Auto-apply to these electrical jobs

Growing government contractor looking to bring Electrical Engineers on to their team. Responsibilities include: Design and testing of SiC based power electronic converter topologies including active rectifiers, isolated DC-DC converters, solid-state-transformers, and high-speed motor drives • Design and test DSP based digital control algorithms, FPGA modulators, and PLC based high-level system controllers • Detailed PCB designs including SiC gate drivers, system control PCBs, and support hardware • Design and test low (1.2 - 1.7 kV) and medium voltage (3.3 – 10 kV) SiC semiconductor modules • Design embedded control algorithms, harmonic compensators, software PLLs, and other embedded algorithms • Develop Controller-Hardware-in-the-Loop test setups, control cards, and control algorithms • Experience with medium voltage power distribution, solid-state-transformers, and printed circuit board design experience highly desirable Minimum Requirements: • United States Citizenship required due to US Government ITAR program restrictions • BS in electrical engineering, computer science, or related major required, with minimum 3.3 GPA, MS and PhDs a plus • Ability to obtain a DoD security clearance • The following experience is not required, but highly desirable: o Designing and/or controlling motor drives, ac-dc, and dc-ac converters o High speed communications development with high performance FPGAs o Experience programming various microcontrollers, DSPs, and FPGAs. § Direct work with TI C2000 DSPs and Altera FPGAs $80,000 - $110,000 a year Growing government contractor looking to bring Electrical Engineers on to their team. Responsibilities include: Design and testing of SiC based power electronic converter topologies including active rectifiers, isolated DC-DC converters, solid-state-transformers, and high-speed motor drives • Design and test DSP based digital control algorithms, FPGA modulators, and PLC based high-level system controllers • Detailed PCB designs including SiC gate drivers, system control PCBs, and support hardware • Design and test low (1.2 - 1.7 kV) and medium voltage (3.3 – 10 kV) SiC semiconductor modules • Design embedded control algorithms, harmonic compensators, software PLLs, and other embedded algorithms • Develop Controller-Hardware-in-the-Loop test setups, control cards, and control algorithms • Experience with medium voltage power distribution, solid-state-transformers, and printed circuit board design experience highly desirable Minimum Requirements: • United States Citizenship required due to US Government ITAR program restrictions • BS in electrical engineering, computer science, or related major required, with minimum 3.3 GPA, MS and PhDs a plus • Ability to obtain a DoD security clearance • The following experience is not required, but highly desirable: o Designing and/or controlling motor drives, ac-dc, and dc-ac converters o High speed communications development with high performance FPGAs o Experience programming various microcontrollers, DSPs, and FPGAs. § Direct work with TI C2000 DSPs and Altera FPGAs

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary: (includes but is not limited to the following, other duties may assigned) Maintains and repairs electrical equipment and instrumentation. Monitors, maintains, and repairs plant Distributed Control System (DCS). Monitors, maintain, and repairs gas turbine, steam turbine control systems, generators, transformers, and switchgear. Maintain, calibrate, and repair plant electrical, instrumentation, and control systems. Perform routine trouble shooting activities. Use Computerized Maintenance Management System (CMMS) to effectively accomplish required maintenance in and efficient and organized manner. Optimize plant preventative maintenance program to meet OEM recommendations, regulatory requirements, and corporate maintenance philosophy. Responsible for maintaining logs, manuals, records, blueprints, and operating procedures in a neat and professional manner. Provide written reports on control system conditions when required. Incorporates safe behavior into all activities and consistently complies with all established safety and health policies and procedures, helps to identify and eliminate or actively manage risks in all work activities. Job Responsibilities Journey-level; specialized technical knowledge with function. Performs a variety of technical service/support duties that are semi-routine in nature. Routine and non-routine decisions with some latitude, but still subject to approval. With limited guidance, prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. Work periodically reviewed by others; work reflects solid performance of duties. Errors have small and possibly incremental impact on department or facility and discovered in succeeding operations where work is verified or checked. Completes tasks and resolves problems that require an ability to recognize deviation from accepted practices. Resolves most questions and problems and refers only the most complex issues to higher levels. Works under general supervision. Prioritizes daily activities to complete tasks/projects assigned by others. May assist with orienting and training employees in moderately complex to complex areas. Job Requirements High School Diploma, degree from technical/vocational school or equivalent. Journey-level; 2-5 years’ experience in instrument/electrical and control system applications. Preferred experience with Woodward Turbine Control System and Emerson Ovation Control System. Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity, and mathematics. Experience with DCS programming and configuration Advanced certifications/licensures. Valid state driver’s license. Salary Information Hourly Range Rate - $67.40-$73.09 per hour Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com . Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

