred. Other degrees with relevant electrical engineering design experience will be considered Applicants must be either a U.S. citizen or legal permanent resident. Salary Range: $141,900.00-$189,200.000 Pay Transparency The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. ​

The Rosemary Power Station is a sophisticated combined-cycle facility with a capacity of 160 megawatts (MW). This state-of-the-art plant efficiently combines oil-fired combustion turbines with a steam turbine, ensuring maximum energy output while minimizing environmental impact. It serves as a reliable source of electricity during peak demand, contributing significantly to the region's energy security. With a strong commitment to environmental responsibility, the Rosemary Power Station adheres to strict emissions controls and regulations. Opportunity Summary The Instrumentation, Controls, and Electrical (IC&E) Technician plays a critical role in ensuring the efficient and reliable operation of our power plant. The IC&E Technician is responsible for a diverse array of tasks, including calibrating, testing, maintaining, and troubleshooting instrumentation, control systems, and electrical equipment. They ensure strict adherence to safety protocols and industry standards while collaborating with various departments, installing new equipment, and meticulously documenting maintenance activities. Their role is crucial in minimizing downtime and optimizing the performance of our power facility. Your scope of responsibility as Instrumentation, Controls, and Electrical (IC&E) Technician includes the following primary functions: Calibrates, tests, maintains, troubleshoots, and installs all power plant instrumentation, control systems, and electrical systems. This includes, but is not limited to, control valves, variable speed drives, motors, battery chargers, inverters, transmitters, various analyzers, shop calibration equipment, and instrumentation specific to natural gas-fired combined cycle plants, such as combustion turbines, HRSGs, and Steam Turbines. Performs corrective, preventive, predictive, and emergency maintenance on electrical systems in modern power stations, covering 13.8KV and 4160-volt switchgear, motors, control centers, transformers, batteries, inverters, chargers, and main generator and excitation equipment. Maintains, troubleshoots, and optimizes Allen Bradley PLC systems in the power plant. Performs inspections, diagnoses faults, and fine-tunes PLC programs for efficient operation. Collaborates with engineers to enhance PLC logic for improved performance. Coordinates with other departments to ensure efficient maintenance operations and minimize downtime. Installs new equipment and modifications as assigned, ensuring compliance with safety protocols and industry standards. Maintains, cleans, and properly stores shop equipment and tools, including specialized tools for instrumentation and electrical maintenance. Keeps detailed logs and records of problems, repairs, or downtime and updates plant drawings, databases, vendor information, calibration information, and other forms of station documentation accurately. Implements safe working practices, immediately identifies hazards, and recommends and/or implements repairs to maintain a safe working environment. Assists the Plant Engineer in performing and evaluating plant tests, including tests related to turbine controls, combustion control processes, and boiler control systems. Works with outside contractors during overhauls or other times, as required, providing technical guidance and oversight on plant instrument and control-related work. Handles and properly disposes of hazardous waste products such as batteries and fluorescent bulbs in accordance with safety regulations. Performs other tasks as assigned by management to support the efficient operation of the power facility. Effectively utilizes Maintenance Management System (MMS) to ensure historical repair and PM records are maintained on equipment, instruments, assets, etc. SAP is used as the MMS at the Rosemary Power Station. NAES Safe Safety is a core value at NAES, and as a condition of employment, all employees are expected to remain mentally alert and work safely at all times. Employees must also adhere to all safety warnings and posted signs while on company property. Additionally, they are required to follow all NAES safety rules and procedures. Adherence to these safety responsibilities is one of the key factors in the evaluation of each employee’s performance. Working Relationships The IC&E Technician reports directly to the Plant Manager, and coordinates with all other plant personnel. Physical Requirements and Working Conditions Physical requirements include standing for extended periods of time, climbing stairs and ladders, working from elevated platforms and walkways at varying heights, and routinely lifting up to 50 pounds. Power plant environment that may involve entering confined spaces, crawling through narrow areas, and handling hazardous materials, with exposure to fumes, extreme temperatures, and noise. Work may include high heat near equipment and varying outdoor weather conditions. Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection. Fit testing for respirators may be required. Strict smoking restrictions apply in and around the facility. Fitness for Duty All personnel will participate in the Fitness for Duty Program, which includes a post-offer physical examination, drug screening, and post-employment random drug screening. Work Schedule The IC&E Technician works a standard Monday to Friday day shift schedule, ensuring consistent plant operation and support during regular business hours. This position will occasionally necessitate extended working hours and flexible shifts as needed, including weekends and holidays, in response to schedules, workload demands, and plant conditions. Periodic callouts or “On call” status may also be required. Compensation This position offers a base pay rate ranging from $42.23 to $51.50 per hour, along with an annual performance bonus. Qualifications and Technical Competencies We are looking for a skilled Technician with experience in power generation operations and maintenance, coupled with a proven ability to contribute effectively to team success and consistently meet performance standards. Ability to understand procedures and instructions related to the assigned area, typically acquired through four years of high school. An Associate degree in power plant technology, a related technical field, or engineering is preferred. Relevant industry or military experience may be considered in lieu of education on a year-for-year basis. Prior experience in power plants or industrial settings preferred, demonstrating familiarity with operations, safety protocols, and industry-specific equipment. Thorough knowledge and hands-on experience in troubleshooting and repairing electrical systems in modern power stations, covering 13.8KV and 4160-volt switchgear, motors, control centers, transformers, batteries, inverters, chargers, and main generator and excitation equipment. Proficient in maintaining and troubleshooting instrumentation systems specific to natural gas-fired combined cycle plants, including combustion turbines, HRSGs, and Steam Turbines. Understanding of burner management systems, combustion control processes, and boiler control systems for maximizing efficiency and safety during power generation. Hands-on expertise in turbine controls, encompassing start-up, shutdown, and operational adjustments, to ensure peak performance and reliability of steam turbine systems. Familiarity with Allen Bradley PLC and instrumentation, essential for maintaining and optimizing control systems. Skilled in performing routine inspections and preventive maintenance tasks on critical electrical equipment to ensure reliable operation and safety compliance. Comprehensive knowledge and practical experience in troubleshooting and repairing instrumentation used in power stations, covering burner management, combustion control, boiler controls, turbine controls, and machine condition monitoring. Strong writing and analytical skills for presenting facts, conclusions, and recommendations in written communications. Excellent oral communication skills and strong mathematical aptitude for conveying technical information effectively. Must possess a valid, unrestricted U.S. driver’s license and ensure it remains in good standing at all times. About NAES NAES Corporation is a leading provider of operations, maintenance, and engineering services for energy facilities. We have built a reputation as a reliable partner for clients in North America and internationally, offering services across the power generation, oil and gas, and renewable energy sectors. Our growing family of companies allows us to address the entire life cycle of power generation and other industrial plants. NAES is committed to fostering a diverse and inclusive workplace. We prioritize selecting employees based on merit and competence, seeking individuals of the highest quality, without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, military status, or affiliation protected under USERRA, or any other form of discrimination prohibited by applicable local, state, and federal law.

