Auto-apply to these electrical jobs

KEY RESPONSIBILITIES: Developing, preparing, and executing on capital improvement ideas and projects from the beginning through completion. Writing and or approving engineering specifications. Designs, and spare parts lists. Developing, recommending, and implementing migration paths for obsolete controls and components. Performing, planning, scheduling, coordinating, and directing installation of new or existing components on all projects, including project status reports as required. Responsible for establishment of priorities with Reliability and energy conservation in mind. Responsible for managing, directing, executing all assigned area capital projects. Responsible for maintenance area equipment drawings, including drawing changes and updates. Must work with vendors to assure complete updated drawing management. Responsible for monthly energy reporting and plants Wonderware SCADA system operation. Providing high voltage electrical engineering support for the plants distribution systems and equipment. Seve as the assigned technical expert for projects managed by other Project Managers. Accountable for the technical support of assigned facility maintenance area and daily problem solving/root cause analysis with the goal of increasing OEE. Accountable for communicating with maintenance, operation supervisors, and process engineers solving and preventing various issues for the mill. Applies guidelines, practices and procedures of Reliability Based Maintenance, Safety, Environmental, Quality Contro, and Energy Conservation. #LI-JB1 #LI-Onsite EXPERIENCE, SKILLS, AND KNOWLEDGE: Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical skills: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Mechanical, electrical, leadership and engineering experience EDUCATION, TRAINING, AND CERTIFICATIONS: BS Engineering Electrical and preferred minimum 5 years in manufacturing or heavy industrial equipment environment. CRITICAL COMPETENCIES & CAPABILITIES: Safety awareness Directability Teamwork Adaptability Accountability Reliability/dependability Initiative Ability to receive and provide constructive feedback Pride in performance Continuous Improvement/Quality Communication Positive responses to change High attention to detail

Job Description Evergreen Innovation Group, part of the DPR Family of Companies, is seeking a Senior Electrical Superintendent. This is a critical leadership role responsible for providing direction to the project team to complete the project on time while maintaining a high-level of quality, safety and customer loyalty. The Senior Electrical Superintendent has significant impact on the success of the company and delivering on our mission. They will ensure that all work installed is completed in accordance with the standards set forth by EIG, LLC-all work will be completed on budget, on time, and in accordance with all applicable plans, specifications, codes, and industry standards. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities Manage, evaluate, and develop field project team members, specifically assistant superintendents. Duties and Responsibilities Demonstrates understanding and enthusiastic agreement with the vision and mission of EIG. Plan, organize, and direct production of contracted scope of work. Professionally represent EIG with DPR, inspectors, and other trades Coordinate production and attend meetings with DPR and other trades. Identify and resolve conflicts in a timely manner. Ensure all installations meet quality and electrical code standards. Manage material and personnel requirements necessary to meet the construction schedule. Establish, adjust, and maintain work sequences and logistics to meet the construction schedule. Monitoring job costing, quality reporting, forecasting, and productivity. Complete and comprehensive understanding of contract documents, plans, and specifications for projects. Lead EIG's standards of safety (IFE), quality, and CBPs. Required Skills and Abilities Experience in verifying the compliance and functionality of installations of power systems (lighting, fire protection, security, and data networks). Excellent interpersonal and communication skills to include both written and verbal communication. Proficient computer skills and experience with Microsoft Office Suite. Detail-oriented and well-organized. Experience with project documenting and record keeping. Experience studying work orders, building plans, and installation manuals to determine materials requirements and installations procedures. Experience installing and mounting electronic controls, device panels, sensors, and components. Experience installing, assembling, testing, and maintaining electrical or electronic wiring, conduit, wiring, cable, equipment, components, and devices associated with electrical equipment following drawings of electrical layouts and building plans. Experience testing electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices. Ability to appropriately diagnose malfunctions in systems, apparatus, and components using test equipment and hand tools and take appropriate steps to correct the problem. Ability to instruct and train workers to install electrical wiring, equipment, and fixtures. Proficient knowledge and understanding of the latest edition of the NEC, local codes, and construction safety requirements. Ability to identify and resolve complex issues. Effective participation in team environment. A strong work ethic and a "can-do" attitude. Education and Experience Stable employment history. Pass a background check, including drug test. Valid Driver's License. 7 - 10+ years of supervising Electrical Commercial Construction. 15+ years of Electrical Commercial Construction field experience. Active journeyman or master electrical license preferred. Physical Requirements Exposure to temperatures and varying inside conditions. Continual walking, standing, climbing, stooping, bending, kneeling, reaching, and heavy lifting and carrying. Some travel possible. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at www.dpr.com/careers.

About the Role: We are seeking a skilled and dedicated Electrical Engineer to join our Data Center Engineering team. As a Data Center Electrical Engineer, you will be responsible for leading projects with focus on data collection of system IEDs, logic controls, and the presentation of data for the data center customers to monitor and control their power system. Utilizing real-time logic controllers and communication equipment, the SEL ES Automation engineer owns the planning, design, development, testing and commissioning of the project. Projects often include: Communication network equipment Configuration of real-time controllers to serve as RTUs. Human Machine Interface (HMI) or server to an upstream SCADA client. Configuration of real-time controllers to perform custom logic such as automatic system fault location, isolation and restoration. Configuration of workstations for power system analytic software Location: Open to multiple US Locations: Phoenix, AZ; Irvine or Vacaville, CA; Alpharetta, GA; West Lafayette, IN; Plymouth, MI; Charlotte, NC; Houston, TX. Experience Level: Minimum of 5+ years in power system automation systems Key Responsibilities: Serve as technical lead and actively participate in design, execution, development, and support activities across multiple projects. Lead and execute technical projects with a team, manage customer expectations, and deliver high quality project deliverables. Resolve customer concerns and foster customer satisfaction. Ensure project team deliverables are within agreed upon scope, schedule, and budget to a high level of quality and safety. Lead projects that may involve: Research of SEL equipment, third-party equipment and solutions Branching into OT network solutions (Layer 1, Layer 2 Architecture and Applications Data Flow) Research of emerging technologies and trends within and beyond their focus area. Create high quality deliverables on projects including: Device settings Automation Design Specifications and drawings Product configurations Factory testing and procedures Field safety preparations and commissioning procedures Service reports Identify, prepare and present successful proposals for SEL equipment, services, and systems. Participate in business development activities, onsite or remote, by presenting SEL products and solutions to data center customers while following and applying SEL Values, Principles of Operations, and World Class Manufacturing Principles. Collaborate with cross-functional teams, including project managers, engineers, and technicians, to assess system requirements and implement protection strategies accordingly. Willing to travel at least 25% of the time. Required Skills & Qualifications: Have a B.S. degree in electrical engineering or relevant discipline Have knowledge of power system protection principles, relay protection, control and automation schemes. Designing of control logic schemes and network configurations Ability to understand electrical one-line drawings, DC/AC Schematics, and Bill of Materials Experience with industry standard communication protocols (IEC-61850, DNP3, Modbus, C37.118 etc.) Experience with server/client SCADA applications Experience with design/development suite of HMI applications using Ignition, Zenon, etc. Why Join Us? Work on cutting-edge power system protection solutions that drive the future of data centers. Be part of a collaborative, innovative team dedicated to mission-critical electrical infrastructure. Competitive compensation and opportunities for professional growth. We are 100% employee owned. Retirement benefits include an employer funded stock ownership plan (ESOP) and personal 401(k) options. Don't miss this opportunity to make a difference in the electrical power industry. Join Schweitzer Engineering Laboratories and help shape the future of critical infrastructure! Competitive pay. Superior benefits. Inspiring work. People are at the core of our company and we hire employee-owners. We welcome you to learn more about how we support employees. We're 100% employee owned. Retirement benefits include an employer funded stock ownership plan (ESOP) and personal 401(k) options. We offer top tier medical, prescription, dental, vision, life, and disability insurance. We recognize the importance of a healthy life balance and offer: 10 paid holidays, annual vacation accrual starting at 12 days, 9 paid sick days, and paid family and medical leave that covers 90% of your pay. We foster growth and development of our employees through avenues such as STEM courses, apprenticeships, tuition assistance, and engineering development programs. Ask our team about other benefits including wellness, fertility, adoption, and flexible spending benefits. Pay Range Data Project Engineer III $120,000-160,000 per year. Our pay ranges are determined by job, responsibility, and location. We base our starting pay offer and title on location and job-related factors such as candidate experience, training, knowledge, and skills. Communication with Applicants We communicate with all applicants. If you do not receive a response about your application, please check your SPAM filter or reach out to us at careers@selinc.com. SEL is an Equal Opportunity Employer: Vets/Disabled.