Who we are Neros is a defense technology company rebuilding America’s drone industrial base. We design and manufacture high-performance unmanned systems that are tested in combat, iterated at startup speed, and built at massive scale. Our team culture is fast, hands-on, and obsessed with closing the gap between design and deployment. As drones transform the character of warfare, Neros is delivering the systems the West needs to compete on the modern battlefield and deter the adversaries of democracy. We’re hiring engineers, operators, and builders who want to move fast, take on extreme ownership, and get capability into the hands of warfighters in months, not years. What you will be doing Neros is hiring a team of full stack electrical engineers to build the electronics stack behind Archer. In just 2 years, Neros has built the highest rate drone production line in Amerca, building over 1000 Archer UAVs per month. Archer is a small UAV with a vertically integrated electronics stack to enable mass production and world class performance. Neros electrical engineers build a wide array of electronics systems including our in-house suite of custom anti-jam radios, our in-house flight computer, and in house BLDC motor driver. Neros systems are always designed for high volume and low cost. Most Neros systems are based off of small low-cost bare metal microprocessors (no FPGAs). Most Neros systems do not require advanced power electronics, and heavily bias towards consumer digital systems. Firmware is a key part of every Neros electrical system, so EEs work very closely with FW engineers. Neros EEs own design from start to finish and enjoy setting requirements, drawing block diagrams, running simulations, capturing schematics, doing PCB layout , building PCBAs, and conducting bring up. Every Neros design gets manufactured at high volume, so a quality production handoff is key. Neros EEs are “full stack” and love owning projects from start to finish. Responsibilities: Design and develop analog and digital circuits to build useful products. Create and manage schematic diagrams and PCB layouts using Altium Designer Select and source electronic components, considering performance, cost, and availability. Generate all necessary design and manufacturing files, such as Gerbers, BOMs, and assembly drawings. Perform board bring-up , including initial power-on, functional testing, and debugging of new hardware using Oscilloscopes, VNAs, VSAs, etc. Assemble, test, and troubleshoot prototype PCBs, which will require proficient soldering and rework skills. Collaborate with cross-functional teams, including firmware, mechanical, and manufacturing engineers, to ensure successful product integration. Develop and execute design verification and validation test plans. You should have the following: Eligible for top secret creance and valid US work authorization Proven experience in Electronics design (PCBs) , with a strong portfolio of completed projects. Proficiency in Altium Designer is required. Solid understanding of analog and digital circuit design principles. Hands-on experience with board bring-up , testing, and debugging. Soldering and rework skills, including experience with surface-mount components. Familiarity with standard electronic test equipment, such as oscilloscopes, multimeters, and logic analyzers. Bachelor's degree in Electrical Engineering or applicable personal projects. Nice to haves UAV electronics design experience (PX4 / Ardupilot flight controller design or similar) Experience with analog video systems (CVBS / PAL / NTSC ) Experience with digital video systems (e.g. MIPI-CSI) Experience with camera design Experience with BLDC motor drivers Experience with RF communication, DSP, or FPGAs Experience with LoRa Controls experience (e.g. PID controllers) Experience with Antennas and RF routing US Salary Range $120,000 - $180,000 USD The salary range for this role is an estimate based on a wide range of compensation factors, inclusive of base salary only. Actual salary may vary based on (but not limited to) work experience, education and/or training, critical skills, and/or business considerations. Highly competitive equity grants are considered part of Neros' total compensation package. We’re an equal opportunity employer. We welcome all applicants without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Wilson & Company’s Albuquerque, New Mexico office is currently seeking a full-time Senior Electrical Design Lead to support the electrical practice area team. The ideal candidate will have experience working for a wide variety of clients, including federal organizations (i.e. DOD, DOE, etc.). This position will have a primary focus on the daily operations of project design and inter-office collaboration with staff and team members. We are looking for someone with great communication skills who enjoys being part of a team. This includes performing office and field work, with the ability to collaborate and develop solutions with other disciplines. Roles and responsibilities include: Supports company’s strategic objectives, processes, and tools. Lead the electrical design and support a variety of projects ranging from building lighting and power to rail yard power distribution to water treatment plan lighting, power and controls Perform electrical calculations, i.e. lighting calculations or voltage drop calculations Actively lead and mentor electrical designers and CADD Technicians on electrical design projects. Collaborate directly with an electrical engineer on project design. Perform and attend site observations, meetings, walkthroughs and inspections Perform and ensure compliance with Wilson & Company’s Quality control and quality assurance standards Actively work with other offices, disciplines, and clients Monitor compliance with firm-wide safety policies. The position will conform to Wilson & Company’s flexible work policy and is not anticipated to be a hybrid or remote work position. The candidate must have an attitude and commitment to being an active participant in our company culture. In exchange for your skills, Wilson & Company offers a competitive salary and benefits package. Required Skills To be considered, the candidate must have solid knowledge and familiarity with electrical design codes and design software. This should include: Codes: NFPA 70 Software: Microsoft Office software CADD software (i.e. Revit, AutoCAD or MicroStation) Required Experience Associate’s degree, or greater, in computer aided Drafting or Design (equivalent design experience will be considered) Ten plus years of experience in the design of electrical projects. Manage or supervise multiple team members and coordinate effectively with other engineers and technicians. Please note that Wilson & Company is not currently sponsoring applicants for work visas. Annual Salary Range: $80,000 - $105,000 (Depending on Experience ) About Us: For nearly a century, Wilson & Company, Inc., Engineers & Architects, has provided award-winning engineering, architecture, planning, environmental, surveying, geospatial, and construction management services. With 16 offices in 9 states, we bring people together to practice their craft, create value, and accomplish great things. Guided by our purpose, we help clients move from concept to completion, transforming unused spaces into productive places, underutilized facilities into efficient ones, and rural or urban challenges into achievable solutions. At Wilson & Company, we focus on your specific needs, delivering excellence with lasting Higher Relationships in mind. By employing our core values—discipline, intensity, collaboration, shared ownership, and solutions—we create genuine experiences and lasting connections for our clients, employees, and communities. We support our employees’ success and well-being with a comprehensive benefits package, including options for health insurance, life insurance, disability coverage, paid time off, and retirement savings plans. We are proud to be an EEO/AA employer M/F/D/V and maintain a drug-free workplace, conducting pre-employment background checks. Join us and be part of a culture committed to helping you achieve personal and professional success.