AST SpaceMobile is building the first and only global cellular broadband network in space to operate directly with standard, unmodified mobile devices based on our extensive IP and patent portfolio and designed for both commercial and government applications. Our engineers and space scientists are on a mission to eliminate the connectivity gaps faced by today’s five billion mobile subscribers and finally bring broadband to the billions who remain unconnected. Position Overview We are seeking an experienced Electrical Engineer to join our team. This role involves working closely with senior engineers to design and test electrical harnesses for satellites and associated ground support equipment. The ideal candidate is detail-oriented, collaborative, and eager to contribute to cutting-edge aerospace projects. Key Responsibilities Collaborate with engineering teams to design, test, and support the integration of electrical harnesses for spacecraft and ground systems. Create detailed electrical schematics, select wiring, connectors, back shells, and other harness components, ensuring compliance with company and industry standards. Develop and execute test plans to verify functionality, reliability, and performance of electrical harness systems. Conduct thorough testing and validation procedures, analyze test data, and troubleshoot issues to meet design requirements. Prepare comprehensive technical documentation, including interface control documents, system schematics, block diagrams, harness drawings, and installation procedures. Work closely with multidisciplinary teams (power, RF, command and data handling, and other subsystems) to ensure seamless integration of electrical systems. Qualifications Education: Bachelor’s degree in electrical engineering, Mechanical Engineering, or a related field. Experience: A minimum of 2 to 5 years of industry experience. Preferred Qualifications Knowledge of space environment and industry standards. Understanding of harness design principles, cable routing, shielding, and EMI/EMC considerations. Proficiency in CAD software for harness design (e.g., Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics). Experience with electrical simulation and analysis tools (e.g., SPICE, MATLAB). Prior experience in electrical harness design through internships, co-op programs, or academic projects related to aerospace engineering. Soft Skills Strong interpersonal skills and ability to collaborate effectively within cross-functional teams. Excellent written and verbal communication skills. Analytical mindset with strong problem-solving and troubleshooting abilities. Ability to think critically, propose creative solutions, and adapt to evolving project requirements. Meticulous attention to detail to ensure accuracy in documentation and design. Technology Stack CAD tools: Autodesk Inventor, AutoCAD Electrical, CATIA, Mentor Graphics. Electrical simulation tools: SPICE, MATLAB. Familiarity with schematic capture tools. Physical Requirements Ability to work in a standard office environment and use a computer for extended periods. Occasional hands-on work with hardware in lab environments. This job description may not be inclusive to the duties and responsibilities listed. Additional tasks may be assigned to the employee from time to time or the scope of the job may change as needed by business demands . AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Decima International is a professional services company, providing project management and controls services to clients in the United States and the Middle East. Our mission is to become the premier professional services provider across all industry sectors we are engaged in. To accomplish this, Decima International’s founders established a simple yet powerful formula: Approach each client engagement as a partnership , create an environment that attracts the most talented professionals and allows them to flourish, and regulate growth to maintain excellence in our service standards. If you are interested in a long and rewarding career working with high-profile clients on some of the most challenging projects in the world, then Decima is where you belong. At Decima, you will be able to explore incredible growth and professional development opportunities. We are looking for a driven and capable Electrical QA Inspector to support us with the development of multiple hyperscale data center projects for one of our top technology clients. This is a client-facing role that requires strong interpersonal, communication and organizational skills, ability to self-direct, client representation, and an emphasis on strong project management fundamentals. Must be able to manage multiple projects concurrently. A strong background in data center development, design, engineering, controls, and operations requirements is a big plus. You will play an integral role in ensuring the development and implementation of the Quality Management System (QMS) in addition to the coordination, performance, and completion of all construction audits and commissioning services of the project. The Electrical QA Inspector is accountable for the quality of work performed, compliance with building codes, safety regulations, as well as meeting the project’s contractual requirements set forth by the client. We are looking to bring in dedicated individuals with a passion for innovation and