Who is Re:Build Manufacturing Re:Build Manufacturing, LLC (Re:Build) is a rapidly growing family of industrial businesses combining enabling technologies, operational superiority, and strategic M&A to build America's next generation industrial company. At Re:Build we deploy deep expertise in operations management and technology to supercharge performance of our subsidiaries by implementing core technologies across industrial platforms in diverse growth markets. Our goal is to help revitalize the U.S. manufacturing base over the coming decades, creating substantial opportunities for our employees and the communities where we operate. We leverage deep professional expertise and a candid, principled operating culture to drive differentiated outcomes for our customers, our employees, our communities and our investors. Ours is a fast-paced environment where individuals can stretch and be challenged with a wide variety of opportunities and projects. We empower and support our employees to pursue their fullest potential and provide meaningful avenues for personal and professional growth. About Re:Build Battery Solutions Re:Build Battery Solutions is a turnkey battery provider focused on the design, development and manufacturing of durable, high-quality battery packs for motive and stationary energy storage applications. We also offer custom and off-the-shelf battery management systems (BMS) and we design and build battery process lines. We are committed to strengthening the US battery value chain by providing reliable, cost-effective, domestic technology solutions and exceptional customer service. Re:Build Battery Solutions is part of Re:Build Manufacturing, a family of industrial businesses combining cutting-edge enabling technologies, operational superiority, and strategic M&A to build America's next-generation industrial company. Who we are looking for As the Battery Pack Electrical Design Engineer at Re:Build, you will play a pivotal role in the design and analysis of our pioneering battery solutions. Your expertise will directly influence key decisions to bring a diverse range of Re:Build battery modules and battery packs to market across various industries. You will lead the electrical design and analysis, collaborating closely on decision-making processes to launch our innovative battery solutions. This position supports all program phases, including concept development, detailed design, prototyping, comprehensive analysis, manufacturing, and testing. You'll be responsible for developing layouts, CAD models, and prototype models, and presenting high-quality results to customers and key business partners. Applying detailed analysis and simulations, you will accurately model critical performance parameters. Exceptional presentation and communication skills are essential to effectively convey complex technical information. To be successful in this role, you must have strong experience in electrical design and analysis, proven ability to develop and present high-quality technical results, and proficiency in CAD and prototype model development. Strong presentation and communication skills are crucial for this role. What you get to do Own the electrical design and development of lithium-ion battery systems for various applications, including electric vehicles, aerospace, renewable energy storage, and more. Work on improving battery performance, energy density, and safety. Identify core issues, develop solutions, and optimally communicate the impacts across internal and external teams. Create and deliver CAD models and presentations to customers. Conduct tests to evaluate battery performance under different conditions. Analyze data to identify potential improvements and ensure compliance with safety standards. Stay updated with the latest advancements in battery technology. Innovate new materials and methods to enhance battery performance. Handle schedules and tasking to go above and beyond Communicate across engineering teams to make program critical decisions. Work multi-functionally to verify battery software and hardware meet the system needs and battery pack requirements. Work closely with program management, engineering, procurement, and manufacturing to integrate battery systems into products. Ensure the battery design meets the overall product requirements. Ensure all battery designs follow key industry standards and regulations. Develop supporting material for design such as bill of materials, assembly, or installation procedures. What you bring to the Team 3 or more years of system design for lithium-ion battery packs or related technologies. Minimum 4 years of engineering experience for automotive, aerospace, industrial or related industries. Experience in design, developing and testing of battery systems for electrified propulsion or stationary energy storage. Excellent communication skills (verbal and written), including strong technical communication. Self-directed with strong leadership, team building, collaboration, communication, organizational skills, and a history of demonstrated problem solving ability. Strong time management and organizational skills Demonstrated ability and interest in working in a fast-paced team environment. Basic understanding of UL, or similar, and regulatory certification processes. Proficient with CAD programs such as CATIA or SolidWorks. Familiar with electrical layout, design, and analysis programs. Bachelor of Science in Electrical Engineering or similar with strong emphasis on practical work, and equivalent experience. Additional Preferred Qualifications: M.S. or PhD in Electrical Engineering or similar, with a strong emphasis on practical work or equivalent experience. 2 or more years of project management experience. Experience with BMS software development and control algorithms. Experience with mathematical modeling of batteries or experimental work in the field of batteries. Location Requirement: Position is based out of our Pittsburgh PA plant. The BIG payoff We are a company who is going to make a difference in the industries and the communities in which we choose to operate. Every employee of Re:Build will share ownership in the company and will share in the financial rewards of the success we achieve together, at all levels of the company! We want to work with people that reflect the communities in which we operate Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason. Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group! As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning. Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compensation to our flexible work schedule Monday to Thursday in the office for 9 hours and Friday for 4 hours remotely at home and fun social events, it is everything you will need for an exciting, challenging, and rewarding career. We are looking for an Electrical Engineer II - III in our San Diego, CA offices. Job Responsibilities As an Electrical Engineer II- III you will be responsible for creating basic designs under the direction of senior engineers and/or senior designers, performing equipment selections, and load/energy and pressure drop calculations for a variety of projects and project sizes. Individuals in this position must demonstrate the ability to progress from basic design work assignments to more complicated and involved projects working in conjunction with a technical team. Additional responsibilities include: Conducts field inspections to determine existing conditions and to coordinate new work then assists Senior Engineer in preparation of due diligence, feasibility, gap analysis and other technical reports and drawings. Coordinates with other disciplines and work in close contact with the entire design team Creates basic designs under the direction of the senior engineer and/or senior designer perform equipment selections, load/energy and pressure drop calculations for a variety of projects and project sizes Represent Syska Hennessy Group and work in close contact with and effectively interact with the internal design team as well as external clients and consultants (including owners, builders, developers, program managers, architects, vendors, etc.) Master drawing organization format and company standards Assists senior engineer and/or senior designer in the on-going determination of project scheduling requirements, manpower requirements, and project budgets. Assists the senior engineer / senior designer in processing RFI's, Change Orders, Bulletins, and Addenda Begins to establish system application, design, and operational parameters / sequences under the direction of the senior engineer and/or senior designer. Creates basic designs under the direction of the senior engineer and/or senior designer, develop specifications, system narratives and system layouts for a variety of projects and project sizes. Participates in / Ensure / Oversee QA/QC process for your work and the work of others. Performs construction administration and field investigation tasks for assigned projects including conducting field inspections and subsequent detailed inspections reports. Represents Syska Hennessy Group and works in close contact with and effectively interact with the internal design team as well as external clients and consultants (including owners, builders, developers, program managers, architects, vendors, etc. Job Requirements Successful candidates for the Electrical Engineer role should demonstrate strong REVIT, and MEP skills from mark-ups through the production of detailed drawings, and have basic knowledge of construction documentation and design phase requirements. Someone with knowledge of trade specific design and calculation software including energy analysis software (eQuest, Trace, etc.) would be a good fit for this dynamic role. Additional requirements include: Bachelor's Degree in Electrical Engineering from an Accredited Institution Minimum of 1.5+ to 6 years of relevant experience in the MEP field working with projects such as Aviation, Healthcare, Commercial, and Mission Critical. Latest version of AutoCAD MEP and REVIT required Basic understanding of proper system selection Basic knowledge of applicable codes FE certification required Experience in Mission Critical, Science + Technology, Healthcare and interest in Project Management greatly preferred. Benefits As an employee with Syska Hennessy Group, you will be part of a global firm with an amazing history! We are committed to being the best, advancing engineering design practice, and to supporting our clients with integrity. To make all of that happen, we rely on the talent, drive, enthusiasm, and total job satisfaction of the great people who work here. As a member of our highly collaborative team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The personal benefits program at Syska Hennessy Group includes: Medical, Dental, and Vision insurance 401(k) retirement plan with employer matching Individual and Dependent Life Insurance Short- and Long-Term Disability Tuition Reimbursement Health Wellness Programs, including flu shots and biometric screening Training and professional development courses and incentives Opportunities through partnerships and internal networks for community outreach A Generous Personal Time Off Program (PTO) Transit/parking program Monthly business phone stipend Work from home Fridays At Syska, we promote an environment that is committed to embedding diversity and equality into the core of our business and culture. We empower our employees so they can take ownership of their work and development and strive to continually improve themselves and our firm. Syska is a place where you can build an exceptional career and have a lasting impact on the world. Syska Hennessy Group | Integrating the best minds and technology to help clients create exceptional environments. The salary range listed below is for this particular job posting. Actual pay range for candidates will be commensurate with candidate's experience, skillsets and competencies and may differ based on the cost of labor in their particular location. California Pay range $78,838-$143,090 USD