Senior Electrical Materials & Process Engineer - Failure Analysis Company: The Boeing Company The Boeing Company is currently seeking a Senior Electrical Materials & Process Engineer - Failure Analysis to support the Boeing Research & Technology team, located in El Segundo, CA. The El Segundo site designs and builds advanced space and communication systems for military, commercial, and scientific uses, including advanced digital payload, all electric propulsion and 3D manufacturing capabilities for spacecraft that can operate in the geosynchronous, medium-Earth orbit of low Earth orbital planes. The Materials and Process Group in El Segundo develops, provides and maintains technical competency and integrity in the definition, evaluation, analysis, management, selection and control of materials, processes, and parts. In this role, you will be working in a state-of the-art laboratory to analyze electronic assemblies for product validation and failure analysis. The ideal candidate has a background with materials science or electrical engineering and experience with root cause investigations on failed electronic parts. Position Responsibilities: Defines requirements and approves tools, equipment, materials, parts and processes used in the engineering design, manufacture and/or maintenance of products. Produces specifications and other documents to manage the deployment of tools, equipment, materials, parts and processes. Maintains compliance with contractual and regulatory obligations. Promotes standardization across business activities. Evaluates emerging technologies for potential application to business needs. Develops and qualifies new tools, equipment, materials, parts and processes to meet requirements. Integrates new technologies as appropriate. Manages test and audit programs to qualify suppliers to applicable requirements. Conducts analysis to characterize performance or determine reasons for failure of tools, materials, parts or processes. Implements corrective and preventive actions. Designs, develops and qualifies computer and production systems to satisfy user requirements. Uses project management tools to meet cost, technical, and schedule requirements. Incorporates environmental health and safety, LEAN and Quality principles into (1) materials and processes, (2) research, design and qualification, (3) work procedures and (4) labs and office areas. Basic Qualifications (Required Skills/Experience): Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science 9+ years of work experience or an equivalent combination of education and experience Experience working in a laboratory environment Experience analyzing technical data and providing clear written and verbal presentation of the results Experience with semiconductor device physics 3+ years of experience in component engineering, failure analysis, reliability engineering, Destructive Physical Analysis (DPA) testing or electronic Materials & Processes (M&P) Preferred Qualifications (Desired Skills/Experience): Master’s or Doctorate in electrical engineering, materials engineering or physics Experience performing SEM, TEM, FIB, EDS, EBSD, Auger, XPS, AFM, CT, optical microscopy, curve tracing, TDR, or similar electrical testing. Experience performing semiconductor deprocessing or cross sectioning via micromachining, laser ablation, plasma etch, metallography techniques, or chemical decapsulation. Experience with semiconductor technology and wafer/die fabrication and multilayer deprocessing. Experience performing electronic failure investigations and fault isolation. Experience with thermal or photo emission, OBIRCH/XIVA, EBIC, Nanoprober, CSAM or similar. Experience with the implementation of new laboratory equipment and developing training materials or providing hands-on training to others Experience working in an interdisciplinary team to identify and implement solutions for complex testing and characterization efforts Technical report writing and presentation experience Active TS/SCI security clearance Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies . Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $124,950 – $169,050 Language Requirements: Not Applicable Education: Bachelor's Degree or Equivalent Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Whether you’re a recent grad or a seasoned professional, you can experience meaningful career growth at Rosendin. Enjoy a true sense of ownership as you work with a proven industry leader on some of the most exciting and high-profile projects in the nation. We offer a wide range of job opportunities, competitive compensation, full benefits, an Employee Stock Ownership Plan and more. Why Rosendin? Committed. Innovative. Engaged. If you’re looking to take your career to the next level and work with some of the best and brightest in the industry, we want to hear from you. Since our founding over 100+ years ago, Rosendin has been driven to positively impact the communities where we live and work. We are an organization built on integrity and we have a culture that empowers people, embraces diversity, and inspires everyone to do their best. As one of the largest EMPLOYEE-OWNED electrical contractors in the United States, you will have the unique benefit of being a shareholder at a company that is experiencing tremendous growth and success. When our people succeed and fuel our success, we reward them. We'd love to have you as a shareholder! YOUR NEXT OPPORTUNITY: The Area Superintendent oversees multiple Electrical Construction projects, ensuring they are completed on time, within budget, and in compliance with safety and quality standards. This role requires strong leadership, technical expertise, and coordination with various stakeholders, including project managers, engineers, clients, and field personnel. WHAT YOU’LL DO: Plan and supervise General Foreman and Foreman on craft activities, including determining method of electrical construction, manpower levels, material quantities equipment, temporary power sources, work schedule and documenting actual hours worked. Coordinate assigned work with work of different crafts, company departments, or other contractors. Maintain liaison with engineering, estimating, and Project Management to ensure work complies with drawings, specifications, and schedule. Assist in resolving construction problems (lack of productivity, work interfaces, etc.) as required. Maintain communications with unions, resolving jurisdictional disputes, requisitioning required manpower, etc., as necessary. Monitor craft compliance with project safety program requirements; document and ensure corrective measures are implemented. Maintain liaison with other departments (i.e., Material Control, Purchasing, Quality Control, Engineering) to ensure all required materials, equipment, inspections, etc., support craft activities and project schedule. Lead in the implementation of all field training programs. Closely monitor company QA/QC programs. Perform additional assignments per supervisor's direction. The duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing and other duties will be assigned based on the positions role within the business unit. WHAT YOU’LL NEED TO BE SUCCESSFUL: Advanced understanding of electrical construction scheduling, cost control and ability to control and supervise large groups essential. Proficient in using a computer and Microsoft Office (Outlook, Word, Excel, etc.); Oracle preferred. Ability to prioritize and manage multiple tasks, changing priorities as necessary Ability to work under time pressure and adapt to changing requirements with a positive attitude Effective oral and written communication skills as required for the position Ability to be self-motivated, proactive and an effective team player Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others WHAT YOU BRING TO US: 8-15+ years of experience in electrical construction, including field supervision 5+ years in a leadership role (e.g., Foreman, General Foreman or Electrical Superintendent) Extensive experience with large scale electrical projects, particularly commercial, data cents, industrial, or infrastructure projects Journeyman or Master Electrician license Strong Knowledge of NEC(National Electrical Code), local electrical codes, and data center- specific standards TRAVEL: Up to 25 - 50 % WORKING CONDITIONS: General work environment – sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is conducted primarily indoors with varying environmental conditions such as fluorescent lighting and air conditioning Noise level is usually low to medium; it can be loud on the jobsite. We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions. Occasional lifting of up to 30 lbs. Rosendin is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, pregnancy, age (over 40), or any other categories protected by applicable federal, state, or local law. YOU Matter – Our Benefits ESOP – Employee Stock Ownership 401K Annual bonus program based upon performance, profitability, and achievement 17 PTO days per year plus 10 paid holidays Medical, Dental, Vision Insurance Term Life, AD&D Insurance, and Voluntary Life Insurance Disability Income Protection Insurance Pre-tax Flexible Spending Plans (Health and Dependent Care) Charitable Giving Match with our Rosendin Foundation Our success is rooted in our people. We all come together around long-term vision and a sense of shared ownership. As a group, we do whatever it takes to ensure the success of our business…and your career. Rosendin Electric is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. Employment decisions are considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Base Pay Range: $26.78 - $45.53 Per Hour Primary Location:USA-CA-Milpitas-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits identified below. Interns are eligible for some of the benefits identified below. Our pay ranges are determined by role, level, and location. The range displayed above reflects the minimum and maximum pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including location, job-related skills, experience, and relevant education level or training. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications In this position you will be working independently to build, test and troubleshoot cameras and printed circuit boards on camera and servo control assemblies. Circuitries applied include both analog and digital on servo control and image acquisition systems. Confirmed experience being able to troubleshoot down to component level is required. Typical daily activities and experience include, but not limited to the following: Read and interpret schematics and electrical drawings. Test and troubleshoot using diagnostic equipment including test programs, signal generators, oscilloscopes, and specialized test apparatus. Redline and help update documentation: assembly and test procedures Partner with engineering team to bring new products to manufacturing Assist with training new team members Required Experience: AA in Electrical Technology/Electronic Program with 2 years of related work experience OR Bachelors in Electrical Engineer is required Experience solving down to component level is required Must be willing to work overtime, day or night shift and weekends Soft skills include: Possess good interpersonal and communication skills, and work in collaborative style. Must be willing to work overtime, day or night shift and weekends. Minimum Qualifications Typically requires 2 to 4 years of relevant experience. The company offers a total rewards package that is competitive and comprehensive including but not limited to the following: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. KLA is proud to be an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, national origin, sex, gender identity, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other status protected by applicable law. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at talent.acquisition@kla.com or at +1-408-352-2808 to request accommodation.