talent for multitasking in a fast-paced environment. We will help you grow, pursue, and fulfill what inspires you so we can make big impacts on the world, together. RESPONSIBILITIES Understand the project scope and requirements. Ensure compliance with quality standards, building codes, safety regulations, and environmental guidelines. Review and verify material submittals for A/E and Client approval. Confirm delivered materials match approved submittals. Manage and review submittals, RFI logs, maintenance logs, and other project documents promptly. Update QC punch lists and coordinate with general contractors (GC) and subcontractors for completion. Conduct internal quality audits and site inspections. Adhere to Quality, Health, Safety, & Environment (HSE) standards. Provide technical support to address operational challenges and client concerns. Plan and inspect Definable Features of Work (DFWs). Develop and implement Audit and Test Plans for quality inspections and testing. Maintain and update Quality manuals, checklists, and forms. Collaborate with third-party QA/QC firms as needed. Participate in Quality Management System (QMS) audits. Build relationships with project partners, consulting engineering firms, public agencies, and clients. Ensure document control compliance and maintain project submittal logs and quality control reports. Verify and document material compliance with approved submittals. Compile and forward project closeout documents, including O&M manuals, as-builts, and warranties. Investigate and address non-conformance issues promptly. Ensure calibration of inspection, measurement, and test equipment. Liaise with the General Contractor, Client, and Project Management team to resolve quality issues. Prepare presentations on progress, findings, and recommendations for management. Review subcontractors’ submittals for compliance. Coordinate and monitor subcontractors, suppliers, direct labor, and materials. Collaborate with public utility suppliers for final service connections. Coordinate activities of inspection agencies. Achieve required MEPS and electromechanical inspections. Assist in preparing periodic QA/inspection progress reports. Review and approve subcontractor work percentages. Oversee commissioning processes. Manage the MEP project closeout to ensure all requirements are met. QUALIFICATIONS Required Qualifications : 15+ years of construction and quality management experience. Bachelor’s degree in mechanical, electrical engineering, or a related field. Experience with managing field engineering, inspection, and NDE related to all QA/QC functions. Proficient with reading, understanding, and interpreting plans, specifications, drawings, contracts, and other documents pertaining to MEP aspects of projects. Ability to develop and manage non-conformance, defects, and reporting programs, including root cause analysis. Ability to ensure correct codes, standards, job specifications, project procedures, and federal and provincial regulations are properly identified, correctly specified in detail, and met or exceeded. Ability to work in high-production environments and respond quickly and effectively under pressure and deadlines while maintaining a professional demeanor. Technical knowledge of materials and construction concepts. Experience working as an Electrical Quality Supervisor for large commercial, industrial, or mission-critical facilities construction projects. An excellent understanding of construction Quality Management Systems (QMS). Familiarity with punch list procedures and project closeout processes. Strong attention to detail and excellent analytical skills. Strong knowledge of high, medium, and low-voltage systems, HVAC, control systems, commissioning, LEED/Green building projects, and general ground-up construction projects as applicable to MEPS. Preferred Qualifications: Project Management Professional (PMP) certification. Construction Quality Manager Certification (CCQM) US Army Corps of Engineers (USACE) Certified Quality Auditor (CQA) Member of the American Society for Quality Six Sigma Certifications ISO 9001 Green Business Certification (LEED) Strong background in data center development and construction POSITION DETAILS: Primary Location (On-site): Phoenix, Arizona Position: Electrical QA Inspector Position Classification: Salary-based full-time hours Current US work permit required. This position does not offer sponsorship for employment (e.g., H-1B visa sponsorship or transfer not offered) PRODUCTIVITY TOOLS: ​ Microsoft Office Microsoft 365 CxAlloy Decima International is an Equal Opportunity Employer who is committed to the safety and wellbeing of all. All qualified applicants will receive consideration for employment without regard to race, religion, creed, color, national origin, ancestry, sex (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, medical condition, marital or domestic partner status, sexual orientation, gender, gender identity, gender expression and transgender status, mental disability or physical disability, genetic information, military or veteran status, citizenship, low-income status or any other status or characteristic protected by applicable law. At Decima International, we offer a competitive salary package, including paid time off and performance-based bonuses. We also provide excellent medical, vision and dental insurance for our employees.