Are you a driven professional looking for your next big challenge? We are currently building our talent pipeline for a potential client and are seeking enthusiastic individuals who are ready to make an impact. This is a unique opportunity to be considered for future roles as we expand our team to meet the needs of our growing client base. This role is perfect for a motivated engineer eager to gain hands-on industry experience, collaborate with industry experts, and grow within a company that prioritizes professional development. In this role, your key contributions will include: Electric Transmission and Distribution System Design: Work on designs for subdivisions, apartment complexes, and mixed-use developments, ensuring efficient and reliable service. Collaboration: Partner with Designers and Drafters to complete design packages, gaining hands-on experience with CAD and engineering analysis tools. Project Execution: Assist in ensuring projects meet technical specifications, scope, cost, schedule, and quality expectations. Industry Standards & Compliance: Apply knowledge of Rural Utilities Service (RUS) standards, National Electrical Safety Code (NESC), and utility-specific guidelines to create compliant designs. Leadership & Growth: Lead smaller projects independently while supporting senior engineers on more complex distribution projects. Minimum Qualifications: Bachelor's degree in Electrical Engineering or a related field from an accredited university Advanced level of professional experience Experience in Electric Distribution and/or Transmission, working directly with a utility or engineering firm on projects related to: Utility distribution network design and power system layouts Subdivision and apartment complex distribution systems, including underground and overhead layouts Pole line design, transformer sizing, and service planning for residential and commercial developments Exposure to utility design standards, permitting, and construction coordination Preferred Qualifications: Knowledge of CAD or MicroStation- Hands-on experience with design software is preferred Field Experience- Not required but beneficial in understanding real-world distribution challenges Why join us? Career Growth: Gain hands-on experience with opportunities for mentorship, technical training, and leadership development. Meaningful Work: Be part of projects that modernize and expand electric distribution networks, directly impacting communities. Collaborative Culture: Work with an experienced, supportive team of engineers, designers, and utility professionals. Ready to take the next step in your engineering career? Apply today and join ENTRUST Solutions Group, where your skills and ideas make a difference! #LI-KM2 Why Join Us? Be part of a forward-thinking company that values innovation, sustainability, and community impact. Work in a supportive and inclusive environment that encourages professional growth and development. Competitive salary and comprehensive benefits package. Opportunities for career advancement and continuous learning. Not quite right for you? For a full listing of all our openings, please visit us at: https://entrustsol.com/careers/ Who We Are: ENTRUST Solutions Group, an ENR Top 100 company, is a community of people, 3,000+ strong, who are committed to our clients and each other. We provide comprehensive and dependable engineering, consulting, and automation services to gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. In return for top talent, ENTRUST Solutions Group offers: Generous paid time off and benefits 401(k) retirement program with a company match Career development programs Tuition reimbursement Flexible work schedule To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at: https://www.linkedin.com/company/entrustsolutionsgroup Benefits & Salary: The salary for this role will be between $70,000 and $105,000 annually and is an exempt position. Benefits offered include company sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. Full time employees are eligible to earn PTO hours. May be eligible for discretionary bonus as determined by the company. ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST Solutions Group does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group. #LI-KM2