The hardware team at ISEE is seeking a full-time electrical engineer with a strong foundation in the fundamentals of electrical engineering. This job includes research as well as development of replacement or new subsystems in the electro-mechanical architecture for both prototype designs as well as production intent designs for autonomous vehicles. Role responsibilities include: -Embedded development, programming and working with embedded developers -Defining and designing communications systems such as CAN(J1939, CANOpen) SPI, I2C, USB, and RS-232. -Working with others to develop and design the overall electrical architecture -Working with others to integrate electronics into vehicles -Design of safety critical system elements -Verification and Validation of electrical systems -Work with suppliers and drive the implementation of development into production -PCB layout, schematic design Qualifications -Bachelor/Master Degree in Electrical Engineering -Passionate about self-driving vehicles -Excellent communication skills -Experience with electrical drawings and parts management -Experience with prototyping of boards Preferred -10+ years of work experience -Experience with actuators and sensors of varying types -Experience with safety critical design work -Robotics/autonomous experience is a plus -Experience with Verification and Validation processes

The Manager of Electrical Engineering is responsible for leading the development of new and continuous improvement projects related to our automation system’s electrical architecture, electronics control units and components. The candidate is responsible for helping shape and interpret high-level customer and product stakeholder requirements, working with the team to understand required functionality and build and execute against implementation roadmaps. Ultimately, this leader will support the execution by directing high level efforts, removing barriers, evaluating completed work, and sharing/communicating progress. This leader ensures that we develop designs that meet product performance and cost requirements within budget and on schedule. Specific Responsibilities: -Provide high level technical and people leadership to the electrical team -Develop and maintain EE technical vision, leveraging input from customers, vendors, and other technical and non-technical stakeholders -Work with hardware team members and dedicated program managers to define accurate project schedules for complex electrical engineering projects. -Investigate new technologies and solutions for our system -Drive delivery of aggressive goals by managing project schedules, product features, performance, cost, and resources effectively -Confirm that implementation satisfies all safety requirements -Ensure the team is appropriately resourced to deliver on product goals -Hire and build out the EE team accordingly. -Anticipate and communicate project risks and mitigations -Effectively communicate status with stakeholders regarding deliverables, timelines, and budget. -Develop strong working relationships with adjacent development teams to improve efficiency and collaboration. -Provide mentorship to improve team effort estimation and early risk identification/mitigation skills. -Ensure that comprehensive deliverables are completed per ISEE’s product development processes and provide feedback to process owners to support continuous improvement. Qualifications: - 8-10+ years hands-on experience in Electrical Engineering, including technical team leadership, scheduling, resource planning and budgeting, ideally within an automotive and/or robotics product development team. -Experience building alignment and excitement around projects. -Experience with preparing internal documentation in anticipation of engaging with contract manufacturers -Exposure to the requirements of structures interacting with autonomous systems and/or robotics - specifically with control, and/or warehouse management systems is a big plus. -Dedicated servant leader, able to provide clear priorities, and be hands on as needed to ensure successful delivery -Ability to work successfully in a collaborative team environment and constructively influence team decisions. -High energy, drive, commitment, self-initiative, and perseverance are required with a demonstrated track record of personal technical accomplishments

Responsibilities Principal Engineer is responsible for managing projects budgets and scheduling of department hours Strong technical skills and an ability to mentor and assist staff in all aspects of electrical design, including I&C specifications and selection Supervise and monitor staff ensuring that engineering packages are completed on time and within budget Ability to analyze, design and produce engineering packages for clients and prepare instrumentation specifications for purchase Ability to establish and maintain good business relationships with key client contacts throughout the project Extensive knowledge of design codes and the knowledge to establish design criteria and ensure staff is following proper protocol On-site interface with client engineering representative and other discipline engineers Review, check and analyze design drawings prior to client submittals Responsible for ensuring that documents produced by the team members follow both internal and client quality standards. Medium & High power distribution system design and layout Substation design, short circuit analysis, ARC flash studies Lighting design and grounding and lightning protection Electrical heat trace design Development of wiring diagrams and schematics Application of medium to low voltage transformers Application of uninterruptible power systems Conduit, cable tray and underground duct bank design Utility interface design Electrical calculations including short circuit, load flow, arc flash, motor starting, harmonic, device coordination and voltage drop. Qualifications Bachelor’s Degree in Electrical Engineering 10-15 years of Electrical Engineering experience in Medium/High voltage design and application of switch gear and motor controls within a power distribution or engineering consulting environment. 5+ Years of experience working in power distribution or engineering consulting 5+ years’ experience supervising staff and managing projects from inception to completion including evaluating scope of work and assigning responsibilities Basic understanding of other discipline workflow and how all departments work together to complete projects Ability to establish and maintain professional relationships with clients, subordinates and co-workers Must possess exceptional interpersonal and organizational skills Must be able to work in the US without sponsorship now or in the future Valdes Architecture & Engineering Company is looking for bright and talented people that want to take their career to the next level. We offer many rewarding career paths to challenge and engage our employees at all phases of their careers. Our office provides a team environment, and excellent working conditions, which allow individuals to maximize their potential. Valdes Engineering offers an outstanding benefits package including Medical, Dental, 401K plan, Company paid Long Term and Short Term Disability Insurance, Company paid Life and AD&D Insurance, Pet Insurance, a discounted gym membership and tuition reimbursement. EEO/AAE

Job Summary Seasoned Electrical Engineer with 10-15 years of experience in Medium/High voltage design and application of switch gear and motor controls within a power distribution or engineering consulting environment. This individual interfaces with client engineering representatives and other discipline engineers within the Valdes organization. May visit job site as required for exchange of information. Responsibilities Strong Knowledge within the Electrical Engineering discipline with the capability and the initiative to perform the following tasks while supervising and mentoring junior staff members. Strong technical skills and an ability to mentor and assist staff in all aspects of electrical design, including I&C specifications and selection Assist staff with ensuring that engineering packages are completed on time and within budget Ability to analyze, design and produce engineering packages for clients and prepare instrumentation specifications for purchase On-site interface with client engineering representative and other discipline engineers Medium & High power distribution system design and layout Substation design, short circuit analysis, ARC flash studies Lighting design and grounding and lightning protection Electrical heat trace design Development of wiring diagrams and schematics Application of medium to high voltage transformers Application of uninterruptible power systems Conduit, cable tray and underground duct bank design Utility interface design Electrical calculations including short circuit, load flow, arc flash, motor starting, harmonic, device coordination and voltage drop Instrumentation & Controls Duties P&ID development Instrument selection and specifications, control valve and primary element sizing Instrument loop diagrams, location plans and installation details. Interconnection and wiring diagrams System architecture development Control system hardware specifications Development of sequence of operation and functional description documents Development of cause and effect diagrams All other duties as assigned Technical Competencies Ability to communicate complicated issues in a simple manner Ability to multi-task and handle multiple priorities simultaneously Strong verbal and written communication skills Knowledgeable in SKM electrical modeling software and Smart Plant Instrumentation (inTools) Extensive knowledge of AutoCAD Qualifications Education: Bachelor’s Degree in Electrical Engineering required Experience: 10-15 Years of experience working in power distribution or engineering consulting Must possess exceptional interpersonal and organizational skills Must be able to work in the US without sponsorship now or in the future Valdes Architecture & Engineering Company is looking for bright and talented people that want to take their career to the next level. We offer many rewarding career paths to challenge and engage our employees at all phases of their careers. Our office provides a team environment, and excellent working conditions, which allow individuals to maximize their potential. Valdes Engineering offers an outstanding benefits package including Medical, Dental, 401K plan, Company paid Long Term and Short Term Disability Insurance, Company paid Life and AD&D Insurance, Pet Insurance, a discounted gym membership and tuition reimbursement. EEO/AAE