Electrical Engineer Company: The Boeing Company Boeing Defense, Space & Security (BDS) seeks an Electrical Engineer to provide Design Authority engineering change support for a large Test Equipment, Tool, Jig, and Fixture project for our Defense and Space Systems team in Heath (Columbus), OH. Our team is expanding in system design, development, integration and test of aircraft , missile , weapons , and autonomous Guidance Navigation and Control ( GNC ). Position Responsibilities Include: Perform and document analyses to validate and verify that systems and components meet requirements and specifications. Review and maintain electrical system and test equipment component designs using 3-D Computer Aided Design tools, Geometric Dimensioning and Tolerancing ( GD&T ) standards, or other design methods. Provide product definition to other engineering groups, repair operations, suppliers, and external customers throughout the product lifecycle. Perform electrical engineering evaluations of proposed design changes to include detailed test equipment design , testing requirements, component and hardware selection, schematics, interface, and requirement interpretations and updates. Support development, maintenance, or modification of system, component, and installation designs and proposals to provide design documentation to downstream groups. Support the development and documentation of Printed Circuit Boards ( PCB ), cabling, and obsolete part substitutions. Contribute to supplier development and test and production activities. Support system component designs, proposals standards, and installation and detail documentation. This position is hybrid, meaning that you will perform some work onsite in Heath, OH. The time worked on site is at the hiring team’s discretion and can change. This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim or final U.S. Secret clearance post-start is required. Basic Qualifications (Required Skills/Experience): Years of related experience: 1+ for level 2, 3+ for level 3. Experience reading and interpreting engineering drawings , technical orders, process specifications, and retrofit requirements to perform electrical modifications and repairs. Experience designing, developing, testing, qualifying electrical systems and electronic systems . Bachelor of Science degree from an accredited course of study in engineering, engineering technology (including manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. Preferred Qualifications (Desired Skills/Experience): Active clearance. Experience with electrotechnical product testing and Test Equipment Design and repair. Guidance system experience. GNC. Experience applying industry and company standards to design documentation. Experience working with USAF or US Government. Experience developing and documenting requirements. Experience with Very High-Speed Integrated Circuit (VHSIC) Hardware Description Language ( VHDL ). Experience with Mentor Graphics ( Siemens ). Experience with PSpice . Prior nuclear critical communication equipment development experience. Prior Minuteman III ICBM weapon system experience. Typical Education & Experience : Level 2: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 2 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Level 3: Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 5 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard. Pay & Benefits : At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary Pay Range: Level 2: $79,900 to $108,100 Level 3: $97,750 to $132,250 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

WHO IS JLM STRATEGIC TALENT PARTNERS & WHAT IS OUR ROLE We partner with National & International prime contractors to provide them with qualified talent they can trust. We accomplish this by sourcing & vetting high level career seeking candidates in the industry and match them with our partners current open roles. Our objective is to help our general contractor partners build out project teams for high level infrastructure projects across the US. We aspire to partner with candidates who are eager to learn, grow, and progress in their career path while deepening their knowledge in their given field. We deeply value our partnerships and place great emphasis on maintaining strong relationships and long term hires.This is reflective in our competitive offerings to our hires including: Ongoing HR support Competitive benefits packages including- Health, Dental, Vision & Life insurance Our very own JLM Rewards incentive program THE IDEAL CANDIDATE The ideal candidate has a proven track record of project engineering and civil construction work. They thrive in a fast paced and a team oriented environment. They get excited about construction projects as well as completing assignments on time. An individual who will do well in this position is self oriented, organized, a great communicator, and approachable. Comfortable working within a team environment at the project site. K EY RESPONSIBILITIES/SKILLS Act as Company representative to our existing customers. Provide management of existing projects including creating submittals, workplans, all reporting, responsibility for project P&Ls and supporting payroll certification documents. Meet with engineering and field crews to review production schedule and confirm all materials Interface with General Foreman to insure safe, efficient & effective adherence to the job workplan and scope Work to develop estimates through review of drawings, specifications, site visits, and subcontractor reviews and scope development meetings. Accomplishes construction objectives by scheduling, communicating job expectations; planning, monitoring adhering to policies and procedures. Meets construction operational standards by development of plans and schedules. Meets construction financial standards by providing budget information; monitoring expenditures; identifying variances; implementing corrective actions. Prepares construction projects by verifying estimates, project drawings, and specifications; establishing and disseminating schedules; awarding contracts; specifying materials and supplies. Completes construction projects by directing construction requirements; comparing construction results to plans; resolving problems. Work well with PM’s and assist on current projects with all related materials and equipment orders. Provides construction progress reports by collecting, analyzing, and summarizing construction and budget data and trends. Avoids legal challenges by understanding and enforcing regulations; recommending new procedures Other duties as assigned Knowledge, Skills, and Abilities Required : 5 years of verifiable field experience (combination of field and office acceptable) Complete knowledge of current electrical codes, standards and practices Ability to read and interpret plans and drawings Complete knowledge of jobsite safety requirements and OSHA standards and practices Proven computer proficiency accompanied by a strong aptitude for technical applications (proficient in MS Office, Google applications, project management software such as ESub and Procore, Adobe, and ability to learn and operate new software. Experience with Bluebeam a plus.) PERKS OF JOINING JLM We offer a competitive compensation package as well as benefits including Health Insurance, Vision, Dental, Life, and Paid Time Off! Compensation: $40.00 - $70.00 per hour JLM is a DBE-accredited agency specializing in finding world-class talent and managing infrastructure project staffing needs. As the industry leader in staffing for architecture, engineering, and construction projects, JLM has 18,500+ pre-vetted, highly-skilled, and available people ready to power your project within 7 days.