Dematic has immediate needs for all levels of Electrical Controls Engineers in our Customer Service Modernizations & Upgrades group! Candidates will have a minimum of 5-8 years of experience in controls engineering or proven 8+ years for senior level positions. Proficient candidates build assembly drawings, work with PLCs (Allen Bradley and/or Siemens), HMIs, and VFDs, and implement engineering projects. Employees can be based anywhere in the continental USA, however, must be willing to travel up to 40% to customer locations in the USA. Dematic is an intra-logistics innovator that designs, builds and supports intelligent, automated solutions for manufacturing, warehouse and distribution environments for customers that are powering the future of commerce. With engineering centers, manufacturing facilities and service centers located in more than 25 countries, Dematic's global network of 8,000 employees have helped achieve more than 6,000 worldwide customer installations for some of the world's leading brands. Headquartered in Atlanta, Dematic is a member of KION Group, a global leader in industrial trucks, supply chain solutions and related services, and a leading provider of warehouse automation. We offer: Career Development Competitive Compensation and Benefits Pay Transparency Global Opportunities Learn More Here: https://www.dematic.com/en-us/about/careers/what-we-offer Dematic provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Tasks and Qualifications: Dematic has immediate needs for all levels of Electrical Controls Engineers in our Customer Service Modernizations & Upgrades group! This is an outstanding opportunity to join a world-class team that is committed to delivering flawlessly engineered solutions and continuously elevating our standards. What You Will Do In This Role as an Electrical Controls Engineer: Complete the commissioning of sophisticated systems that integrate hardware and software. Design schematics and control panels. Recommend strategies for efficiency optimization, cost cutting, and elevated customer happiness. Perform complex technical interchange and knowledge transfer for both processes and application of products to system design. Carry out a full range of standard work for the professional field. Identify and resolve more complex problems, applying problem-solving skills to handle most situations. What You Will Do In This Role as a Sr. Electrical Controls Engineer: Develop highly sophisticated systems that integrate hardware and software. Build complex material specifications, schematic preparations, and appropriate follow-ups. Provide guidance for efficiency enhancement, cost savings, and customer delight improvement. Guide complex technical interchange and knowledge transfer for both processes and application of products to system design. Perform advanced areas of work for the professional field. Apply advanced skills to independently resolve complex problems not covered by existing procedures or practices, including developing new solutions. Display a high level of critical thinking to bring successful resolution to high-impact, complex, and/or cross-functional problems. Own the most complex projects, delegating tasks to lower-level engineers. What We Are Looking For: Bachelor of Science in electrical engineering or equivalent experience. 5 - 8 years of successful experience in related field for Electrical Controls Engineers. 8-10+ years of successful experience in related field for Senior Electrical Controls Engineers. Demonstrated and broad knowledge of the field of specialization through successful completion of moderately complex assignments. Demonstrated knowledge of the organization's business practices and issues. Proficiency in AutoCAD. Proficiency in either Rockwell or Siemens PLCs. Knowledge of AC drives, both open & closed loop. Experience in Ethernet IP network design and machine safety is a plus. Join us to help craft the future of automated solutions and be part of a team that values innovation, teamwork, and excellence! #li-dh1 #inpost

At HDR, our employee-owners are fully engaged in creating a welcoming environment where each of us is valued and respected, a place where everyone is empowered to bring their authentic selves and novel ideas to work every day. As we foster a culture of inclusion throughout our company and within our communities, we constantly ask ourselves: What is our impact on the world? Watch Our Story:' https://www.hdrinc.com/our-story ' Each and every role throughout our organization makes a difference in our ability to change the world for the better. Read further to learn how you could help make great things possible not only in your community, but around the world. Primary Responsibilities In the role of Substation Physical Electrical Engineering Intern, we'll count on you to: Focus on the Physical design of electrical substations. Perform assignments under the direct supervision of a Project Lead or Project Manager. Create/modify substation physical drawings including creating markups, specification of major equipment, and assisting with procurement of equipment. Apply industry standard engineering tools, techniques and procedures. Complete AC/DC System calculations based on current/future load. Perform other duties as needed As part of the team, you'll gain: Applicable industry experience to take with you throughout your studies or future career. Hands-on experience on exciting, real-world projects. A deeper, high-level understanding of the electrical power grid. Connections with recent college graduates and our company leaders through mentoring and young professionals' programs. Preferred Qualifications Prefer 2 years completed toward degree with 3.0 GPA Demonstrated knowledge of software packages related to field of study/industry Basic Microsoft Office skills; including Word, Excel and Outlook. Preference given to local candidates Required Qualifications Currently enrolled in an undergraduate or graduate Engineering program Attention to detail Possess strong problem-solving and communication skills Basic Microsoft Office skills An attitude and commitment to being an active participant of our employee-owned culture is a must What We Believe HDR is our company. Together, we build on each other's life experiences and perspectives to make great things possible every day. This shapes our collaborative culture, encourages organizational trust and connects us closer to the clients and communities we serve. Our Commitment As employee owners, we all have a role in creating an inclusive environment where each of us is welcomed, valued, respected and empowered to bring our authentic selves to work every day. Our eight Employee Network Groups (Asian Pacific, Black, Hispanic/Latino(a), LGBTQ , People with Disabilities, Veterans, Women, Young Professionals) help create a sense of belonging and foster a supportive environment where everyone is empowered to engage and contribute. Each group has an executive sponsor and is open to all employees.