Job Summary Seasoned Electrical Engineer with 10-15 years of experience in Medium/High voltage design and application of switch gear and motor controls within a power distribution or engineering consulting environment. This individual interfaces with client engineering representatives and other discipline engineers within the Valdes organization. May visit job site as required for exchange of information. Responsibilities Strong Knowledge within the Electrical Engineering discipline with the capability and the initiative to perform the following tasks while supervising and mentoring junior staff members. Strong technical skills and an ability to mentor and assist staff in all aspects of electrical design, including I&C specifications and selection Assist staff with ensuring that engineering packages are completed on time and within budget Ability to analyze, design and produce engineering packages for clients and prepare instrumentation specifications for purchase On-site interface with client engineering representative and other discipline engineers Medium & High power distribution system design and layout Substation design, short circuit analysis, ARC flash studies Lighting design and grounding and lightning protection Electrical heat trace design Development of wiring diagrams and schematics Application of medium to high voltage transformers Application of uninterruptible power systems Conduit, cable tray and underground duct bank design Utility interface design Electrical calculations including short circuit, load flow, arc flash, motor starting, harmonic, device coordination and voltage drop Instrumentation & Controls Duties P&ID development Instrument selection and specifications, control valve and primary element sizing Instrument loop diagrams, location plans and installation details. Interconnection and wiring diagrams System architecture development Control system hardware specifications Development of sequence of operation and functional description documents Development of cause and effect diagrams All other duties as assigned Technical Competencies Ability to communicate complicated issues in a simple manner Ability to multi-task and handle multiple priorities simultaneously Strong verbal and written communication skills Knowledgeable in SKM electrical modeling software and Smart Plant Instrumentation (inTools) Extensive knowledge of AutoCAD Qualifications Bachelor’s Degree in Electrical Engineering required 10-15 Years of experience working in power distribution or engineering consulting Must possess exceptional interpersonal and organizational skills Must be able to work in the US without sponsorship now or in the future

Responsibilities Electrical Design with the capabilities and the initiative to perform the following tasks with supervisory/mentor assistance as required Design computations; prepare estimates, bill of materials, construction drawings, and other engineering documents Participate in client meetings to determine job requirements, discuss progress of job related problems, and find solutions to those problems Assist the discipline engineer or senior or principal designer in the development of the design portion of the work Review design drawings to ensure correct engineering and client approval Must have the ability to ensure project is within scope, budget, and schedule Qualifications Bachelor's degree in Electrical Engineering required 6+ years of technical training in design and drafting Strong background in everyday use of Revit Strong attention to detail is required Basic experience with AutoCAD or Microstation Solid Microsoft Office skills Must possess exceptional interpersonal and organizational skills Must be able to work in the US without sponsorship now or in the future Salaries for all position are based on a variety of factors, including but not limited to relevant experience, total years of experience in the industry, education, skills, and qualifications. Compensation may vary depending on the candidate's individual background and expertise. Valdes Architecture & Engineering Company is looking for bright and talented people that want to take their career to the next level. We offer many rewarding career paths to challenge and engage our employees at all phases of their careers. Our office provides a team environment, and excellent working conditions, which allow individuals to maximize their potential. Valdes Engineering offers an outstanding benefits package including Medical, Dental, 401K plan, Company paid Long Term and Short Term Disability Insurance, Company paid Life and AD&D Insurance, Pet Insurance, a discounted gym membership and tuition reimbursement. EEO/AAE

Ready to make connectivity from space universally accessible, secure and actionable? Then you’ve come to the right place! E-Space is bridging Earth and space to enable hyper-scaled deployments of Internet of Things (IoT) solutions and services. We are building a highly-advanced low Earth orbit (LEO) space system that will fundamentally change the design, economics, manufacturing and service delivery associated with traditional satellite and terrestrial IoT systems. We’re intentional, we’re unapologetically curious and we’re 100% committed to innovate space-based communications and deliver actionable intelligence that will expand global economies, protect space and our planet and enhance our overall quality of life. We are seeking a highly skilled and motivated System Electrical Engineer to join our dynamic engineering team. In this role, you will be responsible for the design, integration, and validation of electrical systems and subsystems for cutting-edge products. You will work closely with cross-functional teams to develop robust, high-performance electrical solutions, ensuring seamless integration of hardware and software components. This role requires expertise in both analog and digital electronics, with a strong understanding of systems-level design and integration. We are at the forefront of developing cutting-edge communication systems, revolutionizing connectivity in space and on Earth. Our mission is to deliver highperformance, scalable, and flexible solutions for the most challenging communication environments. What you will be doing: You will work closely with a multi-disciplinary team to design system-level solutions, including the integration of SoCs, schematic and layout evaluations, manufacturing support, production testing, system validation, and troubleshooting. A critical aspect of the role will be ensuring that all designs are suitable for small form factor applications. Design, develop, and integrate electrical systems and subsystems, including analog, digital, and mixed-signal circuits. Collaborate with cross-functional teams, including hardware and software engineers, to ensure the successful integration of electrical systems into products Perform schematic design, PCB layout review, and ensure the electrical systems meet required performance, power, and size constraints. Conduct system validation, troubleshooting, and performance testing to ensure the functionality of electrical systems. Work with vendors and suppliers to select components, ensuring compatibility with design specifications What you bring to this role: BS/MS in Electrical Engineering or equivalent 5 + years of experience in electrical engineering, with a focus on system-level design and integration. In-depth knowledge of mixed-signal components such as PMICs, amplifiers, codecs, sensors, op-amps, ADCs, DACs, memory, charging circuits, and experience with integrating SoCs into designs and adding peripherals Strong understanding of analog and mixed-signal design principles, including noise, linearity, and signal integrity Knowledge of communication protocols such as I2C, SPI, UART, I2S, PCI-e etc. Familiarity with integrating designs into small form factor products, ensuring functionality within space and power constraints Familiarity with low-power electronics, sensor interface circuits, and SoC integration Experience with prototyping, debugging, and characterizing mixed-signal hardware This is a full time, exempt position, based out of our Saratoga office. The target base pay for this position is $110,000 - $200,000 annually. The total compensation packaged will be determined by various factors such as your relevant job-related knowledge, skills, and experience. We are redefining how satellites are designed, manufactured and used—so we’re looking for candidates with passion, deep knowledge and direct experience on LEO satellite component development, design and in-orbit activities. If that’s your experience – then we’ll be immediately wow-ed. E-Space is not currently able to provide employment sponsorship for candidates who do not hold work authorization for the location of this role. Why E-Space is right for you: As a member of our team, you will play a crucial role in driving our success. Our team members have a strong sense of dedication and responsibility; this includes a strong commitment to our mission to create an entirely new suite of global capabilities to improve lives, business efficiencies and build a smarter planet. This means that there will be times when extra hours, including nights and weekends, may be needed to meet critical deadlines and mission goals. In return, we offer a dynamic work environment with opportunities for professional growth and development and the chance to make a meaningful impact in a high-growth industry. We want you to make the most of your journey at E-Space. That’s why we support and invest in the physical, emotional and financial well-being of our team members and their families. Some of what you can expect when working at E-Space: • An opportunity to really make a difference • Sustainability at our core • Fair and honest workplace • Innovative thinking is encouraged • Competitive salaries • Continuous learning and development • Health and wellness care options • Financial solutions for the future • Optional legal services (US only) • Paid holidays • Paid time off