Benefits: 401(k) matching Opportunity for advancement Paid time off WHO IS JLM STRATEGIC TALENT PARTNERS & WHAT IS OUR ROLE We partner with National & International prime contractors to provide them with qualified talent they can trust. We accomplish this by sourcing & vetting high level career seeking candidates in the industry and match them with our partners current open roles. Our objective is to help our general contractor partners build out project teams for high level infrastructure projects across the US. We aspire to partner with candidates who are eager to learn, grow, and progress in their career path while deepening their knowledge in their given field. We deeply value our partnerships and place great emphasis on maintaining strong relationships and long term hires.This is reflective in our competitive offerings to our hires including: Ongoing HR support Competitive benefits packages including- Health, Dental, Vision & Life insurance Our very own JLM Rewards incentive program THE IDEAL CANDIDATE The ideal candidate has a proven track record of project engineering and civil construction work. They thrive in a fast paced and a team oriented environment. They get excited about construction projects as well as completing assignments on time. An individual who will do well in this position is self oriented, organized, a great communicator, and approachable. Comfortable working within a team environment at the project site. K EY RESPONSIBILITIES/SKILLS Act as Company representative to our existing customers. Provide management of existing projects including creating submittals, workplans, all reporting, responsibility for project P&Ls and supporting payroll certification documents. Meet with engineering and field crews to review production schedule and confirm all materials Interface with General Foreman to insure safe, efficient & effective adherence to the job workplan and scope Work to develop estimates through review of drawings, specifications, site visits, and subcontractor reviews and scope development meetings. Accomplishes construction objectives by scheduling, communicating job expectations; planning, monitoring adhering to policies and procedures. Meets construction operational standards by development of plans and schedules. Meets construction financial standards by providing budget information; monitoring expenditures; identifying variances; implementing corrective actions. Prepares construction projects by verifying estimates, project drawings, and specifications; establishing and disseminating schedules; awarding contracts; specifying materials and supplies. Completes construction projects by directing construction requirements; comparing construction results to plans; resolving problems. Work well with PM’s and assist on current projects with all related materials and equipment orders. Provides construction progress reports by collecting, analyzing, and summarizing construction and budget data and trends. Avoids legal challenges by understanding and enforcing regulations; recommending new procedures Other duties as assigned Knowledge, Skills, and Abilities Required : 5 years of verifiable field experience (combination of field and office acceptable) Complete knowledge of current electrical codes, standards and practices Ability to read and interpret plans and drawings Complete knowledge of jobsite safety requirements and OSHA standards and practices Proven computer proficiency accompanied by a strong aptitude for technical applications (proficient in MS Office, Google applications, project management software such as ESub and Procore, Adobe, and ability to learn and operate new software. Experience with Bluebeam a plus.) PERKS OF JOINING JLM We offer a competitive compensation package as well as benefits including Health Insurance, Vision, Dental, Life, and Paid Time Off! Compensation: $40.00 - $50.00 per hour JLM is a DBE-accredited agency specializing in finding world-class talent and managing infrastructure project staffing needs. As the industry leader in staffing for architecture, engineering, and construction projects, JLM has 18,500+ pre-vetted, highly-skilled, and available people ready to power your project within 7 days.