Best People + Right Culture. These are the driving forces behind JE Dunn's success. By hiring inspired people, giving them interesting and challenging work, enabling them with innovative tools, and letting them share in the company's rewards, we've found a sustainable way to grow in our industry for the last 100+ years. Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection. JE Dunn's Advanced Facilities Group (AFG) combines Mission Critical, Advanced Industries, and Industrial & Manufacturing into one high-performing team focused on cutting-edge work to serve innovative clients on large Industrial & Manufacturing, Data Center, and Semiconductor projects. As part of the Advanced Facilities team, you'll work on some of the most advanced construction projects across the country, growing your career alongside our diverse team of industry professionals. Key Role Responsibilities- Core ME ENGINEER FAMILY- CORE Learns and actively participates in all aspects of the company's safety and quality plans and culture by demonstrating commitment to an injury-free environment through individual actions and mentoring others. Completes entry level and routine mechanical, electrical and field construction activities. Learns how to develop budgetary M/E estimates, based upon program and schematic design information using automated M/E estimating system. Assists in the review of mechanical and electrical options as part of the preconstruction process and completes systems analysis for select projects. Learns to develop the mechanical and electrical scopes of work used to coordinate during the bid process. Assists in the completion of bid analysis and provides input during the subcontractor selection process. Assists in developing sequencing requirements of various systems and providing solutions to meet the schedule requirements. Gains knowledge of design documents in order to identify potential quality problems to assist in developing constructability review reports. Learns to perform job inspections to ensure specifications and expectations are met and work is completed in a quality and timely manner. Learns and assists with the shop drawing/submittal process to comply with the contract documents. Assists with the commissioning process including developing pre-functional checklists, functional testing procedures and actual functional testing. Key Role Responsibilities- Additional Core SENIOR M/E ENGINEER In addition, this position will be responsible for the following: Completes increasingly complex mechanical, electrical and field construction activities. Develops budgetary M/E estimates, based upon program and schematic design information. Reviews mechanical and electrical options, completes systems analysis, recommends best system for the project and provides value engineering suggestions. Coordinates the mechanical and electrical scopes of work during the bid process. Develops sequencing requirements of various systems and provides solutions to meet the schedule requirements. Provides scheduling input during projects. Reviews design documents and identifies potential quality problems. Helps develop quality control programs. Performs job inspections at various times in the project to ensure specifications and expectations are met and work is completed in a quality manner. Develops pre-functional checklists and functional testing procedures. Verifies contractor's performance of functional test. Reviews and approves shop drawings prior to submitting to the design team. Generates and issues the Commissioning Plan for approval to the appropriate parties. Verifies deficiencies are corrected and submits commissioning documentation to owners. Provides mentoring to less experienced co-workers. Creates M/E tools and innovative solutions to continuously improve processes and work products. Negotiates subcontracts with subcontractors. Purchases equipment from equipment vendors for assigned projects. Builds relationships by being the direct face with the client. Participates in interviews for winning work, presentations and business development efforts. Represents the M/E department and JE Dunn at external community events. Assumes responsibility for resource allocation, staffing of their assigned projects and ensuring reimbursability requirements are met. Leads, supports and promotes a culture of diversity and inclusion within JE Dunn. Understands JE Dunn's policy of non-discrimination and ensures positive, proactive implementation throughout the organization. Knowledge, Skills & Abilities Ability to perform work accurately and completely, and in a timely manner. Communication skills, verbal and written (Advanced). Ability to conduct effective presentations (Advanced). Proficiency in MS Office (Advanced). Ability to read and understand plans, drawings and specifications. Proficiency in basic JE Dunn construction M/E tools and software. Ability to apply fundamentals of the means and methods of construction management to projects. Thorough knowledge of project processes and how each supports the successful completion of a project. Ability to build relationships with team members that transcend a project. Proficiency in required construction technology (Advanced). Proficiency in scheduling software (Intermediate). Proficiency in BIM (Building Information Modeling) (Intermediate). Ability to apply Lean process and philosophy (Advanced). Ability to manage budgets, maximize profitability and generate future work through building relationships (Advanced). Demonstrated knowledge of ASE and Lens (Intermediate). Ability to construct a project from start to finish. Ability to prepare the project budget, GMP or hard bid. Ability to complete range estimates. Ability to assist Marketing team with presentation and marketing activities. Ability to manage a team. Ability to build relationships and collaborate within a team, internally and externally. Education Bachelor's degree in mechanical engineering, electrical engineering, architectural engineering or related field (Required). In lieu of the above requirements, equivalent relevant experience will be considered. Experience 10+ years construction management experience (Preferred). Working Environment Valid and unrestricted drivers license required Benefits Information The benefits package aligned to this position is Professional Non-Union. Please click the link below for more details. Click here for benefits details. This role is expected to accept applications for at least three business days and may continue to be posted until a qualified applicant is selected or the position has been cancelled. JE Dunn Construction is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer and it is our policy to provide equal opportunity to all people without regard to race, color, religion, national origin, ancestry, marital status, veteran status, age, disability, pregnancy, genetic information, citizenship status, sex, sexual orientation, gender identity or any other legally protected category. JE Dunn Construction is a background screening, drug-free workplace. JE Dunn provides reasonable accommodations to qualified individuals with disabilities. If you would like to request a reasonable accommodation in order to apply for a job, please submit your request to accommodations@jedunn.com JE Dunn Construction Company does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of JE Dunn Construction without a prior written search agreement will be considered unsolicited and the property of JE Dunn Construction Company. Please, no phone calls or emails. Why People Work Here At JE Dunn we offer our employees an inspired place to enrich their life and the lives of those around them Building on our rich history, our employee owners are shaping the future of JE Dunn. In our team-focused environment we do life together and are generously rewarded for our efforts About JE Dunn For more information on who we are, click here. EEO NOTICES Know Your Rights: Workplace Discrimination is Illegal California Privacy Policy E-Verify JE Dunn participates in the Electronic Employment Eligibility Verification Program. E-Verify Participation (English and Spanish) Right to Work (English) Right to Work (Spanish)

Apply Job Type Full-time Description Join our ESOP-owned company and become a shareholder, directly benefiting from our collective success. We offer a robust Employee Stock Ownership Plan (ESOP), providing employees with a tangible stake in the company's growth. Becht Engineering BT, Inc. (Becht BT) is currently looking for an Electrical Design Engineer with at least 6 - 10 years of experience in the design of lighting and power systems for all building types to join our team in any of our office locations throughout the northeast and mid-Atlantic. The ideal candidate is an established engineer who has developed their design skills on a range of projects, has a solid understanding of mechanical system basics, and is looking to assume a more significant role in the development of the mechanical system designs. Requirements Candidates will have some (or all) of the following qualifications: PE License or willingness to obtain PE. Bachelor's Degree (or higher) in Electrical Engineering or Architectural Engineering (concentration in electrical design) 6 - 10 years of relevant professional experience in electrical building design Experience with AutoCAD is required Experience with Revit preferred Experience in some (or all) of the following project types: education, civic/government, financial services, retail, office, interior renovation, high tech/R&D, mission critical/data centers, and healthcare Knowledge of the LEED certification process (LEED Accreditation is a plus) Strong written and verbal communication skills required Proficiency in the use of Microsoft Office Suite (Word, Excel, Power Point, Outlook) required. Passion for sustainability Creativity and a passion for problem-solving and critical thinking Ability to collaborate in a team setting US Driver's license is required Ability to climb ladders, stairs, and access job site areas that are relevant to each client project. In addition to employee stock ownership and incentive-based compensation, we offer a generous benefits package, which includes: 100% Employee-Owned Company Health Insurance Coverage: Medical, Dental, Vision Flexible Spending Account Wellness Program Life and AD&D Insurance Long Term Disability Legal and Identity Shield Supplemental Insurance Telehealth Annual Biometric Screening Employee Assistance Program 401K Plan Company Holidays Floating Holiday Vacation Time Paid Sick Leave Volunteer Time Off Continuing Education Tuition Assistance Employee Referral Bonus Policy Professional Development Reimbursement Program Becht Merchandise Allowance We are an Equal Opportunity Employer. To be considered for this opportunity, submit a cover letter including salary requirements, resume, and previous relevant work experience. Salary Description $100,000.00 - $155,000.00