The Mosaic Company (NYSE: MOS) is the world's leading integrated producer of concentrated phosphate and potash-two of the three most important nutrients in agriculture. We employ more than 13,000 people in six countries to serve farmers all over the world. Our Headquarters is in Lithia, Florida with operations throughout North America (U.S./Canada) and South America. At Mosaic We Help the World Grow the Food it Needs- Apply today and join our team! Heavy Industrial Electrical Instrumentation Technician As an E&I Technician, you'll play a crucial role in our mission to help the world grow the food it needs and keep our plants running smoothly. Your expertise in troubleshooting, repairing, and maintaining electrical, electronic, instrumentation, and automation equipment will be vital to our operations. From lighting to motors, you'll ensure everything functions efficiently while adhering to safety standards and collaborating with your team. You'll also manage work requests through our Computerized Maintenance Management System (CMMS). If you're detail-oriented and can thrive in an outdoor industrial environment with varying temperatures, this role could be perfect for you. Schedule: Our EIA Techs work rotating 12-hour shifts with 7 consecutive days off in a 28-day cycle. Where will you work: Onsite at our Riverview phosphate Plant- 8813 HWY 41 South | Riverview, FL 33578. This facility has a union onsite. What you'll do: Maintain and repair motors, starters, drives, low-to-medium-to-high voltage systems, and instrumentation throughout the entire plant. Common voltages include 480 volts and 4,160 volts Tasks you will perform: Pre Job Hazard-Analysis, Lock-out Tag-out (LOTO), Hot Work, Hazardous Work, Confined Space, Water Safety, Line Breaking, Safe Work, Daily PM Inspection, Work Order Feedback, General Equipment/Line Isolation Permits or Procedures or Forms or Reports. Troubleshoot and assess all EIA systems across the Plant or Mine Adjust hardware to maintain the interface between automation and operations Handle regular work orders and respond to emergencies throughout the Plant or Mine Perform maintenance on equipment that monitors flow, temperature, density, and pressure Daily communication with area supervisors to prioritize and delegate tasks Input data into the Computerized Maintenance Management System (CMMS) Remain vigilant about issues that could impact fellow workers' safety or the environment Update assets/BOM and drawing What you'll need: High school diploma or GED preferred 4+ years' experience in an industrial electrical environment or completion of an accredited electrical program Experience troubleshooting heavy industrial electrical equipment such as wiring and creating motor controls from scratch Heavy industrial instrumentation experience Ability to read blueprints, schematics and manuals Basic computer skills with knowledge of Microsoft Office Suite Ability to accept and follow all safety procedures Ability to safely move in and through work areas, including climbing stairs, maintaining good balance, being mentally alert, having good visual acuity and safely working at heights Ability to safely work in and around heavy industrial environment, including moving objects, concentrated chemicals and transport vehicles Complete Pre-Job Workplace Examinations Responsible for the safe and compliant storage, inspection, usage of tools and equipment Bonus points if you have the following: Associate degree in vocational, electrical, instrumentation, or automation IBEW apprenticeship and Phosphate industry Experience with Programmable Logic Controllers (PLC) programming/software What's in it for you: A competitive base wage + a bonus incentive 11 paid holidays each year Paid sick days Paid sick leave (Short term disability) Paid vacation A robust benefits package which includes Medical, Dental, and Vision insurance A generous 401k with a company match and annual company contributions Eligible for overtime pay based on business need Tuition reimbursement #LI-KM1