Job Description At General Motors, our product teams are redefining mobility. Through a human-centered design process, we create vehicles and experiences that are designed not just to be seen, but to be felt. We’re turning today’s impossible into tomorrow’s standard —from breakthrough hardware and battery systems to intuitive design, intelligent software, and next-generation safety and entertainment features. Every day, our products move millions of people as we aim to make driving safer, smarter, and more connected, shaping the future of transportation on a global scale. The Role The Senior Analysis Engineer is responsible for planning, developing, and executing one-dimensional models of electrical components, subsystems, and full vehicle architectures for 12V/48V electrical systems. This role requires a deep understanding of vehicle-level electrical systems and proficiency in simulation tools such as Synopsys Saber. The senior analysis engineer is also required to have experience is co-simulation and software in the loop (SiL) modeling using tools like Matlab, Simulink and Simscape. The analysis engineer needs to closely work with suppliers to get high fidelity 12V component models (e.g battery, IBS, aggregator, CCU etc). The analysis engineer will create systems model, perform simulation, interpret and present simulation results to stakeholders at critical program milestones. Analysis engineer will be required to interact cross functionally with a wide variety of engineering teams (Electrical Architects, Co-simulation teams, Validation, Calibration and Design Release Engineers) to deliver standard work, perform root cause analysis, compare analytical results to tests, identify analytical gaps and lead capability projects to close these gaps. What You'll Do Lead effort to develop new analysis capabilities for 12V/48V electrical systems including, but not limited to, developing 12V battery model, 12V distribution model, aggregator model and other electrical components on the vehicle Develop physics-based models for co-sim and software in the loop effort Develop vehicle electrical and battery electro-thermal models to support virtual controls for Co-Sim and calibration initiatives Perform standard analysis to deliver design solutions which are robust and reliable utilizing optimization and statistical methods when appropriate Collaborate with global analysis engineers to ensure on time delivery of high-quality results Lead and conduct peer reviews of analysis results prior to delivery to the product team Work collaboratively with Electrical Architects, SiL teams and component hardware design teams to ensure system requirements are met, design concepts are evaluated, and development and validation plans are successful Collaborate with other CAE teams to capture and integrate higher fidelity models into electrical system models Support critical vehicle program gates with technical reviews (PPDRs, VVAs, Peer Reviews) Your Skills & Abilities (Required Qualifications) BS in Electrical Engineering, Computer Engineering or Controls engineering 5+ yrs of engineering experience in design, analysis or testing of 12V/48V electrical system or components Proficient in Synopsys Saber simulator, MAST modeling language, and electrical data analysis tools including MATLAB, Simulink, and Simscape Skilled in developing models for Software-in-the-Loop (SiL) simulations Experience with FMUs (Functional Mockup Unit) and co-simulation Hands-on experience with Charge Balance, Fail-Operational, Bus Integrity, Short Circuit and other 12V/48V Component Sizing simulations Strong foundation in engineering principles related to electric circuit analysis, electronics, electromagnetics, electric drive systems, control systems, and digital signal processing Experienced in analytical modeling of electric generators, batteries, heating and cooling systems, lighting systems, and electronic controllers Experience in applying Artificial Intelligence (AI)/Machine Learning (ML) methods Excellent debugging and troubleshooting capabilities What Will Give You A Competitive Edge (Preferred Qualifications) M.S. or PhD in Electrical Engineering, Computer Engineering or Physics Experience with development and usage of CAE/CAD tools Knowledge of Lithium-ion battery cell modeling and simulation Modeling (or other cell chemistries: Lead Acid, etc.). DFSS Black Belt or higher certification Experience in designing and implementing GUI (Graphical User Interface) as well as core software for technical applications with schematic interfaces This role is categorized as hybrid. This means the selected candidate is expected to report to a specific location at least 3 times a week {or other frequency dictated by their manager}. This job may be eligible for relocation benefits. About GM Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. Why Join Us We believe we all must make a choice every day – individually and collectively – to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. Benefits Overview From day one, we're looking out for your well-being–at work and at home–so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources . Non-Discrimination and Equal Employment Opportunities (U.S.) General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire . Accommodations General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us or call us at 800-865-7580. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.