Project Manager As a Project Manager, you will be the central person responsible for bringing projects in on time, within budget, with quality workmanship, and meeting customer expectations. This role is responsible for scheduling and sequencing construction activities involving components such as labor, materials, equipment, and sub-contractors. You will also manage and resolve various conflicts that may arise on projects and ensure that the work environment is productive and safe. Must have an electrical background. Responsibilities The following duties and responsibilities are intended to describe the general nature and scope of work being performed by this position. Develop detailed and accurate project estimates utilizing estimating software. Participate actively in proposal development and acquisition of projects. Maintain accountability for project execution and successful completion. Accurately forecast project costs, expenses, and utilization of resources. Function as the primary contact with the client in delivery of project. Participate in transitional meetings with Division Managers and/or estimating department to review plans and specifications to gain understanding of project. Establish project objectives, procedures, and performance standards according to corporate policies. Interface with all project team members while promoting and maintaining open communication. Collaborate with co-workers and other supporting offices or divisions to achieve deliverables. Organize project documents and drawings using designated software according to corporate policies. Manage and direct subcontractors and material procurement. Manage day-to-day administrative items such as, RFIs, submittals, contracts, change orders, etc. Lead periodic project meetings internally and with the customer to ensure all deliverables are achieved. Implement lessons learned and strive for continuous improvement while embracing technology enhancements. Perform project close out and cost reconciliation. Coach and support project team members with tasks you assign them. Qualifications Must have 5+ years of electrical background. Must have 3+years of project management, estimating and cost control skills. Demonstrated understanding of civil, architectural, mechanical, and general construction techniques. Excellent interpersonal, conflict resolution and communication skills. Strong planning, leadership and team building skills. Proficient in the use of computerized systems and project management software - specifically MS Office, MS Project, Primavera (P6) and Accubid estimating software. Extensive knowledge of safety protocols and procedures. Ability to prioritize and manage multiple tasks, changing priorities, as necessary. Ability to work under time pressure and adapt to changing requirements with a positive attitude. Ability to be initiative-taking, proactive and an effective collaborator. Ability to interact effectively and professionally with all levels of employees, both management and staff alike, vendors, clients, and others. Valid driver's license with an acceptable driving record. Compensation: The minimum and maximum annual salary that O'Connell Electric Company, Inc. believes in good faith to be accurate for this position at the time of this posting is between $95,000 to $130,000 annually. It is important to O'Connell Electric that potential candidates for this position understand that compensation depends on numerous factors including the geographic location where the role will be performed, skills required, experience, complexity, travel, and market rate. O'Connell Electric aims to reward performance and attract top talent with competitive, fair pay and benefits. Please note that the top of the salary range represents exceptional, and/or senior-level positions, which meet all required qualifications. Actual offers take candidate's knowledge, skills, abilities, and experience into account. Equal Employment Opportunity: O'Connell Electric is an equal opportunity employer and prohibits discrimination and harassment of any type. O'Connell Electric affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. WHAT YOU WILL EXPERIENCE IN THIS POSITION: Develop and strengthen relationships at the assigned Strategic Distribution Partners to capitalize on sales harmonies, leverage nVent scale, and drive profitable growth across all nVent brands. These relationships should enable you to assess trends/conditions and translate these opportunities to deliver value to nVent. Build and implement growth-oriented business plans with Strategic Distribution Partners by gaining agreement, establishing measures of performance to drive mutual accountability, and leveraging action plans and KPI's to drive performance. Work collaboratively to ensure quality and responsiveness for all of the support provided, and continually strive to improve with the aim of offering a "superior ease of doing business experience". Work with cross-functional teams (sales, marketing, operations and finance) required to drive sales activity and achieve annual financial objectives. Monitors distributor orders/shipments/POS in relation to AOP and initiates corrective actions as necessary. Collaborate effectively with local sales teams to execute a specific sales strategy and activity. Although we have this posted to multiple locations, we will only be making 1 hire* YOU HAVE: Bachelor's degree or equivalent work experience accepted. Ideally, 7+ years in strategic account management or a distribution management role in the electrical or electronics space with a focus on online/ecommerce/e-Catalog accounts. Ideally, 3+ years distributor sales experience in an electrical, electronic, commercial, MRO, or industrial market, maintaining relationships and handling conflict at a senior level. Willingness to work 100% remotely and travel 25-50% of the time to visit customers, attend events, and support regional initiatives. A valid diverse license is required. Must have proficient written and verbal English skills for all roles, including the ability to effectively communicate both written and verbal. Ability to form relationships and leverage partnerships to drive forward the strategic plan. Consistently demonstrates alignment to organizational strategy to advance opportunities. Successfully able to negotiate by collaborating with others to arrive at a conclusion using compromise, persuasion, influence, rationale, and tact both internally and externally in a selling environment. Ability to handle distributor conflict while maintaining composure and integrity. Ability to collaborate with the sales team for the successful deployment of the business strategy. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at www.nvent.com. Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of total target cash pay for this job and the employee's work location. Total target cash is comprised of an employee's base salary and sales incentive target opportunity, when annual sales goals are achieved. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. If annual sales performance exceeds annual sales goals, the total target cash received may exceed the pay scale maximum reflected below. Total Target Cash Range: Geographic Region A: $137,200.00 - $254,800.00 + Geographic Region B: $140,100.00 - $260,300.00 + Geographic Region C: $152,900.00 - $283,900.00 + Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth. #LI-AG1 #LI-REMOTE

JLL empowers you to shape a brighter way. Our people at JLL and JLL Technologies are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients. We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful careers and to find a place where they belong. Whether you've got deep experience in commercial real estate, skilled trades or technology, or you're looking to apply your relevant experience to a new industry, join our team as we help shape a brighter way forward. Job Title: Electrical SME - Data Center Operations What this job involves: As an Electrician at JLL, you will play a critical role in maintaining the electrical infrastructure of mission-critical data center facilities. You'll ensure the reliable operation of high-voltage electrical systems, uninterruptible power supplies (UPS), generators, and power distribution units that support our clients' digital operations. This position requires expertise in complex electrical systems operating in a 24/7 environment where downtime is not an option. Your day-to-day tasks will include: Install, maintain, and repair electrical systems including switchgear, transformers, UPS systems, and emergency generators Perform preventive maintenance on critical power infrastructure including battery systems, automatic transfer switches, and power distribution units (PDUs) Troubleshoot electrical faults and power quality issues using advanced diagnostic equipment and monitoring systems Execute planned maintenance activities during scheduled maintenance windows to minimize client impact Respond to emergency electrical issues and power outages with urgency and precision Collaborate with facility engineers and technicians to optimize power efficiency and system reliability Maintain accurate documentation of all electrical work, including maintenance logs, incident reports, and system modifications Support electrical upgrades and expansions to accommodate growing data center capacity requirements Ensure compliance with all electrical codes, safety regulations, and data center industry standards Desired experience and technical skills: Requirements: Valid Journeyman Electrician license in applicable jurisdiction Minimum 5 years of commercial or industrial electrical experience Experience with high-voltage electrical systems (480V-13.8kV) Knowledge of UPS systems, generators, and automatic transfer switches Ability to read and interpret electrical schematics, one-line diagrams, and technical documentation Strong troubleshooting skills using multimeters, oscilloscopes, and power quality analyzers Physical ability to work in confined spaces, at heights, and lift up to 50 lbs Availability for on-call emergency response and flexible scheduling Preferred: Data center or mission-critical facility experience Experience with Schneider Electric, Eaton, or similar UPS/power equipment Knowledge of building automation systems (BAS) and electrical monitoring platforms OSHA 30-Hour Construction certification Arc flash safety training and certification Associate degree in Electrical Technology or related field Experience with medium voltage switchgear and electrical distribution systems Location: On-site -Abilene, TX If this job description resonates with you, we encourage you to apply, even if you don't meet all the requirements. We're interested in getting to know you and what you bring to the table! Personalized benefits that support personal well-being and growth: JLL recognizes the impact that the workplace can have on your wellness, so we offer a supportive culture and comprehensive benefits package that prioritizes mental, physical and emotional health. Some of these benefits may include: 401(k) plan with matching company contributions Comprehensive Medical, Dental & Vision Care Paid parental leave at 100% of salary Paid Time Off and Company Holidays JLL Privacy Notice Jones Lang LaSalle (JLL), together with its subsidiaries and affiliates, is a leading global provider of real estate and investment management services. We take our responsibility to protect the personal information provided to us seriously. Generally the personal information we collect from you are for the purposes of processing in connection with JLL's recruitment process. We endeavour to keep your personal information secure with appropriate level of security and keep for as long as we need it for legitimate business or legal reasons. We will then delete it safely and securely. For more information about how JLL processes your personal data, please view our Candidate Privacy Statement. For additional details please see our career site pages for each country. For candidates in the United States, please see a full copy of our Equal Employment Opportunity policy here. Jones Lang LaSalle ("JLL") is an Equal Opportunity Employer and is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process - including the online application and/or overall selection process - you may email us at accomodationrequest@am.jll.com. This email is only to request an accommodation. Please direct any other general recruiting inquiries to our Contact Us page > I want to work for JLL. Accepting applications on an ongoing basis until candidate identified.