Operations Electrical Technician III Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 76 power plants in operation and one under construction represents nearly 26,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states, Canada and Mexico. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary (includes but is not limited to the following, other duties may be assigned) The daily routine will consist of ensuring the Solar Field/BESS systems are fully available and operating per dispatch. Acknowledging and responding to alarms. Performing plant rounds, inspections, and general housekeeping. Authoring, reviewing and updating: Standard Operating Procedures, Emergency Response Guides, EHS Policies, performing scheduled maintenance via assigned work orders, submitting daily availability declarations to scheduling coordinators, keeping the plant logbook, managing contractors, issuing & tracking permits for safe work, confined space, hot work and energized electrical work, review and update P&ID and electrical drawings. Preparing and hanging Lock Out Tag Out. De-energizing or re-energizing equipment fed from multiple AC and/or DC power sources, hanging temporary electrical grounds. Maintain site 125VDC backup batteries, chargers, and emergency generator. Job Responsibilities Senior-level; recognized technical expertise in own and possibly related functions. Performs a variety of complex technical service/support duties requiring specialized knowledge. Regularly makes decisions on non-routine or escalated technical issues. Independently prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. Checks own work and possibly the work of others; work results are of the highest quality standards and advanced technical competency. Errors may be serious, usually not subject to direct verification or check. Duties and tasks reflect substantial variety and complexity. Resolves the most complex technical issues, conferring with Team Leader occasionally; may serve as resource to others in resolution of complex issues. Works under limited supervision. Prioritizes own weekly schedule and may guide others in the completion of tasks within clearly defined schedules as set by management. Regularly provides on-the-job skills training to others in complex technical areas. Job Requirements High School Diploma, degree from technical/vocational school, military service or equivalent. Senior-level; minimum of 5 years’ experience in instrument/electrical and control system applications. Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity, and mathematics. Experience with DCS programming and configuration Advanced certifications/licensures. Valid state driver’s license. Specialized Job Information Calpine’s Renewable Energy Sites use multiple technologies including solar and battery systems to generate, store and discharge electrical energy for the bulk electric system. Maintenance and Service agreements vary per site and location. This position requires proficiency in both Operations and Electrician duties and responsibilities for battery locations. You will be responsible to support the operations and maintenance activities while complying with all Federal, State, Municipality laws and regulations, along with contractual obligations. The daily routine will consist of ensuring the BESS systems are fully available and charging/discharging per dispatch. Acknowledging and responding to alarms. Performing plant rounds, inspections, and general housekeeping. Authoring, reviewing, and updating: Standard Operating Procedures, Emergency Response Guides, EHS Policies, performing scheduled maintenance via assigned work orders, submitting daily availability declarations to scheduling coordinators, keeping the plant logbook, managing contractors, issuing & tracking permits for safe work, confined space, hot work and energized electrical work, review and update P&ID and electrical drawings. Preparing and hanging Lock Out Tag Out. De-energizing or re-energizing equipment fed from multiple AC and/or DC power sources, hanging temporary electrical grounds. Maintain site 125VDC backup batteries, chargers, and emergency generator. Individual will need to certify for annual use of a fork truck and high reach. (Man lift). Be able to work efficiently alone with limited supervision at times. Work a rotating schedule that could consist of weekends, evening and/or nightshifts. Respond to call-ins and emergencies in a timely manner. On occasion, be requested to travel to other BESS Calpine sites to assist with outages or participate in training or meetings. Work towards and complete Calpine’s Operator and IC&E qualifications standards as they apply to this site. Perform light computer work and reporting. Keep plant and workspaces clean and tools properly stowed and secured. Additional preferred specialized job responsibilities and requirements: 7-10 years industry experience in an industrial work setting with direct experience for LOTO, hazard isolation, ground, and all other OSHA safety requirements. Journey-level electrical, generally 5 years directly related experience. Previous experience using test equipment preferred. Experience with electrical equipment repairs, control system experience preferred, strong electrical and process operation aptitude, general understanding of mechanical, physics and mathematics. Must be able to work safely, and alone at times. Will manage contractor labor. Will properly and safely de-energize Low, Medium, and High Voltage Electrical equipment that are fed from multiple sources. Will be able to safely verify electrical equipment is de-energized. Will be able safely install temporary grounding on de-energized electrical equipment. Will be able to clearly communicate orally and in writing (English language) Will be able to lift 50 lbs. from floor to chest. Will be able to ascend and descend ladders. Will be able to traverse over uneven walkways and surfaces. Will be able to wear Arc-Flash suit and other Personal Protective Equipment Will be able to walk up to ½ mile at a time. Will be able to stand for hours. Will be able to sit for hours. Will be able to squat at knees and bend at waste. Salary Information Hourly range rate: Hourly range rate - $60.86-$66.20 per hour Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com . Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

Calpine Corporation is America's largest generator of electricity from natural gas and geothermal resources with operations in competitive power markets. Its fleet of 77 power plants in operation represents over 27,000 megawatts of generation capacity. Through wholesale power operations and its retail businesses, Calpine serves customers in 22 states and Canada. Its clean, efficient, modern and flexible fleet uses advanced technologies to generate power in a low-carbon and environmentally responsible manner. The company was established on the premise that a strong commitment to the environment is inextricably linked to excellence in power generation and corporate responsibility. Since its founding in 1984, Calpine has led the power industry in its unwavering commitment to environmental stewardship. In addition, its renewable geothermal plants use steam generated deep below the earth's surface to produce clean, renewable electricity. Job Summary: (includes but is not limited to the following, other duties may assigned) Maintains and repairs electrical equipment and instrumentation. Monitors, maintains, and repairs plant Distributed Control System (DCS). Monitors, maintain, and repairs gas turbine, steam turbine control systems, generators, transformers, and switchgear. Maintain, calibrate, and repair plant electrical, instrumentation, and control systems. Perform routine trouble shooting activities. Use Computerized Maintenance Management System (CMMS) to effectively accomplish required maintenance in and efficient and organized manner. Optimize plant preventative maintenance program to meet OEM recommendations, regulatory requirements, and corporate maintenance philosophy. Responsible for maintaining logs, manuals, records, blueprints, and operating procedures in a neat and professional manner. Provide written reports on control system conditions when required. Incorporates safe behavior into all activities and consistently complies with all established safety and health policies and procedures, helps to identify and eliminate or actively manage risks in all work activities. Job Responsibilities Journey-level; specialized technical knowledge with function. Performs a variety of technical service/support duties that are semi-routine in nature. Routine and non-routine decisions with some latitude, but still subject to approval. With limited guidance, prioritizes and executes responsibilities effectively for a single trade, group of related tasks or functional area. Work periodically reviewed by others; work reflects solid performance of duties. Errors have small and possibly incremental impact on department or facility and discovered in succeeding operations where work is verified or checked. Completes tasks and resolves problems that require an ability to recognize deviation from accepted practices. Resolves most questions and problems and refers only the most complex issues to higher levels. Works under general supervision. Prioritizes daily activities to complete tasks/projects assigned by others. May assist with orienting and training employees in moderately complex to complex areas. Job Requirements High School Diploma, degree from technical/vocational school or equivalent. Journey-level; 2-5 years’ experience in instrument/electrical and control system applications. Preferred experience with Woodward Turbine Control System and Emerson Ovation Control System. Strong mechanical aptitude with an advanced understanding of chemistry, physics, electricity, and mathematics. Experience with DCS programming and configuration Advanced certifications/licensures. Valid state driver’s license. Salary Information Hourly Range Rate - $67.40-$73.09 per hour Additional Calpine Information: Equal Opportunity Employer of Minorities, Females, Protected Veterans, and Individuals with Disabilities. Calpine is committed to Equal Employment Opportunity and providing reasonable accommodations to applicants with physical and/or mental disabilities. If you are interested in applying for employment and need special assistance or an accommodation to use our website or to apply for a position, please send an e-mail with your request to hrrecruitment@calpine.com . Determination on requests for reasonable accommodation are made on case-by-case basis. Please view Equal Employment Opportunity Posters provided by OFCCP here