list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #SIC #LI On-Site #LI-VB1

Under the close and immediate supervision of an engineering mentor, Entry Level Engineers perform routine aspects of engineering assignments requiring knowledge and application of basic engineering principles. Key contributions include performing basic calculations, studies, drawing preparation, and providing technical support to construction staff. This role is largely focused on the ongoing development and application of knowledge of commonly-used concepts, practices, and procedures within a particular field. Job Responsibilities Develops understanding of assigned client standards, policies and procedures by reading and applying specific design guides, standards, systems and applicable engineering codes. Develops an understanding and complies with Commonwealth Associates quality program. Supports continuous improvement and change management efforts by proactively presenting leadership with new suggestions around process and practices innovation. Takes ownership of one's own professional development, striving for high-quality performance; remains self-aware and seeks support, guidance, and mentorship from other more experienced engineers. Attends internal and external client meetings, conference calls and client site visits accompanied by a mentor. In collaboration with the Business Development department, represents the company's emerging professional engineers at career fairs as needed. Supports the needs of the internal project team while gaining basic understanding of external client's main interests, expectations and drivers. Coordinates with project teams, cross-functional teams and other groups within the company to provide information and assistance as directed. Works with administrative staff to coordinate tasks and prepare documents. Collects, assimilates, and manages data for engineering work. Contributes to preparation of engineering deliverables such as drawings, reports, specifications, and studies of limited scope. Performs routine research and develops recommendations for equipment and/or materials selection. Prepares basic engineering calculations following standard methods and principles used in similar engineering analysis. Understands and works within budgeted hours, schedule, and quality requirements. Completes expense reports and timesheets in a timely and accurate manner and seeks direction from supervisor when conflicts arise. Remains aware and demonstrates understanding of project scope management.

Stanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth matters, and your success is our success. Stanley Consultants offers flexible work options, competitive pay and great benefits, a strong sense of community, and the chance to build a meaningful, long-term career! Job Title- Senior Plant Electrical Designer Location- Austin, Texas Job Type- Hybrid, Onsite, Remote #LI-JM1 Stanley Consultants is looking for a Senior Plant Electrical Designer for our Austin, Texas office. We are seeking a skilled Senior Plant Electrical Designer to join our team, specializing in physical design for power plant and industrial plant projects. This role requires in-depth knowledge of industrial construction to develop electrical system designs with minimal, high-level input from engineers. The role requires proficiency in 3D and 2D computer aided design (CAD) software. What You Will Be Doing: Electrical Design: Equipment arrangements. Underground duct bank layouts. Conduit and cable tray layouts. One-lines, schematics, and wiring diagrams. Installation details. Lighting and grounding systems. Produce detailed design drawings for construction, including: Translate general project requirements into working electrical designs using 3D and 2D CAD software. Apply knowledge of construction processes and field experience. Ensure designs align with project specifications, industry standards, and quality control processes. Knowledge of codes and standards include NEC, NFPA, IEEE, API, IBC, IFC. Validate designs against constructability and maintainability requirements. Incorporate equipment suppliers' submittals into electrical designs. Collaboration: Work closely with electrical engineers and other team members. Integrate electrical designs into multi-disciplinary models (e.g., mechanical, structural) for seamless project coordination. Solicit technical input from equipment and material suppliers. Assist in mentoring junior designers and engineers on best practices in 3D CAD modeling, power plant design, and industrial plant design. Quality Assurance: Participate in design reviews, ensuring accuracy and quality of electrical designs to meet project requirements and industry standards. Coordinate with the engineering team to resolve design-related issues and support construction activities. Required Qualifications: 10-years of electrical drafting/design experience. Experience in power generation or industrial electrical design. Familiarity with power plant construction standards and processes. 10+ years of experience in electrical design for power plants or similar industrial environments. Proficiency in 3D and 2D AutoCAD software with a strong focus on electrical system design. Strong collaboration skills to work effectively with multidisciplinary teams. Ability to communicate technical concepts clearly to engineers and other stakeholders. Ability to troubleshoot and resolve design challenges in a fast-paced environment. Preferred Qualifications: Bently Raceway Cable Management (BRCM) experience. Experience in mentoring and development of junior staff. This position primarily operates in an office environment but will require visits to plants and construction sites. Stanley's Approach to Flexibility While some members choose to work out of their local office on a full-time basis, we offer a hybrid schedule for eligible positions consisting of two days a week in the office, two days a week remotely, and Friday being a flexible day that can be worked either in the office or at home. Eligible roles can also offer a compressed workweek schedule. Members who participate will be assigned a 9/80 work schedule, meaning every other Friday off! What we offer: Member-Owned. Member-ownership is at the heart of our culture, aligning client satisfaction, company performance, and personal reward. Work-Life Balance. We realize there's more to life than just work. Paid Time Away. Stanley Consultants offers numerous paid holidays, generous paid time off (PTO), parental leave, and professional development leave. Health Portfolio. We provide a comprehensive portfolio of health services including medical, dental, vision, FSA, HSA, Doctor On Demand, wellness reimbursement, and mental health resources. Financial Health. We offer life insurance, short- and long-term disability insurance, identity theft protection, and many other benefits. Professional Growth. When your skills grow, so do we, which is why we offer tuition assistance, professional society membership, and more. Financial Rewards. We share our prosperity with members through company stock ownership, a generous 401K match, incentive compensation, and profit-sharing contributions to retirement 401K plans. Click Here: A Great Place To Work Learn more about Stanley Consultants in this short video: Working at Stanley Consultants Stanley Consultants does not welcome unsolicited resumes from staffing and recruiting agencies. Any unsolicited resumes submitted to Stanley Consultants, including but not limited to resumes submitted directly to Stanley Consultants members, or any of our representatives, will be deemed the property of Stanley Consultants. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Apply Job Type Internship Description As an Intern Electrical Engineer at CDG Engineers, you will be a key player in developing innovative solutions to complex engineering challenges. You will work alongside the EE team to design and implement electrical systems for a variety of industries, including power utilities, renewable energy, and heavy industrial. Your ability to learn new technologies quickly and your commitment to quality will be essential to your success in this role. Requirements for the role: Bachelor's degree in Electrical Engineering - currently enrolled in school as a Junior graduating in 2027, or a Senior graduating in 2026. Demonstrated class/academic expertise in any core area of: T&D Substation design Renewable Energy- Solar, BESS, Electrification Power Engineering with a focus on heavy industrial systems Automation Engineering or Programming- PLC, DCS, or SCADA Systems System Relaying Working ability with AutoCAD, Revit, or similar design tools preferred. Working knowledge of PVsyst or similar solar design software Working knowledge of SKM, ETAP, or similar electrical modeling software preferred. Working knowledge of electric utility industry and environmental issues Why CDG Engineers? CDG Engineers, Inc. is a full-service, multi-discipline professional services organization based in St Louis, MO, with capabilities in civil, structural, electrical, and mechanical engineering, as well as architecture. The firm provides planning, engineering, architectural design, and construction administration services across various industries and sectors. CDG Engineers is registered in multiple states across the U.S., offering complete in-house professional engineering and architectural services. The firm has a strong reputation for delivering practical and cost-effective solutions for a wide range of projects within the United States. CDG is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, genetic information, gender identity, disability, protected veteran status, or any other characteristic protected by law. Work Authorization: CDG is not currently offering sponsorship for this role. This includes both temporary visa or permanent visa situations that exist now or in the future, such as: F-1, OPT, CPT, H1, H2, L1, TN, etc. Agencies: This role is currently not open to agencies or third-party vendors at this time.

Job Summary: The position of Electrical Engineer I in the Service Mobile Products Group will act as the primary medium between the Electrical design, Mobile Design and Engineering, Mobile Production and Mobile Project Management. This role would serve as both the in-house conduit and lead to capture, document, communicate, advise, and receive all related electrical information that exists and changes during the scope of the project. This person will closely follow and observe how the electrical design's intentions become realized, applied, and implemented during Mobile Production. This engineer would provide practical, everyday knowledge and expertise in both understanding and communicating the questions and issues that always arise during pre-production, production, and post-production phases, as it pertains to the electrical wiring network. This person would ensure a keen and experienced eye is always focused on the soundness of the electrical wiring and device layout, the proficiency of the implementation and the quality of the testing and evaluation. Having this person consistently involved at different steps in the process will allow for a more comprehensive and informed approach to all aspects of the Mobile electrical designs that can be difficult to fully gauge due to the complex intricacies and nuances inherent in electrical wiring execution and the sometimes-large scale of such designs. Essential Responsibilities: Engineer will work alongside Mobile Engineering, before Customer Approval Drawing submittal, to consult on the best locations of HV equipment, as well as assessing the accessibility of such equipment after installation and the ease of maintenance. Ensure Mobile Production has the latest and most up to date revision of the electrical drawings as revisions occur, verifying that obsolete designs are not followed. Be the primary lead in receiving proposed changes to the electrical drawings and assist in evaluating the received feedback on the drawings. Assist the Chief engineer/Project Manager in communicating proposed changes to the electrical drawings to the customer and assist in evaluating the received feedback on the drawings from this said customer. Work with the Service Production and Engineering teams in designing the most efficient and effective layout for routing the rigid, flexible conduit before installation of such. Work with the Service Production and Engineering teams in designing the most efficient and effective layout of Junction Boxes before installation of such. If deviations to the electrical drawings are proposed, by either this Engineer or another, before or during Mobile Production, assist in assessing, in conjunction with Mobile Engineering and Production teams, whether this deviation is warranted and presents a safer and more effective upgrade over the current design. If such deviation proposed is agreed upon by all aforementioned parties, then this engineer will lead in capturing this proposed change and revising it on the design drawings. Capture and document any changes or deviations from the electrical drawings before or during Mobile Production, as it pertains to the wiring and layout of the As-built Mobile. Perform point-to-point wiring tests and other related tests on the electrical wiring network of the As-built Mobile as to ensure the integrity of the electrical layout and wiring design and the functionality of the Mobile. Compare the results of the point-to-point wiring tests and/or other tests to the most recent version of the electrical drawings. Update the electrical drawings, via AutoCAD, as needed, to match the As-Built Mobile. Troubleshoot and resolve electrical wiring/design problems during Mobile Production. Assist in determining the specifications of electrical and electronic devices that warrant unexpected procurement during Mobile production, as can happen with new projects. Work alongside third-party test groups, advising on the nature of the electrical layout and wiring design and answering questions raised by this test group. Verify results of the third-party testing group, as it pertains to the point-to-point wiring and the electrical and electronic device layouts. Assist in verifying and corroborating the electrical functionality descriptions and instructions required for entry in the Post-Production Customer User Manuals Job Requirements: Bachelor's degree in electrical engineering Minimum of 5yrs. Design in the electric power industry Fundamental understanding of power systems and substation design Ability to create and edit AutoCAD Electrical Drawings Knowledge and experience with electrical relays, protection, and control

ELECTRICAL ENGINEER INTERN Engineering interns work alongside electrical engineers and project management personnel to support the company's Technical Services Division in delivering a comprehensive suite of services for our customers. Students will be exposed to both an office and field work environment within utility substations, non-utility electrical rooms and substations, wind farm facilities, solar generation facilities, municipal water, and sewer treatment plants, along with other electrical construction environments. Field work will be conducted under the supervision of engineering and electrical technician personnel. Internships at O'Connell Electric offer students' great opportunities to incorporate classroom learning into professional, real world situations. Typical activities throughout an internship include, but are not limited to: Attending project meetings Preparing project documentation including drawings, test sheets, schedules, etc. Conducting site visits with assigned supervisor Gaining hands on field experience by participating in testing and commissioning tasks including: Lift/land logs and assisting electricians in wiring changes Relay testing Communication and automation testing Field engineering drawings Drawing markups Assisting teams with apparatus testing General troubleshooting Creating data collection, one lines for field teams Creating electrical models for engineering studies Assisting with creating engineering reports Analyzing electrical waveforms and COMTRADE files for post event analysis Assisting engineering team with troubleshooting and emergency calls Education Requirements and Key Competencies for Success: Current student as a sophomore - graduate level studies actively enrolled in an engineering or related undergraduate or graduate program A desire to work in, or explore the field of electrical engineering Should have completed some relevant coursework that can be applied to experiential learning during an internship Strong technical writing, analytical and communication skills Detail-oriented with a strong emphasis on quality work deliverables Strong work ethic and a high level of integrity Compensation: The minimum and maximum annual salary (or hourly rates) that O'Connell Electric Company, Inc. believes in good faith to be accurate for this position at the time of this posting are $17.00 to $20.00 per hour. It is important to O'Connell Electric that potential candidates for this position understand that compensation depends on numerous factors including the geographic location where the role will be performed, skills required, experience, complexity, travel, and market rate. O'Connell Electric aims to reward performance and attract top talent with competitive, fair pay and benefits. Please note that the top of the salary range represents exceptional, and/or senior-level positions, that meets all required qualifications. Actual offers take candidate's knowledge, skills, abilities, and experience into account. Equal Opportunity: O'Connell Electric is an equal opportunity employer and prohibits discrimination and harassment of any type. O'Connell Electric affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.