F-15E Electrical Environmental/Avionics Technician – Lakenheath Company: The Boeing Company Boeing Global Services (BGS) is seeking a F-15E Electrical Environmental/Avionics Technician to be part of the on-site F-15E Field Modification Team supporting the USAF customer at RAF Lakenheath in the United Kingdom. The Boeing Team is a vital part of the support that we provide the USAF Customer. Boeing has a team of 15 employees performing modification and testing of the customer F-15 aircraft on site. This is a Long-Term Assignment to the United Kingdom. Relocation/assignment benefits to the international location will be provided. Ability to meet international assignment health requirements required. If accompanied, family must also meet international assignment health requirements. Working as member of the Boeing Team, the role is to undertake the modification of the F-15E fleet based at RAF Lakenheath in Suffolk, UK . Our support strategy allows maximum flexibility so you may sometimes be deployed to undertake support activities in other locations if priorities dictate it. You will perform modification work in accordance with documented drawings and technical orders. Other maintenance activities, troubleshooting and modified or disturbed system functional/operational tests. You will work within a team of peers to perform tasks associated with aircraft modification. Candidates will be responsible to ensure established process adherence, accurate and timely work recording and contractual/regulatory compliance. Experience of working in an aircraft modification environment or MRO would be beneficial. You must have served a recognized and relevant aircraft training course or USAF aircraft trade training equivalent, and be proficient in the interpretation of engineering drawings, workbook instructions, and technical manuals. Position Responsibilities: Assembles disassembles and/or modifies systems by changing removing replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees/completes assembly disassembly or overhaul. Configures aerospace vehicles and test equipment. Troubleshoots complex aircraft systems to isolate avionics faults and repair faulty components within guidelines published in authorized maintenance documents. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance. Inspects components and verifies repairs for flight worthiness requirements. Proficient computer skills, use of the Microsoft Office suite. A high level of written and verbal communication and interpersonal skills are required. Work with limited supervision. Basic Qualifications (Required Skills/Experience): Minimum 3 years of experience with military fighter aircraft maintenance. Minimum 3 years of experience installing aircraft modifications to include fabricating and installing aircraft electrical system wiring, connectors, electrical components or avionics boxes. Preferred Qualifications (Desired Skills/Experience): Prior F-15 Avionic experience would be beneficial but not essential. Strong communication skills (both written and oral). Good organizational skills. Attention to detail. Ex-Pat Information: Candidate must be able to obtain a work visa, depending on requirements of the country. Candidate must be able to meet the cultural requirements of the country, as applicable. Employment is contingent on the candidate’s ability to satisfy all labor and immigration formalities of the country. Because the candidate selected will be expected to go on an international assignment, the offer will be contingent upon the candidate’s ability to obtain clearances from International Health Services and the receipt of a visa/work permit to the country in which he or she will be assigned. These contingencies also apply to any/all family members who may be relocating with the candidate. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $55,250 - $74,750. Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active) Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 1 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E – Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

AST SpaceMobile and our global partners are building the first and only space-based cellular broadband network to be accessible by standard smartphones. Called SpaceMobile, this ultra-powerful network is being designed to provide connectivity at 4G/5G speeds everywhere on the planet – on land, at sea and in flight. Solar Panel Engineer, Electrical and Power Systems RESPONSIBILITIES Layout and design of photovoltaic solar arrays. Perform sizing and power analysis, charging analysis, grounding and ESD for deployable solar arrays. Execute the non-recurring engineering in support of new solar cell device definition and existing technology optimization to meet interface and performance requirements. Design, and model electrical schematics, power harnessing and circuit boards. Develop and execute qualification campaigns for photovoltaic and electrical components including mechanical, thermal and radiation testing. Work closely with manufacturing engineering to develop and validate electrical interconnect processes such as welding and bonding. In coordination with the test engineer, promptly develop test content, test equipment, procedures, and tools, review, and implement the test. Collaborate with systems engineering on electrical de-rating and EEE parts lists. Proactively interface with multi-disciplinary team members to optimize component and system designs that meet all technical, cost and schedule requirements Apply engineering principles to ensure that designed components and systems meet all requirements. Utilize hardware-based techniques to perform research and development, iterate on design concepts, correlate engineering models, and develop manufacturing processes and procedures. Generate technical documentation, reporting and presentations of design, test, and analysis results BASIC QUALIFICATIONS Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science. 5+ years of relevant experience or equivalent in: Physics, Electronics, Electrical Engineering, Mechanical Engineering, Material Science, Industrial/Manufacturing Engineering, or similar field Familiarity with solar cell design and device physics, semiconductor processing, material characterization and analytical techniques: 5+ years of experience in analyzing technical data and providing clear written and verbal presentation of the results 5+ years of experience providing engineering support in a fast-paced manufacturing environment 2 years minimum work experience on Solar Modules, Solar Cells, or Solar Arrays. Experience using basic MS Office software tools including Word, Excel, and PowerPoint Proficiency with CAD (Computer Aided Design) and PLM (Product Lifecycle Management) systems. Experience working both independently and collaboratively as part of a team PREFERRED QUALIFICATIONS Experience with alternative space solar technologies (multi-junction, thin-film, etc.) Design experience with Solar Arrays for Space Applications. Familiarity with satellite power systems and LEO environment effects Background in cost modeling and manufacturing process optimization Experience with machine learning applications in degradation modeling Knowledge of statistical analysis, statistical process control, lean principles Understanding of fundamental circuit design and analysis Hands-on experience in assembling and testing electronic components including environmental testing Familiarity with environmental effects (radiation, temperature, ESD, atomic oxygen, etc.) on semiconductor devices and associated design and analysis techniques for evaluating performance under a wide range of potential operating conditions Familiarity with gated approach to product & process development and Aerospace industry material and qualification requirements (such as AIAA-S-111/112, NASA-STD-6016, and/or equivalent ECSS standards) Experience participating in or leading Root Cause/Corrective Action investigations (RCCA) and/or Design for Manufacturing Assembly & Test (DFMAT) initiatives Proficiency in problem solving complex issues. Familiarity with developing and implementing targeted process automation or other continuous improvement initiatives for both production and production support environments Experience working with interdisciplinary teams to execute product design from concept to production Experience with the project management of technical projects Master’s degree in Mechanical, Aerospace, Electrical, Materials Science, or equivalent. Experience writing code in Python or other coding languages. Experience using Siemen's NX and TeamCenter for CAD and PLM software respectively. AST SpaceMobile is an Equal Opportunity, at will Employer; employment is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.